CyberPower CR25U40001 User Manual
CyberPower CR25U40001 Manual
 |
View all CyberPower CR25U40001 manuals
Add to My Manuals
Save this manual to your list of manuals |
CyberPower CR25U40001 manual content summary:
- CyberPower CR25U40001 | User Manual - Page 1
USER'S MANUAL 4-Post Open Frame Rack SAVE THESE INSTRUCTIONS Please read this manual and follow the instructions for installation and use. Copyright © 2016 CyberPower Systems, Inc. All rights reserved. K01-0000547-00 - CyberPower CR25U40001 | User Manual - Page 2
Table of Contents Parts List 1 Rack Assembly 2 Accessory Installation 4 Leveling Feet 4 Cable Management Rings 4 Grounding Cable 5 i - CyberPower CR25U40001 | User Manual - Page 3
Parts List No. Part Qty Rack Components 1 Left Vertical Rail 2 2 Right Vertical Rail 2 3 Base Bracket 2 4 Corner Section 8 5 Center Section 4 6 Top Bracket 2 Rack Assembly Hardware 7 M8 Bolt 48 8 M8 Washer 48 Rack Assembly Tool 9 M8 (13mm) Wrench 1 10 Phillips - CyberPower CR25U40001 | User Manual - Page 4
Rack Assembly Please check packaging contents before starting to assemble. 1. Assemble the top and bottom beams (4-total) as shown below. Refer to the table below to identify the desired mounting depth (22" to 40" available) and assemble corner and center sections at the corresponding index numbers - CyberPower CR25U40001 | User Manual - Page 5
2. Using two of the beams assembled in step 1, line up one left and one right vertical rails, followed by a base and top bracket and bolt together using M8 bolts with washers as shown below. NOTE: To facilitate final assembly, it is recommended to hand-tighten the bolts first. After all parts have - CyberPower CR25U40001 | User Manual - Page 6
Accessory Installation (Optional) Leveling Feet Bolt the included leveling feet (4pcs) to the bottom of the base bracket as shown below. NOTE: Optional caster kit shown is available. Please contact your sales representative for ordering information. 19 Cable Management Rings Screw the included cable - CyberPower CR25U40001 | User Manual - Page 7
Grounding Cable To tie the assembled rack to the facility's ground, use the grounding wire with the included M6 screw and toothed lock washer. Screw the grounding wire to the pre-installed rivet nut on the inside of the base bracket as shown below. 16 18 17 5 - CyberPower CR25U40001 | User Manual - Page 8
CyberPower Systems, Inc. www.cyberpower.com For USA and Canada: 4241 12th Ave East, Suite 400 Shakopee, MN 55379 Toll-free: (877) 297-6937 For all other regions: Please visit our website for local contact information. Copyright © 2016 CyberPower Systems, Inc. All rights reserved. K01-0000547-00
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Copyright © 2016 CyberPower Systems, Inc. All rights reserved.
USER’S MANUAL
4-Post Open Frame Rack
4-Post Open Frame Rack
SAVE THESE INSTRUCTIONS
Please read this manual and follow the instructions for installation and use.
K01-0000547-00