D-Link DAP-1513 Product Manual - Page 21

Static IP, D-Link DAP-1513 User Manual, Configuration - internet connection

Get D-Link DAP-1513 PDF manuals and user guides
UPC - 790069352010
View all D-Link DAP-1513 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Section 3 - Configuration Static IP Select Static IP Address if all the Internet port's IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The MediaBridge® will not accept the IP address if it is not in this format. LAN Connection Type: Select Static IP from the drop-down menu. IP Address: Enter the IP address of the MediaBridge®. The default IP address is 192.168.0.50. If you change the IP address, once you click Apply, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask: Enter in the Subnet Mask. Default Gateway: Enter the Gateway. Device Name: Enter the Device Name of the DAP-1513. It is recommended to change the Device Name if there is more than one D-Link device within the subnet. You can enter the device name of the AP into your web browser to access the instead of IP address for configuration. If you are using the device name to connect, ensure that your PC and your DAP-1513 are on the same network. D-Link DAP-1513 User Manual 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
21
D-Link DAP-1513 User Manual
Section 3 - Configuration
LAN Connection Type:
IP Address:
Subnet Mask:
Default Gateway:
Device Name:
Select
Static IP
from the drop-down menu.
Enter the IP address of the MediaBridge®.
The default IP address is 192.168.0.50. If you
change the IP address, once you click
Apply
,
you will need to enter the new IP address in
your browser to get back into the configuration
utility.
Enter in the Subnet Mask.
Enter the Gateway.
Enter the Device Name of the DAP-1513. It is
recommended to change the Device Name if
there is more than one D-Link device within the
subnet.You can enter the device name of the AP
into your web browser to access the instead of
IP address for configuration. If you are using the
device name to connect, ensure that your PC
and your DAP-1513 are on the same network.
Static IP
Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP
address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields
must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The MediaBridge® will not accept the IP
address if it is not in this format.