CyberPower CPUAC600 User Manual

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower CPUAC600 Surge

Protector. This manual explains the features and operation of the

CPUAC600. Please take a few moments to read this manual.

WARNING

IDENTIFYING THE CORRECT VOLTAGE AND POLARITY

SETTINGS FOR THE CONNECT EQUIPMENT AND ADJUSTING

THE PRODUCT ACCORDINGLY IS THE USER’S RESPONSIBILITY.

Caution:

This device is intended to input 120V AC power, all

necessary safety precautions should be followed. Not

recommended for use by children.

Failure to adjust the adaptor settings to match the requirements

of the connected device can result in damage to the device.

1.

Identify the correct plug tip that fits in the device you wish

to power.

2. Identify the polarity required for the device you are connecting.

The polarity will typically be identified in either the user’s

manual or on the input specifications on the device itself (see

‘Polarity Markings’ section). Turn the tip you are inserting into

the adaptor cord so that the ‘



’ text on the tip lines up with

either the ‘+’ or ‘–’ symbol on the adaptor cord depending on

whether positive ‘+’ or negative ‘–’ polarity is required. If the

device is not polarized, either setting can be used. If the device

does not have a polarity specification, contact the manufacturer

of the device and ask them. Using an incorrect polarity can

damage the device.

3. Set the voltage switch to the required voltage for the device you

are connecting. The voltage required will typically be identified

in either the user’s manual or on the input specifications on the

device itself. If you cannot determine the proper voltage,

contact the manufacturer of the device and ask them. Using an

incorrect voltage can damage the device.

4. Plug the adaptor cord into the device then plug the AC power

cord for the adaptor into a standard 120V outlet. If the device

does not function, unplug the AC power cord from the outlet

immediately. Check to make sure the voltage and polarity

settings being used are correct.

DETACHABLE PLUGS

• 2.5 (OD) x 0.75 (ID) x 10.5 ±0.5 (L) - Yellow

• 3.0 (OD) x 1.00 (ID) x 10.5 ±0.5 (L) - Black

• 3.5 (OD) x 1.35 (ID) x 10.5 ±0.5 (L) - Red

• 4.0 (OD) x 1.70 (ID) x 11.0 ±0.5 (L) - Yellow

• 5.5 (OD) x 1.50 (ID) x 12.2 ±0.5 (L) - Black

• 5.5 (OD) x 2.10 (ID) x 12.0 ±0.5 (L) - Blue

• 5.5 (OD) x 2.50 (ID) x 12.0 ±0.5 (L) - White

POLARITY MARKINGS

When looking for polarity markings on the device you wish to

power with the CyberPower Universal AC adapter, they will

typically be identified as such:

USER MANUAL

Universal AC Adapter

CPUAC600

Universal AC Adapter

CPUAC600

1

2

Copyright © 2019 Cyber Power Systems (USA), Inc. All rights reserved.

4.5

6

7.5

9

12

3

Voltage Selector

Up to 600mA

Positive Polarity

Negative Polarity

Depending on the device, the orientation of the positive and

negative poles in the depiction may be reversed but, if the

device requires positive polarity, the ‘–’ symbol will be on the

side with the ‘C’ shaped arc. If negative polarity is required, the

‘+’ symbol will be on the side with the ‘C’ shaped arc.

TECHNICAL SUPPORT

Please contact our Tech Support Department with installation,

troubleshooting, or general product questions.

• Phone: 1-877-297-6937

• Email: [email protected]

• Hours of Operation:

Monday – Friday 7:00am – 6:00pm CST

CyberPower CPUAC600 User Manual

CyberPower CPUAC600 Manual

CyberPower CPUAC600 manual content summary: