D-Link DAP-2020 Manual 1
D-Link DAP-2020 Manual
 |
View all D-Link DAP-2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DAP-2020 manual content summary:
- D-Link DAP-2020 | Manual 1 - Page 1
Version 1.0 | 11/03/2016 User Manual Wireless N300 Access Point DAP-2020 - D-Link DAP-2020 | Manual 1 - Page 2
19 Wireless Installation Considerations 20 Configuration 21 Web-based Configuration Utility 21 Wireless Setup Wizard 22 Access Point Mode 23 Repeater Mode 25 Wireless Client Mode 27 Manual Configuration 29 Wireless Settings 29 D-Link DAP-2020 User Manual Access Point Mode 30 Repeater - D-Link DAP-2020 | Manual 1 - Page 3
72 Configure WPA-PSK 74 Using Windows® 7 75 Configure WPS 78 Troubleshooting 82 Wireless Basics 86 What is Wireless 87 Tips...89 Wireless Modes 90 Networking Basics 91 Check your IP address 91 Statically Assign an IP address 92 Technical Specifications 93 D-Link DAP-2020 User Manual 3 - D-Link DAP-2020 | Manual 1 - Page 4
Contents DAP-2020 Wireless N300 Access Point Ethernet Cable Two Detachable Antennas Power Adapter CD-ROM Note: Using a power supply with a different voltage rating than the one included with the DAP-2020 will cause damage and void the warranty for this product. D-Link DAP-2020 User Manual 4 - D-Link DAP-2020 | Manual 1 - Page 5
- Product Overview System Requirements Network Requirements Web-based Configuration Utility Requirements • An Ethernet-based Network • IEEE 802 ® Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. D-Link DAP-2020 User Manual 5 - D-Link DAP-2020 | Manual 1 - Page 6
be flexibly configured to operate in 7 different modes Access Point, Wireless Client, Bridge, Bridge with AP, Repeater, WISP Client Router or WISP Repeater. With its Setup Wizard, the DAP-2020 ensures that , and network overhead, lower actual data throughput rate. D-Link DAP-2020 User Manual 6 - D-Link DAP-2020 | Manual 1 - Page 7
The DAP-2020 is designed for use in bigger homes and for users who demand higher performance networking. TOTAL NETWORK SECURITY The DAP-2020 supports all of the latest wireless throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DAP-2020 User Manual 7 - D-Link DAP-2020 | Manual 1 - Page 8
its easy-to-use Web-based user interface, the DAP-2020 lets you control what information is accessible to those on the wireless network, whether from the Internet or from your company's server. Configure your access point to your specific settings within minutes. D-Link DAP-2020 User Manual 8 - D-Link DAP-2020 | Manual 1 - Page 9
the access point to its original factory default settings. 2 LAN Port Connect 10/100 Ethernet devices such as computers, switches, and hubs. 3 Power Button Push the Power Button to switch power on/off. 4 Power Receptor Receptor for the supplied power adapter. D-Link DAP-2020 User Manual 9 - D-Link DAP-2020 | Manual 1 - Page 10
a successful WPS connection. A blinking light indicates the device is trying to establish a connection. 4 LAN LED A solid green light indicates the LAN port connection is OK. D-Link DAP-2020 User Manual 10 - D-Link DAP-2020 | Manual 1 - Page 11
Section 1 - Product Overview Hardware Overview WPS LED/WPS Button 1 WPS Button 1 Push the WPS Button to use WPS function D-Link DAP-2020 User Manual 11 - D-Link DAP-2020 | Manual 1 - Page 12
you figure out which setting works with your setup. • Access Point mode - page 13 • Wireless Client mode - page 14 • Repeater mode - page 15 • Bridge mode - page 16 • Bridge with AP mode - page 17 • WISP Client Router mode - page 18 • WISP Repeater mode - page 19 D-Link DAP-2020 User Manual 12 - D-Link DAP-2020 | Manual 1 - Page 13
Section 2 - Installation Access Point Mode In the Access Point mode, the DAP-2020 acts as a central connection point for any computer (client) that has connect to the AP at the same time. Computer Internet Modem Router DAP-2020 (in Access Point Mode) Computer D-Link DAP-2020 User Manual 13 - D-Link DAP-2020 | Manual 1 - Page 14
switch. Example: Connect a gaming console using an ethernet cable to the DAP-2020. The unit is set to Wireless Client mode which will wirelessly connect to a wireless router on your network. Internet Modem Router DAP-2020 (in Wireless Client Mode) Gaming Console D-Link DAP-2020 User Manual 14 - D-Link DAP-2020 | Manual 1 - Page 15
Section 2 - Installation Repeater Mode In Repeater mode, the DAP-2020 increases the range of your wireless network by extending the network name), channel, and security settings. Internet Modem Router Computer Computer DAP-2020 (In Repeater Mode) Computer D-Link DAP-2020 User Manual 15 - D-Link DAP-2020 | Manual 1 - Page 16
as APs. Note: The Bridge mode is not specified in the Wi-Fi or IEEE standards. This mode will only work using two DAP-2020 units. Communication with other APs (even other D-Link APs) is not guaranteed. Connecting Two Separate LANs Together Through Two DAP-2020 Units D-Link DAP-2020 User Manual 16 - D-Link DAP-2020 | Manual 1 - Page 17
) is not guaranteed. LAN 1 LAN 2 Computer Computer Computer Computer DAP-2020 (In Bridge Mode with AP Mode) DAP-2020 (In Bridge Mode with AP Mode) Connecting Two Separate LANs Together Through Two DAP-2020 Units (Wireless PCs Can Access the DAP-2020 Units) D-Link DAP-2020 User Manual 17 - D-Link DAP-2020 | Manual 1 - Page 18
WISP Client Router mode, the DAP-2020 wirelessly connects to a WISP (Wireless Internet Service Provider) AP. In this mode, the DAP-2020 also acts as a router for wired clients on your LAN and provides NAT (Network Address Translation) and a DHCP server to generate IP addresses for wired clients only - D-Link DAP-2020 | Manual 1 - Page 19
connects to a WISP (Wireless Internet Service Provider) AP. In this mode, the DAP-2020 also acts as a router for both wireless and wired clients on your LAN. The WISP Repeater mode provides NAT (Network Address Translation) and a DHCP server to generate IP addresses for both wireless and wired - D-Link DAP-2020 | Manual 1 - Page 20
wireless range is to follow these basic guidelines: 1. Keep the number of walls and ceilings between the D-Link access point and other network devices to a minimum. Each wall or ceiling can reduce your adapter's transmits a signal even if the phone is not in use. D-Link DAP-2020 User Manual 20 - D-Link DAP-2020 | Manual 1 - Page 21
browser such as Internet Explorer and enter http://dlinkap in the address field. Select Admin and then enter your password. Leave the password blank by default. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance. D-Link DAP-2020 User Manual 21 - D-Link DAP-2020 | Manual 1 - Page 22
Section 3 - Configuration Wireless Setup Wizard Click Launch Wireless Setup Wizard to configure your access point. DAP-2020 If you want to enter your settings without running the wizard, skip to page 34. DAP-2020 Click Next to continue. D-Link DAP-2020 User Manual 22 - D-Link DAP-2020 | Manual 1 - Page 23
2020 as an access point. Select Access Point from the drop-down menu. Then, click Next to continue. Enter a name for your wireless network (SSID). Enter your Wi-Fi Password. This Password must be entered on your wireless clients. Click Next to continue. D-Link_DAP-2020 D-Link DAP-2020 User Manual - D-Link DAP-2020 | Manual 1 - Page 24
Section 3 - Configuration The following screen will show you your network key to enter on your wireless clients. Click Save to finish the Setup Wizard. D-Link_DAP-2020 D-Link DAP-2020 User Manual 24 - D-Link DAP-2020 | Manual 1 - Page 25
Section 3 - Configuration Repeater Mode This Wizard is designed to assist you in configuring your DAP-2020 as a repeater. Select Repeater from the drop-down menu. Select Manual configuration to setup your network manually. Click Next to continue. D-Link DAP-2020 User Manual 25 - D-Link DAP-2020 | Manual 1 - Page 26
- Configuration Find your router or access point from the list, click the radio button in the right column, and click Connect. Enter the Wi-Fi password. Click Next to complete the Setup Wizard. The Wireless Setup Wizard is complete. Click Save to reboot the device. D-Link DAP-2020 User Manual 26 - D-Link DAP-2020 | Manual 1 - Page 27
Section 3 - Configuration Wireless Client Mode This Wizard is designed to assist you in configuring your DAP-2020 as a wireless client. Select Wireless Client from the drop-down menu. Select Manual configuration to setup your network manually. Click Next to continue. D-Link DAP-2020 User Manual 27 - D-Link DAP-2020 | Manual 1 - Page 28
Section 3 - Configuration Find your access point from the list, click the radio button in the right column, and click Connect. Enter the Wi-Fi password. Click Next to complete the Setup Wizard. The Wi-Fi Setup Wizard is complete. Click Save to reboot the device. D-Link DAP-2020 User Manual 28 - D-Link DAP-2020 | Manual 1 - Page 29
manually configure your DAP-2020 instead of running the setup wizard. • Access Point mode - page 30 • Repeater mode - page 32 • Wireless Client mode - page 33 • Bridge mode - page 34 • Bridge with AP mode - page 35 • WISP Client Router mode - page 36 • WISP Repeater mode - page 36 D-Link DAP-2020 - D-Link DAP-2020 | Manual 1 - Page 30
- Configuration Access the SSID. For security purposes, it is highly recommended to change from the default network name. 802.11 Mode: Select one of the following: 802.11n Only DAP-2020 to choose the channel with the least amount of interference. Channel Scan: D-Link DAP-2020 User Manual 30 - D-Link DAP-2020 | Manual 1 - Page 31
DAP-2020. If checked, the SSID of the DAP-2020 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DAP-2020 in order to connect to it. Security Mode: Refer to page 65 for more information regarding the wireless security. D-Link DAP-2020 User Manual - D-Link DAP-2020 | Manual 1 - Page 32
pre-configured with the SSID of the DAP-2020 in order to connect to it. Wireless Security Select a wireless security setting. Options are None, WEP, WPA, or WPA2. See the Wireless Security section in this manual for a detailed Mode: explanation of the wireless security options. D-Link DAP-2020 User - D-Link DAP-2020 | Manual 1 - Page 33
wireless security setting. Options are None, WEP, WPA, or WPA2. See the Wireless Security section in this manual for a detailed Mode: explanation of the wireless security options. WPS: Select enable if you want to configure the DAP-2020 with Wi-Fi Protection setup. D-Link DAP-2020 User Manual 33 - D-Link DAP-2020 | Manual 1 - Page 34
use the Auto setting for optimal performance. Remote AP MAC: Enter the MAC addresses of the APs in your network that will serve as bridges to wirelessly mode can work with other DAP-2020 units. Communication with other APs (even other D-Link APs) is not guaranteed. D-Link DAP-2020 User Manual 34 - D-Link DAP-2020 | Manual 1 - Page 35
clients will have to be pre-configured with the SSID of the DAP-2020 in order to connect to it. Remote AP MAC: Enter the MAC addresses of the APs in your can work with other DAP-2020 units. Communication with other APs (even other D-Link APs) is not guaranteed. D-Link DAP-2020 User Manual 35 - D-Link DAP-2020 | Manual 1 - Page 36
-configured with the SSID of the DAP-2020 in order to connect to it. Wireless Security Select a wireless security setting. Options are None, WEP, WPA, or WPA2. Refer to the Wireless Security section of this manual for Mode: a detailed explanation of the wireless security options. D-Link DAP-2020 - D-Link DAP-2020 | Manual 1 - Page 37
address your DAP-2020. You can click the Clone Your PC's MAC Address button to replace the AP's MAC address with the MAC address of the PC that you used to register with your ISP. It is not recommended that you change the default MAC address unless required by your ISP. D-Link DAP-2020 User Manual - D-Link DAP-2020 | Manual 1 - Page 38
to the MAC address on the AP (Access Point). You can click the Clone Your PC's MAC Address button to replace the AP's MAC address with the MAC address of your Ethernet card. It is not recommended that you change the default MAC address unless required by your ISP. D-Link DAP-2020 User Manual 38 - D-Link DAP-2020 | Manual 1 - Page 39
to the MAC address on the AP (Access Point). You can click the Clone Your PC's MAC Address button to replace the AP's MAC address with the MAC address of your Ethernet card. It is not recommended that you change the default MAC address unless required by your ISP. D-Link DAP-2020 User Manual 39 - D-Link DAP-2020 | Manual 1 - Page 40
on the AP (Access Point). You can click the Clone Your PC's MAC Address button to replace the AP's MAC address with the MAC address of your Ethernet card. It is not recommended that you change Clone MAC Address: the default MAC address unless required by your ISP. D-Link DAP-2020 User Manual 40 - D-Link DAP-2020 | Manual 1 - Page 41
the subnet. LAN Connection Use the drop-down menu to select Dynamic IP Type: (DHCP) to automatically obtain an IP address on the LAN/private network. My IPv6 Select from the drop-down menu the type of IPv6 Connection Type: connection you would like to use. DAP-2020 D-Link DAP-2020 User Manual 41 - D-Link DAP-2020 | Manual 1 - Page 42
you change the IP address, once you click Apply, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask: Enter the Subnet Mask assigned by your ISP. Default Gateway: Enter the Gateway assigned by your ISP. D-Link DAP-2020 User Manual 42 - D-Link DAP-2020 | Manual 1 - Page 43
the IP address of the gateway on the network. WINS : Enter the IP address of the WINS on the network. DNS : Enter the IP address of the DNS on the network. DHCP Lease Time : The lease time is the period of time before the DHCP server will assign new IP addresses. D-Link DAP-2020 User Manual 43 - D-Link DAP-2020 | Manual 1 - Page 44
Configuration Advanced Advanced Wireless Transmit Power: Sets the transmit power of the antennas. WMM Enable: WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients. DAP-2020 . Coexistance: D-Link DAP-2020 User Manual 44 - D-Link DAP-2020 | Manual 1 - Page 45
MAC Address List is refused access to the network. DAP-2020 Add MAC This parameter allows you to manually add a MAC filtering Filtering rule. Click the Add button to add the new MAC filtering rule Rule: to the MAC Filtering Rules list at the bottom of this screen. D-Link DAP-2020 User Manual 45 - D-Link DAP-2020 | Manual 1 - Page 46
access point. Default: Generate New Create a random number that is a valid PIN. This PIN: becomes the router's PIN. You can then copy this PIN to the user interface of the registrar. Add Wireless Press the button to start with the wizard to setup Station: the WPS. D-Link DAP-2020 User Manual 46 - D-Link DAP-2020 | Manual 1 - Page 47
Section 3 - Configuration User Limits Enter the maximum number of wireless clients that can connect at one time to your access point. the maximum number of clients, between 1 and 32. Save Click Save Settings to save and activate the new Settings: changes. DAP-2020 D-Link DAP-2020 User Manual 47 - D-Link DAP-2020 | Manual 1 - Page 48
IP address of the computer on your local network that you want to allow the incoming service to. Start/End Ports: Enter the port or ports that you want to open. If you want to open one port, enter the same port in both boxes. Traffic Type: Select TCP, UDP, or Both. D-Link DAP-2020 User Manual - D-Link DAP-2020 | Manual 1 - Page 49
Settings and the port filter rule will be put into the Port Filter List. Port Filter Check the box to configure a port filter rule. Rules: Name: Enter a name for the rule. You can select an application name port in both boxes. Traffic Type: Select TCP, UDP, or Both. D-Link DAP-2020 User Manual 49 - D-Link DAP-2020 | Manual 1 - Page 50
: Check this box to enable DMZ. DMZ Host IP Enter the IP address of the computer you would Address: like to open all ports to. You can select a computer from the Computer Name drop-down menu and click - D-Link DAP-2020 | Manual 1 - Page 51
the DAP-2020 is in the WISP Client Router or WISP Repeater mode. This feature allows you to create a list of websites that you want to deny users access. Configure you want to block Address: and click Save Settings. Any URL that contains the keyword will be blocked. D-Link DAP-2020 User Manual 51 - D-Link DAP-2020 | Manual 1 - Page 52
Configuration Advanced Network (WISP modes only) This function is available if the DAP-2020 is in WISP Client Router or WISP Repeater mode. This feature allows you to change the LAN settings. Please be aware that any changes to the factory default (Internet) host. D-Link DAP-2020 User Manual 52 - D-Link DAP-2020 | Manual 1 - Page 53
Section 3 - Configuration Maintenance Admin This page will allow you to change the Administrator password. The entered in the Password: previous textbox in order to confirm its accuracy. DAP-2020 Enable Check to enable this feature. Graphical Authentication: D-Link DAP-2020 User Manual 53 - D-Link DAP-2020 | Manual 1 - Page 54
created. If you want to save the current access point configuration settings, use the Save button above. Note: Restoring the factory default settings will not reset the Wi-Fi Protected Status to Not Configured. Reboot the Click to reboot the access point. Device: D-Link DAP-2020 User Manual 54 - D-Link DAP-2020 | Manual 1 - Page 55
for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from this site. Browse: After you have downloaded the new firmware, click Browse to locate the firmware update on your hard drive. Click Upload to complete the firmware upgrade. DAP-2020 Upload - D-Link DAP-2020 | Manual 1 - Page 56
Configuration Watchdog The Watchdog feature pings a specified IP address. If the IP address stops responding to pings, your AP will be rebooted. You can also select an option to have the DAP-2020 send an e-mail alert if the specified IP address it in the next box. D-Link DAP-2020 User Manual 56 - D-Link DAP-2020 | Manual 1 - Page 57
the dropdown menu. Date and Time: To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Save Settings. You can also click the Copy Computer Time button at the bottom of the screen. DAP-2020 D-Link DAP-2020 User Manual 57 - D-Link DAP-2020 | Manual 1 - Page 58
. Ping Test : The Ping Test / IPv6 Ping Test is used to send Ping. Ping Result: The results of your ping attempts will be displayed here. DAP-2020 D-Link DAP-2020 User Manual 58 - D-Link DAP-2020 | Manual 1 - Page 59
, a range of days, or All Week to include every day. DAP-2020 Time: Enter a start and end time for your schedule. Schedule Rules The list of schedules will be listed here. Click the List: Edit icon to make changes or click the Delete icon to remove the schedule. D-Link DAP-2020 User Manual 59 - D-Link DAP-2020 | Manual 1 - Page 60
. General: Displays the access point's time and firmware version. LAN: Displays the MAC address and the private (local) IP DAP-2020 settings for the access point. Wireless LAN: Displays the wireless MAC address and your wireless settings such as SSID and Channel. D-Link DAP-2020 User Manual 60 - D-Link DAP-2020 | Manual 1 - Page 61
Section 3 - Configuration Logs The DAP-2020 keeps a running log of events and activities occurring on the AP. If the current log content. Log Settings: This button opens a new menu where you can configure the log settings. Refresh: This button refreshes the log. D-Link DAP-2020 User Manual 61 - D-Link DAP-2020 | Manual 1 - Page 62
- Configuration Statistics The DAP-2020 keeps statistics of the traffic that passes through it. You can view the amount of packets that pass through the LAN and wireless portions of the network. The traffic counter will reset if the access point is rebooted. DAP-2020 D-Link DAP-2020 User Manual 62 - D-Link DAP-2020 | Manual 1 - Page 63
are connected to your wireless access point. Connection Time: Displays the amount of time the wireless client has been connected to the access point. MAC Address: The Ethernet ID (MAC address) of the wireless client. DAP-2020 D-Link DAP-2020 User Manual 63 - D-Link DAP-2020 | Manual 1 - Page 64
Section 3 - Configuration DAP-2020 Help D-Link DAP-2020 User Manual 64 - D-Link DAP-2020 | Manual 1 - Page 65
you the different levels of security you can use to protect your data from intruders. The DAP-2020 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) • WPA (Wi-Fi Protected Access) • WPA2-PSK (Pre-Shared Key) • WPA-PSK (Pre-Shared Key) D-Link DAP-2020 User Manual 65 - D-Link DAP-2020 | Manual 1 - Page 66
protocol (EAP). WEP regulates access to a wireless network based on a computer's hardware-specific MAC address, which is relatively simple to be sniffed out and stolen. EAP is built on a more system to ensure that only authorized network users can access the network. D-Link DAP-2020 User Manual 66 - D-Link DAP-2020 | Manual 1 - Page 67
. 6. Click Save Settings at the top of the window to save your settings. If you are configuring the access point with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the access point. D-Link DAP-2020 User Manual 67 - D-Link DAP-2020 | Manual 1 - Page 68
. 5. Next to RADIUS Server, enter the IP Address of your RADIUS server. 6. Next to Port, enter the port you are using with your RADIUS server. 1812 is the default port. 7. Next to Shared Secret, enter the security key. 8. Click Save Settings to save your settings. D-Link DAP-2020 User Manual 68 - D-Link DAP-2020 | Manual 1 - Page 69
. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal, but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DAP-2020 User Manual 69 - D-Link DAP-2020 | Manual 1 - Page 70
to enable WEP on your wireless bridge or access point before configuring your wireless adapter. If you are joining an existing network, Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DAP-2020 User Manual 70 - D-Link DAP-2020 | Manual 1 - Page 71
fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless access point. D-Link DAP-2020 User Manual 71 - D-Link DAP-2020 | Manual 1 - Page 72
Windows Vista® Windows Vista® users may use the convenient, built-in wireless utility. Follow these instructions: From the Start menu, go to Control Panel, and then click on Network and Sharing under Select a network to connect to and then click the Connect button. D-Link DAP-2020 User Manual 72 - D-Link DAP-2020 | Manual 1 - Page 73
window indicates the establishment of a successful connection. The next two pages display the windows used to connect to either a WEP or a WPA-PSK wireless network. D-Link DAP-2020 User Manual 73 - D-Link DAP-2020 | Manual 1 - Page 74
WPA-PSK It is recommended to enable WEP on your wireless bridge or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know security key or passphrase in the field provided and then click the Connect button. D-Link DAP-2020 User Manual 74 - D-Link DAP-2020 | Manual 1 - Page 75
recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know display any available wireless networks in your area. Wireless Icon D-Link DAP-2020 User Manual 75 - D-Link DAP-2020 | Manual 1 - Page 76
get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DAP-2020 User Manual 76 - D-Link DAP-2020 | Manual 1 - Page 77
the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DAP-2020 User Manual 77 - D-Link DAP-2020 | Manual 1 - Page 78
Configure WPS The WPS feature of the DAP-2020 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature of the DAP-2020: 1. Click the Start button and select Computer from the Start menu. 2. Click the Network option. D-Link DAP-2020 User Manual - D-Link DAP-2020 | Manual 1 - Page 79
Section 5 - Connecting to a Wireless Network 3. Double-click the DAP-2020. 4. Input the WPS PIN number (displayed in the WPS window on the Router's LCD screen or in the Setup > Wireless Setup menu in the Router's Web UI) and click Next. D-Link DAP-2020 User Manual 79 - D-Link DAP-2020 | Manual 1 - Page 80
Section 5 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DAP-2020 User Manual 80 - D-Link DAP-2020 | Manual 1 - Page 81
The following window informs you that WPS on the DAP-2020 has been setup successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DAP-2020 User Manual 81 - D-Link DAP-2020 | Manual 1 - Page 82
. Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DAP-2020 User Manual 82 - D-Link DAP-2020 | Manual 1 - Page 83
10 seconds. Release the button and the access point will go through its reboot process. Wait about 30 seconds to access the access point. The default IP address is 192.168.0.50. When logging in, the username is Admin and leave the password box empty. D-Link DAP-2020 User Manual 83 - D-Link DAP-2020 | Manual 1 - Page 84
Section 6 - Troubleshooting 3. Why can't I connect to certain sites or send and receive emails when connecting through my access point? If you are having a problem sending or receiving email, : ping [url] [-f ] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DAP-2020 User Manual 84 - D-Link DAP-2020 | Manual 1 - Page 85
• Click on Setup and then click Manual Configure. • To change the MTU enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DAP-2020 User Manual 85 - D-Link DAP-2020 | Manual 1 - Page 86
Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Access point is a device used to provide this link. D-Link DAP-2020 User Manual 86 - D-Link DAP-2020 | Manual 1 - Page 87
winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. campuses, airports, golf courses, and many other outdoor venues. D-Link DAP-2020 User Manual 87 - D-Link DAP-2020 | Manual 1 - Page 88
popular in recent years that almost everyone is using it, whether it's for home, office, business, D-Link has a wireless solution for it. Home • Gives everyone at home broadband access • Surf the web, printer with multiple computers • No need to dedicate office space D-Link DAP-2020 User Manual 88 - D-Link DAP-2020 | Manual 1 - Page 89
it could be quite a task not knowing where to start. That's why we've put together a few setup steps and tips to help you through the process of setting up a wireless network. Tips Here are a few that the appliances might cause since they operate on same frequency. D-Link DAP-2020 User Manual 89 - D-Link DAP-2020 | Manual 1 - Page 90
wireless network by turning on the WPA or WEP security feature on the access point. Refer to product manual for detail information on how to set it up. Wireless Modes There are basically two modes of adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DAP-2020 User Manual 90 - D-Link DAP-2020 | Manual 1 - Page 91
the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DAP-2020 User Manual 91 - D-Link DAP-2020 | Manual 1 - Page 92
Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DAP-2020 User - D-Link DAP-2020 | Manual 1 - Page 93
materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. 2Range varies depending on country's regulation. D-Link DAP-2020 User Manual 93 - D-Link DAP-2020 | Manual 1 - Page 94
1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright ©2010-2011 by D-Link Corporation/D-Link Systems, Inc. not installed and used in accordance with the instructions, may cause harmful interference to radio communications. . D-Link DAP-2020 User Manual 94
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
 |
 |
Wireless N300 Access Point
DAP-2020
User Manual
Version 1.0 | 11/03/2016