D-Link 7000AP Quick Installation Guide
D-Link 7000AP - Air Xpert - Wireless Access Point Manual
 |
UPC - 790069253942
View all D-Link 7000AP manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link 7000AP manual content summary:
- D-Link 7000AP | Quick Installation Guide - Page 1
Access Point Before You Begin The default IP address for the DWL-7000AP is 192.168.0.50 with a Subnet Mask of 255.255.255.0. You will need to assign your computer a Static IP address within the same range as the DWL-7000AP's IP address for the purpose of configuring the DWL7000AP. See the Manual - D-Link 7000AP | Quick Installation Guide - Page 2
PCI Adapter will connect, out of the box, with the DWL-7000AP, using their default settings. C. Antennas Used to wirelessly connect to 802.11a/b/g adapters. Reset Button Pressing this button restores the Router to its original factory default settings. B. LAN PORT is for connecting to a switch on - D-Link 7000AP | Quick Installation Guide - Page 3
Guide, your connected network should look similar to this: Using The Setup Wizard Open your Web browser and type "http://192.168.0.50" into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type "admin" for the username and leave the password - D-Link 7000AP | Quick Installation Guide - Page 4
Using The Setup Wizard (continued) Once you have logged in, the Home screen will appear. Click Run Wizard You will see the following screens. Click Next 4 - D-Link 7000AP | Quick Installation Guide - Page 5
the option to establish a password. Click Next Step 2 - Wireless Lan 802.11a Setup The default wireless settings are: SSID = default Channel = 36 You can change these settings to match an existing wireless network. Click Next Step 3 - WEP Encryption for 802.11a The DWL-7000AP is capable of 64 - D-Link 7000AP | Quick Installation Guide - Page 6
is Complete! Step 2 - Wireless Lan 802.11g Setup The default wireless settings are: SSID = default Channel = 6 You can change these settings to match an existing wireless network. Click Next Step 3 - WEP Encryption for 802.11g The DWL-7000AP is capable of 64, 128, and 152bit encryption. Select the - D-Link 7000AP | Quick Installation Guide - Page 7
to the Advanced, Tools, or Status tabs on the web-management interface; or to the manual located on the CD-ROM. • For managing several DWL-7000AP's, please utilize the D-Link AirXpert Access Point Manager. For the latest version of the firmware or AP manager please go to http://support.dlink.com 7 - D-Link 7000AP | Quick Installation Guide - Page 8
over the Telephone: (877) 453-5465 24 hours a day, seven days a week. D-Link Technical Support over the Internet: http://support.dlink.com email:[email protected] Tech Support for customers within Canada: D-Link Technical Support over the Telephone: (800) 361-5265 Monday to Friday 8:30am to 9:00pm
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
1
This product can be set up using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 6.2.3 or later.
5V 2.5A DC Power Adapter
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DWL-7000AP. 06192003
Before You Begin
Check Your Package Contents
DWL-7000AP Wireless Access Point
CD-ROM (containing Manual and Warranty)
Ethernet (CAT5 UTP/Straight-Through) Cable
If any of the above items are missing, please contact your reseller.
The default IP address for the DWL-7000AP is
192.168.0.50
with a Subnet Mask of
255.255.255.0
. You will need to assign your computer a Static IP address within the
same range as the DWL-7000AP’s IP address for the purpose of configuring the DWL-
7000AP.
See the Manual on the CD-ROM if you need assistance in assigning a
Static IP address for your network adapter.
Using a power supply
with a different voltage
rating will damage and void
the warranty of this product.
DWL-7000AP
D-Link
Air
Xpert
TM
Tri-mode Dualband Wireless
Access Point