D-Link DAP-2360 User Manual

D-Link DAP-2360 Manual

Get D-Link DAP-2360 PDF manuals and user guides View all D-Link DAP-2360 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DAP-2360 manual content summary:

  • D-Link DAP-2360 | User Manual - Page 1
  • D-Link DAP-2360 | User Manual - Page 2
    17 Wireless 17 Access Point mode 17 WDS with AP mode 19 WDS mode 21 Wireless Client mode 23 Open System/Shared Key Authentication ... 24 WPA/WPA2-Personal Authentication........... 25 WPA/WPA2-Enterprise Authentication......... 26 802.1x Authentication 27 D-Link DAP-2360 User Manual LAN
  • D-Link DAP-2360 | User Manual - Page 3
    Upload 66 Time and Date 67 System 68 System Settings 68 Help 69 Troubleshooting 70 Networking Basics 72 Check your IP address 72 Statically Assign an IP address 73 Technical Specifications 75 Contacting Technical Support 77 Warranty 78 Registration 84 D-Link DAP-2360 User Manual 3
  • D-Link DAP-2360 | User Manual - Page 4
    Product Overview PPraocdkuacgteOCvoenrtevnietsw • D-Link DAP-2360 AirPremier® N PoE Access Point • Power Adapter • CAT5 Ethernet Cable • CD-ROM with User Manual • Install Guide Note: Using a power supply with a different voltage rating than the one included with the DAP-2360 will cause damage and
  • D-Link DAP-2360 | User Manual - Page 5
    wireless networking modes: access point, WDS (Wireless Distribution System) with AP, WDS, or Wireless Client mode. Use less wiring, enjoy increased flexibility, save time and money with PoE (Power over Ethernet). With PoE, the DAP-2360 shares power and data over the CAT5 cable, making the setup
  • D-Link DAP-2360 | User Manual - Page 6
    Remote Authentication Dial-in User Service) server, a network administrator can define a list of authorized users who can access the wireless LAN. When attempting to access a wireless LAN with WPA-Enterprise configured, the new client will be requested to enter a username with a password. If the new
  • D-Link DAP-2360 | User Manual - Page 7
    management. Superior wireless AP manager software is bundled with the DAP-2360 for network configuration and firmware upgrade. Systems administrators can also set up the DAP-2360 easily with the Web-based configuration. A D-Link D-View 6.0 module will be downloadable for network administration
  • D-Link DAP-2360 | User Manual - Page 8
    modes. Scalability - Configurations can be easily changed and range from Peer-to-Peer networks, suitable for a small number of users to larger Infrastructure networks to accommodate hundreds or thousands of users, depending on the number of wireless devices deployed. D-Link DAP-2360 User Manual 8
  • D-Link DAP-2360 | User Manual - Page 9
    from IEEE Standard 802.11n and 802.11g specifications. Actual data throughput may vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead can lower actual data throughout rate. D-Link DAP-2360 User Manual 9
  • D-Link DAP-2360 | User Manual - Page 10
    Section 2 - Installation Wireless Installation Considerations The D-Link AirPremier® N wireless access point lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and
  • D-Link DAP-2360 | User Manual - Page 11
    socket is used to reset the system or restore the factory default settings. Note: After resetting the unit, you will still be able to access the data on your hard drives. LAN (PoE) Port An Ethernet port will be flickering green when there is active LAN traffic. D-Link DAP-2360 User Manual 11
  • D-Link DAP-2360 | User Manual - Page 12
    one end of an Ethernet cable (included with your access point) to the LAN port on the DAP-2360 and the other end of the Ethernet cable to either your computer or to your PoE switch. The AP can be powered on by a PoE switch or by the power adapter shipped with the AP. D-Link DAP-2360 User Manual 12
  • D-Link DAP-2360 | User Manual - Page 13
    Modes Access Point (AP) WDS with AP WDS Wireless Client Create a wireless LAN Wirelessly connect multiple networks while still functioning as a wireless AP Wirelessly connect multiple networks AP acts as a wireless network adapter for your Ethernetenabled device D-Link DAP-2360 User Manual 13
  • D-Link DAP-2360 | User Manual - Page 14
    Install Guide included with your router. 4. If you are connecting a desktop computer to your network, install a wireless PCI adapter into an available PCI slot on your desktop computer. 5. Install the drivers for your wireless CardBus adapter into a laptop computer. D-Link DAP-2360 User Manual 14
  • D-Link DAP-2360 | User Manual - Page 15
    IP address assigned to the DAP-2360, make sure to enter the correct IP address. Enter the user name (admin) and your password. Leave the password field blank by default and click Login. Note: If you have changed the password, make sure to enter the correct password. D-Link DAP-2360 User Manual
  • D-Link DAP-2360 | User Manual - Page 16
    screen to save (not activate) your configuration changes. button at the bottom of You may change settings to multiple pages before activating. Once you are finished, click the Configuration button located at the top of the page and then click Save and Activate. D-Link DAP-2360 User Manual 16
  • D-Link DAP-2360 | User Manual - Page 17
    . Mode: Select Access Point from the drop-down menu. The other three choices are WDS with AP, WDS, and Wireless Client. Network Name Service Set Identifier (SSID) is the name (SSID): designated for a specific wireless local area network (WLAN). The SSID's factory default setting is dlink. The SSID
  • D-Link DAP-2360 | User Manual - Page 18
    . Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. Select WPA-Enterprise to secure your network with the inclusion of a RADIUS server. Select 802.1x to secure your network using 802.1x authentication. D-Link DAP-2360 User Manual 18
  • D-Link DAP-2360 | User Manual - Page 19
    from the drop-down menu. Mode: WDS with AP mode is selected from the drop-down menu. Network Name Service Set Identifier (SSID) is the name designated (SSID): for a specific wireless local area network (WLAN). The SSID's factory default setting is dlink. The SSID can be easily changed to connect to
  • D-Link DAP-2360 | User Manual - Page 20
    devices that share the same WEP settings. If multi-SSID is enabled, this option is not available. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-2360 User Manual 20
  • D-Link DAP-2360 | User Manual - Page 21
    desired selection. Channel Use the drop-down menu to choose 20 MHz or Width: Auto 20/40 MHz. Remote Enter the MAC addresses of the APs on your AP MAC network that will serve as bridges to wirelessly Address: connect multiple networks. D-Link DAP-2360 User Manual 21
  • D-Link DAP-2360 | User Manual - Page 22
    Section 3 - Configuration Site Survey: Click on the Scan button to search for available wireless networks, then click on the available network that you Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-2360 User Manual 22
  • D-Link DAP-2360 | User Manual - Page 23
    clone MAC. This feature will allow you to change the MAC address of the access point to the MAC address of a client. MAC Source: Select the MAC source from the drop-down menu. MAC Address: Enter the MAC address that you would like to assign to the access point. D-Link DAP-2360 User Manual 23
  • D-Link DAP-2360 | User Manual - Page 24
    Section 3 - Configuration Open System/Shared Key Authentication Encryption: Use the radio button to disable or enable letters A-F. *ASCII (American Standard Code for Information Interchange) is a code that represents English letters using numbers ranging from 0-127. D-Link DAP-2360 User Manual 24
  • D-Link DAP-2360 | User Manual - Page 25
    Periodical Key Change to have Key Change: the access point automatically change your PassPhrase. Enter the Activate From time and the time in hours to change the key. PassPhrase: When you select WPA-Personal, please enter a PassPhrase in the corresponding field. D-Link DAP-2360 User Manual 25
  • D-Link DAP-2360 | User Manual - Page 26
    Configuration the interval during which the group key Update will be valid. The recommended value Access Access Protection. Protection: RADIUS Enter the IP address of the RADIUS server. Server: RADIUS Port: Enter the RADIUS port. RADIUS Enter the RADIUS secret. Secret: D-Link DAP-2360 User Manual
  • D-Link DAP-2360 | User Manual - Page 27
    interval during which the group key will be valid (300 is the recommended value). A lower interval may reduce data transfer rates. RADIUS Server: Enter the IP address of the RADIUS server. RADIUS Port: Enter the RADIUS port. RADIUS Secret: Enter the RADIUS secret. D-Link DAP-2360 User Manual 27
  • D-Link DAP-2360 | User Manual - Page 28
    . Subnet Enter the subnet mask. All devices in the network Mask: must share the same subnet mask. Default Enter the IP address of the gateway in your network. Gateway: If there is a gateway in your network, please enter an IP address within the range of your network. D-Link DAP-2360 User Manual 28
  • D-Link DAP-2360 | User Manual - Page 29
    from IEEE Standard 802.11n and 802.11g specifications. Actual data throughput may vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead can lower actual data throughout rate. D-Link DAP-2360 User Manual 29
  • D-Link DAP-2360 | User Manual - Page 30
    the user to share the wireless network traffic and the client using multiple APs. If this function is enabled, when the number of users exceeds this value, the DAP-2360 will not allow clients to associate with the AP. User Limit (0-64): Set the maximum amount of users that are allowed access (0-64
  • D-Link DAP-2360 | User Manual - Page 31
    Configuration Multi-SSID The device supports up to four multiple Service Set Identifiers. In the Basic > Wireless section, you can set the Primary SSID. The SSID's factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless . D-Link DAP-2360 User Manual 31
  • D-Link DAP-2360 | User Manual - Page 32
    item in the corresponding field. RADIUS Server: When you select WPA-Enterprise, enter the IP address of the RADIUS server. In addition, you must configure RADIUS Port and RADIUS Secret. RADIUS Port: Enter the RADIUS port. RADIUS Secret: Enter the RADIUS secret. D-Link DAP-2360 User Manual 32
  • D-Link DAP-2360 | User Manual - Page 33
    DAP-2360 without a VLAN tag will have a VLAN tag inserted with a PVID. The VLAN List tab displays the current VLANs. VLAN Status: Use the radio button to toggle between Enable or Disable. Next, go to the Add/Edit VLAN tab to add or modify an item on the VLAN List tab. D-Link DAP-2360 User Manual
  • D-Link DAP-2360 | User Manual - Page 34
    modify an item on the VLAN List tab. Port Name: The name of the port is displayed in this column. Tag VID: The Tagged VID is displayed in this column. Untag VID: The Untagged VID is displayed in this column. PVID: The Port VLAN Identifier is displayed in this column. D-Link DAP-2360 User Manual 34
  • D-Link DAP-2360 | User Manual - Page 35
    configure VLANs. Once you have made the desired changes, click the Save button to let your changes take effect. VLAN Status: Use the radio button to toggle to Enable. VLAN ID: Provide a number between 1 and 4094 for the Internal VLAN. VLAN Name: Enter the VLAN to add or modify. D-Link DAP-2360 User
  • D-Link DAP-2360 | User Manual - Page 36
    as to configure various types of PVID settings. Click the Save button to let your changes take effect. VLAN Status: Use the radio button to toggle between Enable and Disable. PVID Auto Assign Use the radio button to toggle PVID auto Status: assign status to Enable. D-Link DAP-2360 User Manual 36
  • D-Link DAP-2360 | User Manual - Page 37
    Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click the Save button to let your changes take effect. AP List: The choices include All, Valid, Neighbor, Rogue, and New. Detect: Click this button to initiate a scan of the network. D-Link DAP-2360 User Manual 37
  • D-Link DAP-2360 | User Manual - Page 38
    . SSID: Enter the name of your wireless network (SSID). Day(s): Toggle the radio button between All Week and Select Day(s). If the second option is selected, check the specific days you want the rule to be Save: Click the Save button to save your created rules. D-Link DAP-2360 User Manual 38
  • D-Link DAP-2360 | User Manual - Page 39
    specific message flow, the rule with the highest priority will be used. QoS (Quality of Enable this option if you want to allow QoS to Service): prioritize your traffic Priority Classifiers. HTTP: Allows the access point or VoIP, running at a normal priority. D-Link DAP-2360 User Manual 39
  • D-Link DAP-2360 | User Manual - Page 40
    Section 3 - Configuration Name: Enter a name for the new QoS IP address falls within the range set here. Host 2 Port The rule applies to a flow of messages for which host 2's port number is within the range set here when the Protocol is set Range: to TCP, UDP, or Both. D-Link DAP-2360 User Manual
  • D-Link DAP-2360 | User Manual - Page 41
    current AP array status for the following parameters: Array Name, Master IP, MAC, Master, Backup Master, Slave, and Total. Current Array This table displays all the current array members. The Members: DAP-2360 AP array feature supports up to eight AP array members. D-Link DAP-2360 User Manual 41
  • D-Link DAP-2360 | User Manual - Page 42
    Section 3 - Configuration Wireless Basic Settings Network Name Select this option to use a Link Integrity: Select this option to use Link Integrity. Connection Limit: Select this option to use a Connection Limit. Wireless ACL: Select this option to use Wireless ACL. D-Link DAP-2360 User Manual
  • D-Link DAP-2360 | User Manual - Page 43
    Settings SNMP Settings: Select this option to enable SNMP Settings. System Name Settings: Select this option to use a System Name. Login Settings: Select this option to use Login Settings. Console Settings: Select this option to enable Console Settings. D-Link DAP-2360 User Manual 43
  • D-Link DAP-2360 | User Manual - Page 44
    users to add IP/MAC address mapping to prevent ARP spoofing attack. ARP Spoofing Prevention: This check box allows you to enable the ARP spoofing prevention function. Gateway IP Address: Enter a gateway IP address. Gateway MAC Address: Enter a gateway MAC address. D-Link DAP-2360 User Manual
  • D-Link DAP-2360 | User Manual - Page 45
    : Enter the IP address of the gateway on the network. WINS: Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that determines the IP address of a network computer that has a dynamically assigned IP address. D-Link DAP-2360 User Manual 45
  • D-Link DAP-2360 | User Manual - Page 46
    www.dlink.com into IP addresses. Domain Name: Enter the domain name of the network, if applicable. (An example of a domain name is: www.dlink.com.) Lease Time The lease time is the period of time before the DHCP server will assign new IP addresses. (60-31536000 sec): D-Link DAP-2360 User Manual 46
  • D-Link DAP-2360 | User Manual - Page 47
    Host Configuration Protocol (DHCP) assigns IP addresses to wireless devices on the network. This protocol simplifies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign IP addresses. Select Enable to allow the DAP-2360 to
  • D-Link DAP-2360 | User Manual - Page 48
    a dynamically assigned IP address, if applicable. DNS: Enter the Domain Name System (DNS) server address for the wireless network. The DNS server translates domain names such as www.dlink.com into IP addresses. Domain Name: Specify the domain name for the network. D-Link DAP-2360 User Manual 48
  • D-Link DAP-2360 | User Manual - Page 49
    that is assigned an IP address from the DHCP dynamic pool. Binding MAC The MAC address of a device on the network that is within the DHCP static IP address pool. Address: Assigned IP The current corresponding DHCP-assigned static IP address of the device. Address: D-Link DAP-2360 User Manual 49
  • D-Link DAP-2360 | User Manual - Page 50
    an ACL list and upload it to the access point instead of manually entering the information. Once created, click the Browse button and locate your file. Select it and then click Upload. Download ACL Click Download to export the ACL to a file File: on your computer. D-Link DAP-2360 User Manual 50
  • D-Link DAP-2360 | User Manual - Page 51
    blocked. Wireless devices can still send data to the Ethernet. Internal Station Connection: The default value is Enable, which allows stations to inter-communicate by connecting to a target AP. When disabled, wireless stations cannot exchange data through the AP. D-Link DAP-2360 User Manual 51
  • D-Link DAP-2360 | User Manual - Page 52
    Section 3 - Configuration Status Device Information Device This read-only window displays the configuration Information: settings of the DAP-2360, including the firmware version and the device's MAC address. D-Link DAP-2360 User Manual 52
  • D-Link DAP-2360 | User Manual - Page 53
    address of the client. Band: Displays the wireless band that the client is connected to. Authentication: Displays the type of authentication being used. Signal: Displays the client's signal strength. Power Saving Displays the status of the power saving Mode: feature. D-Link DAP-2360 User Manual 53
  • D-Link DAP-2360 | User Manual - Page 54
    the DAP-2360. Name: Displays the SSID of the client. MAC: Displays the MAC address of the client. Authentication: Displays the type of authentication being used. Signal: Displays the client's signal strength. Status: Displays the status of the power saving feature. D-Link DAP-2360 User Manual 54
  • D-Link DAP-2360 | User Manual - Page 55
    Section 3 - Configuration Stats Ethernet Ethernet Traffic This page displays transmitted and received Statistics: count statistics for packets and bytes. D-Link DAP-2360 User Manual 55
  • D-Link DAP-2360 | User Manual - Page 56
    Section 3 - Configuration WLAN Traffic WLAN Traffic This page displays wireless network statistics Statistics: for data throughput, transmitted and received frames, and frame errors. D-Link DAP-2360 User Manual 56
  • D-Link DAP-2360 | User Manual - Page 57
    and network messages including a time stamp and message type. The log information includes but is not limited to the following items: cold start AP, upgrading firmware, client associate and disassociate with AP, and web login. The web page holds up to 500 logs. D-Link DAP-2360 User Manual 57
  • D-Link DAP-2360 | User Manual - Page 58
    : Enter the SMTP port. Username: Enter your email username. Password: Enter your email password. Confirm Password: Enter your email password again. Schedule: Select when to send the log to your email (in hours). You will receive an email when the log is full too. D-Link DAP-2360 User Manual 58
  • D-Link DAP-2360 | User Manual - Page 59
    Section 3 - Configuration Maintenance Administration Settings Check one or more of the five main categories to display the various hidden administrator parameters and settings displayed on the next five pages. D-Link DAP-2360 User Manual 59
  • D-Link DAP-2360 | User Manual - Page 60
    specific VLAN ID that the administrator will VLAN ID: be allowed to log in from. Limit Check to enable the Limit Administrator IP Administrator IP: address. IP Range: Enter the IP address range that the administrator will be allowed to log in from and then click the Add button. D-Link DAP-2360 User
  • D-Link DAP-2360 | User Manual - Page 61
    Configuration System Name Settings Each of the five main categories display various hidden administrator parameters and settings. System Name: The name of the device. The default name is D-Link DAP-2360. Location: The physical location of the device, e.g. 72nd Floor, D-Link HQ. D-Link DAP-2360 User
  • D-Link DAP-2360 | User Manual - Page 62
    : When changing your password, enter the new password here. The password is case-sensitive. "A" is a different character than "a." The length should be between 0 and 12 characters. Confirm Enter the new password a second time for Password: confirmation purposes. D-Link DAP-2360 User Manual 62
  • D-Link DAP-2360 | User Manual - Page 63
    administrator parameters and settings. Status: Status is enabled by default. Uncheck the box to disable the console. Console Select the type of protocol you would like to Protocol: use, Telnet or SSH. Timeout: Set to 1 Min, 3 Mins, 5 Mins, 10 Mins, 15 Mins or Never. D-Link DAP-2360 User Manual 63
  • D-Link DAP-2360 | User Manual - Page 64
    This option is disabled by default. Public Community String: Enter the public SNMP community string. Private Community String: Enter the private SNMP community string. Trap Status: Check the box to enable Trap Status. Trap Server IP: Enter the Trap Server IP address. D-Link DAP-2360 User Manual 64
  • D-Link DAP-2360 | User Manual - Page 65
    above the file location field. After downloading Drive: the most recent version of firmware for the DAP-2360 from http://support.dlink.com to your local computer, use the Browse button to locate the firmware file on your computer. Click Upload to update the firmware version. Please don't turn the
  • D-Link DAP-2360 | User Manual - Page 66
    Click Download to save the current DAP-2360 configuration to your local computer. Note that if you save one configuration with the administrator's password now, after resetting your DAP-2360, and then updating to this saved configuration file, the password will be gone. D-Link DAP-2360 User Manual
  • D-Link DAP-2360 | User Manual - Page 67
    IP address. Set the Date and Time Manually: You can either manually set the time for your AP here, or you can click the Copy Your Computer's Time Settings button to copy the time from the computer you are using (Make sure that the computer's time is set correctly). D-Link DAP-2360 User Manual
  • D-Link DAP-2360 | User Manual - Page 68
    - Configuration System System Settings Restart the Device: Click Restart to restart the DAP-2360. Restore to Factory Click Restore to restore the DAP-2360 Default Settings: back to factory default settings. Clear Language Pack: Click Clear to remove any loaded language packs. D-Link DAP-2360 User
  • D-Link DAP-2360 | User Manual - Page 69
    Section 3 - Configuration Help Help: Scroll down the Help page for topics and explanations. D-Link DAP-2360 User Manual 69
  • D-Link DAP-2360 | User Manual - Page 70
    . Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DAP-2360 User Manual 70
  • D-Link DAP-2360 | User Manual - Page 71
    button down for 10 seconds. Release the button and the access point will go through its reboot process. Wait about 30 seconds to access the access point. The default IP address is 192.168.0.50. When logging in, the username is admin and leave the password box empty. D-Link DAP-2360 User Manual 71
  • D-Link DAP-2360 | User Manual - Page 72
    . Some firewall software programs may block a DHCP request on newly installed adapters. If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network settings. D-Link DAP-2360 User Manual 72
  • D-Link DAP-2360 | User Manual - Page 73
    : If the router's LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1). D-Link DAP-2360 User Manual 73
  • D-Link DAP-2360 | User Manual - Page 74
    Appendix B - Networking Basics Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DAP-2360 User Manual 74
  • D-Link DAP-2360 | User Manual - Page 75
    Web Browser interface HTTP Secure HTTP (HTTPS) • AP Manager II • SNMP Support D-View Module Private MIB • Command Line Interface Address Access Control Wireless Frequency Range • 2.4 to 2.4835 GHz** Operating Voltage • 48V DC +/- 10% for PoE or wireless signal range. D-Link DAP-2360 User Manual 75
  • D-Link DAP-2360 | User Manual - Page 76
    Appendix C - Technical Specifications LEDs • Power • LAN • 2.4 GHz Temperature • Operating: 0˚C to 40˚C • Storing: - mm • W = 166 mm • H = 37 mm **Please note that operating frequency ranges vary depending on the regulations of individual countries and jurisdictions. D-Link DAP-2360 User Manual 76
  • D-Link DAP-2360 | User Manual - Page 77
    of the access point). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues. For customers within the United States: Phone Support: (877) 354-6555 Internet Support: http://support.dlink.com For customers
  • D-Link DAP-2360 | User Manual - Page 78
    the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DAP-2360 User Manual 78
  • D-Link DAP-2360 | User Manual - Page 79
    any suspected defects with the product. If the product is considered defective, the customer must obtain a Return Material Authorization ("RMA") number by completing the RMA form and entering the assigned Case ID Number at https://rma.dlink.com/. D-Link DAP-2360 User Manual 79
  • D-Link DAP-2360 | User Manual - Page 80
    any manuals or accessories in the shipping package. DLink will only software, firmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link Link DAP-2360 User Manual 80
  • D-Link DAP-2360 | User Manual - Page 81
    D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright ©2008-2010 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link DAP-2360 User Manual 81
  • D-Link DAP-2360 | User Manual - Page 82
    the instructions, may factory to match the intended destination. The firmware setting is not accessible by the end user. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. D-Link DAP-2360 User Manual
  • D-Link DAP-2360 | User Manual - Page 83
    antenna having a maximum gain of 5dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. D-Link DAP-2360 User Manual 83
  • D-Link DAP-2360 | User Manual - Page 84
    Appendix E - Warranty Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 October 20, 2010 D-Link DAP-2360 User Manual 84
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84