D-Link DAP-2553 Product Manual

D-Link DAP-2553 - Wireless N Dual Band Gigabit Access Point Manual

Get D-Link DAP-2553 - Wireless N Dual Band Gigabit Access Point PDF manuals and user guides
UPC - 790069318191
View all D-Link DAP-2553 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DAP-2553 manual content summary:

  • D-Link DAP-2553 | Product Manual - Page 1
  • D-Link DAP-2553 | Product Manual - Page 2
    Activate Settings 17 Basic Settings 18 Wireless 18 Access Point mode 18 WDS with AP mode 20 WDS mode 22 Wireless Client mode 24 Open System/Shared Key Authentication .... 25 WPA/WPA2-Personal Authentication 26 WPA/WPA2-Enterprise Authentication.......... 27 D-Link DAP-2553 User Manual 802
  • D-Link DAP-2553 | Product Manual - Page 3
    Upload 67 Time and Date 68 System 69 System Settings 69 Help 70 Troubleshooting 71 Networking Basics 73 Check your IP address 73 Statically Assign an IP address 74 Technical Specifications 76 Contacting Technical Support 78 Warranty 79 Registration 85 D-Link DAP-2553 User Manual 
  • D-Link DAP-2553 | Product Manual - Page 4
    Overview PPraocdkuacgteOCvoenrtevnietsw • D-Link DAP-2553 AirPremier N Dual Band PoE Access Point • Power Adapter • CAT5 Ethernet Cable • CD-ROM with User Manual • Install Guide Note: Using a power supply with a different voltage rating than the one included with the DAP-2553 will cause damage
  • D-Link DAP-2553 | Product Manual - Page 5
    wireless networking modes: access point, WDS (Wireless Distribution System) with AP, WDS, or Wireless Client mode. Use less wiring, enjoy increased flexibility, save time and money with PoE (Power over Ethernet). With PoE, the DAP-2553 shares power and data over the CAT5 cable, making the setup
  • D-Link DAP-2553 | Product Manual - Page 6
    Service) server, a network administrator can define a list of authorized users who can access the wireless LAN. When attempting to access a wireless LAN with WPA-Enterprise configured, the new client will be requested to enter a username with a password rate. D-Link DAP-2553 User Manual 
  • D-Link DAP-2553 | Product Manual - Page 7
    -2553 is not just fast, but also supports SNMP v.3 for better network management. Superior wireless AP manager software is bundled with the DAP-2553 for network configuration and firmware upgrade. Systems administrators can also set up the DAP-2553 easily with the Web-based configuration. A D-Link
  • D-Link DAP-2553 | Product Manual - Page 8
    modes. Scalability - Configurations can be easily changed and range from Peer-to-Peer networks, suitable for a small number of users to larger Infrastructure networks to accommodate hundreds or thousands of users, depending on the number of wireless devices deployed. D-Link DAP-2553 User Manual 
  • D-Link DAP-2553 | Product Manual - Page 9
    DAP-2553 Wireless Access Point utilizes the 802.11a, 802.11b, 802.11g, and 802.11n standards. The IEEE 802.11n standard is an extension of the 802.11a, 802.11b, and 802.11g standards that came before it. It increases the maximum wireless actual data throughout rate. D-Link DAP-2553 User Manual 
  • D-Link DAP-2553 | Product Manual - Page 10
    fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DAP-2553 User Manual 10
  • D-Link DAP-2553 | Product Manual - Page 11
    Button A pinhole button located beside the Ethernet socket is used to reset the system or restore the factory default settings. Note: After resetting the unit, you will still be able to access the data on your hard drives. LAN (PoE) Port An Ethernet port that connects the unit to a network. This
  • D-Link DAP-2553 | Product Manual - Page 12
    Power Receptacle Port at the back of the Access Point. (See images) Connect Ethernet Connect Ethernet Cable (supplied) into the Ethernet Port at the back of the Access Point. (See images). Then connect the other end of the Ethernet cable to the PC or the network. D-Link DAP-2553 User Manual 12
  • D-Link DAP-2553 | Product Manual - Page 13
    one end of an Ethernet cable (included with your access point) to the LAN port on the DAP-2553 and the other end of the Ethernet cable to either your computer or to your PoE switch. The AP can be powered on by a PoE switch or by the power adapter shipped with the AP. D-Link DAP-2553 User Manual 13
  • D-Link DAP-2553 | Product Manual - Page 14
    Modes Access Point (AP) WDS with AP WDS Wireless Client Create a wireless LAN Wirelessly connect multiple networks while still functioning as a wireless AP Wirelessly connect multiple networks AP acts as a wireless network adapter for your Ethernet-enabled device D-Link DAP-2553 User Manual 14
  • D-Link DAP-2553 | Product Manual - Page 15
    Install Guide included with your router. 4. If you are connecting a desktop computer to your network, install a wireless PCI adapter into an available PCI slot on your desktop computer. 5. Install the drivers for your wireless CardBus adapter into a laptop computer. D-Link DAP-2553 User Manual 15
  • D-Link DAP-2553 | Product Manual - Page 16
    IP address assigned to the DAP-2553, make sure to enter the correct IP address. Enter the user name (admin) and your password. Leave the password field blank by default, and click Login. Note: If you have changed the password, make sure to enter the correct password. D-Link DAP-2553 User Manual
  • D-Link DAP-2553 | Product Manual - Page 17
    screen to save (not activate) your configuration changes. button at the bottom of You may change settings to multiple pages before activating. Once you are finished, click the Configuration button located at the top of the page and then click Save and Activate. D-Link DAP-2553 User Manual 17
  • D-Link DAP-2553 | Product Manual - Page 18
    . Mode: Select Access Point from the drop-down menu. The other three choices are WDS with AP, WDS, and Wireless Client. Network Name Service Set Identifier (SSID) is the name (SSID): designated for a specific wireless local area network (WLAN). The SSID's factory default setting is dlink. The SSID
  • D-Link DAP-2553 | Product Manual - Page 19
    Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. Select WPA-Enterprise to secure your network with the inclusion of a RADIUS server. Select 802.11x to secure your network using 802.11x authentication. D-Link DAP-2553 User Manual 19
  • D-Link DAP-2553 | Product Manual - Page 20
    Wireless Band: Select either 2.4GHz or 5GHz from the drop-down menu. Mode: WDS with AP mode is selected from the drop-down menu. Network Name Service Set Identifier (SSID) is the name designated (SSID): for a specific wireless local area network (WLAN).The SSID's factory default setting is dlink
  • D-Link DAP-2553 | Product Manual - Page 21
    Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled, this option is not available. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-2553 User Manual 21
  • D-Link DAP-2553 | Product Manual - Page 22
    Section 3 - Configuration WDS mode In WDS mode, the DAP-2553 wirelessly connects multiple networks, without functioning as a wireless AP. Wireless Band: Select either 2.4GHz or 5GHz from the drop-down menu. Mode: WDS is selected from the drop-down menu. Network Name Service Set Identifier (SSID) is
  • D-Link DAP-2553 | Product Manual - Page 23
    Section 3 - Configuration Site Survey: Click on the Scan button to search for available wireless networks, then click on the the same WEP settings. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-2553 User Manual 23
  • D-Link DAP-2553 | Product Manual - Page 24
    Wireless Band: Select either 2.4GHz or 5GHz from the drop-down menu. Mode: Wireless Client is selected from the drop-down menu. Network Name (SSID): Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN).The SSID's factory default setting is dlink
  • D-Link DAP-2553 | Product Manual - Page 25
    Section 3 - Configuration Open System/Shared Key Authentication Encryption: Use the radio button to disable or enable encryption. Key (American Standard Code for Information Interchange) is a code that represents English letters using numbers ranging from 0-127. D-Link DAP-2553 User Manual 25
  • D-Link DAP-2553 | Product Manual - Page 26
    Periodical Key Change to have Key Change: the access point automatically change your PassPhrase. Enter the Activate From time and the time in hours to change the key. PassPhrase: When you select WPA-Personal, please enter a PassPhrase in the corresponding field. D-Link DAP-2553 User Manual 26
  • D-Link DAP-2553 | Product Manual - Page 27
    lower interval may reduce data transfer rates. Network Access Enable or disable Microsoft Network Access Protection: Protection. RADIUS Server: Enter the IP address of the RADIUS server. RADIUS Port: Enter the RADIUS port. RADIUS Secret: Enter the RADIUS secret. D-Link DAP-2553 User Manual 27
  • D-Link DAP-2553 | Product Manual - Page 28
    during which the group key will be valid (1800 is the recommended value). A lower interval may reduce data transfer rates. RADIUS Server: Enter the IP address of the RADIUS server. RADIUS Port: Enter the RADIUS port. RADIUS Secret: Enter the RADIUS secret. D-Link DAP-2553 User Manual 28
  • D-Link DAP-2553 | Product Manual - Page 29
    . Subnet Enter the subnet mask. All devices in the network Mask: must share the same subnet mask. Default Enter the IP address of the gateway in your network. Gateway: If there is a gateway in your network, please enter an IP address within the range of your network. D-Link DAP-2553 User Manual 29
  • D-Link DAP-2553 | Product Manual - Page 30
    Configuration Advanced Settings Performance Wireless: Use the drop-down menu to turn the wireless function On or Off. Wireless Mode: The different combination of clients that can be supported include Mixed 802.11n, 802.11g and 802.11b, Mixed 802.11g and 802.11b and 802.11n Only in the 2.4 GHz band
  • D-Link DAP-2553 | Product Manual - Page 31
    allow clients to associate with the AP. User Limit (0-64): Set the maximum amount of users that are allowed access (0-64 users). To use this feature, the Connection Limit above must be enabled. For most users, a limit of 10 is recommended. The default setting is 20. D-Link DAP-2553 User Manual 31
  • D-Link DAP-2553 | Product Manual - Page 32
    Configuration Multi-SSID The device supports up to four multiple Service Set Identifiers. In the Basic > Wireless section, you can set the Primary SSID. The SSID's factory default setting is dlink description of the WPA-Enterprise parameters, please go to page 25. D-Link DAP-2553 User Manual 32
  • D-Link DAP-2553 | Product Manual - Page 33
    the corresponding field. PassPhrase: RADIUS Server: When you select WPA-Enterprise, enter the IP address of the RADIUS server. In addition, you must configure RADIUS Port and RADIUS Secret. RADIUS Port: Enter the RADIUS port. RADIUS Secret: Enter the RADIUS secret. D-Link DAP-2553 User Manual 33
  • D-Link DAP-2553 | Product Manual - Page 34
    3 - Configuration VLAN VLAN List The DAP-2553 supports VLANs. VLANs can be created with a Name and VID. Mgmt (TCP stack), LAN, Primary/ Multiple SSID, and WDS connection can be assigned to VLANs as they are physical ports. Any packet which enters the DAP-2553 without a VLAN tag will have a VLAN tag
  • D-Link DAP-2553 | Product Manual - Page 35
    modify an item on the VLAN List tab. Port Name: The name of the port is displayed in this column. Tag VID: The Tagged VID is displayed in this column. Untag VID: The Untagged VID is displayed in this column. PVID: The Port VLAN Identifier is displayed in this column. D-Link DAP-2553 User Manual 35
  • D-Link DAP-2553 | Product Manual - Page 36
    to configure VLANs. Once you have made the desired changes, click the Save button to let your changes take effect. VLAN Status: Use the radio button to toggle to Enable. VLAN ID: Provide a number between 1 and 4094 for the Internal VLAN. VLAN Name: Enter the VLAN to add or modify. D-Link DAP-2553
  • D-Link DAP-2553 | Product Manual - Page 37
    as to configure various types of PVID settings. Click the Save button to let your changes take effect. VLAN Status: Use the radio button to toggle between Enable and Disable. PVID Auto Assign Use the radio button to toggle PVID auto Status: assign status to Enable. D-Link DAP-2553 User Manual 37
  • D-Link DAP-2553 | Product Manual - Page 38
    Wireless Intrusion Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click the Save button to let your changes take effect. AP List: The choices include All, Valid, Neighbor, Rogue, and New. Detect: Click this button to initiate a scan of the network. D-Link DAP-2553
  • D-Link DAP-2553 | Product Manual - Page 39
    Section 3 - Configuration Schedule The Wireless Schedule Settings window is used to add and modify scheduling rules on the device. Click the Save button to let your changes take effect. Wireless Use the drop Save: Click the Save button to save your created rules. D-Link DAP-2553 User Manual 39
  • D-Link DAP-2553 | Product Manual - Page 40
    de-prioritize streams that exhibit bulk transfer characteristics, such as file transfers, while leaving interactive traffic, such as gaming or VoIP, running at a normal priority. D-Link DAP-2553 User Manual 40
  • D-Link DAP-2553 | Product Manual - Page 41
    Section 3 - Configuration Name: Enter a name for the new QoS IP address falls within the range set here. Host 2 Port The rule applies to a flow of messages for which host 2's port number is within the range set here when the Protocol is set Range: to TCP, UDP, or Both. D-Link DAP-2553 User Manual
  • D-Link DAP-2553 | Product Manual - Page 42
    current AP array status for the following parameters: Array Name, Master IP, MAC, Master, Backup Master, Slave, and Total. Current Array This table displays all the current array members. The Members: DAP-2553 AP array feature supports up to eight AP array members. D-Link DAP-2553 User Manual 42
  • D-Link DAP-2553 | Product Manual - Page 43
    Section 3 - Configuration Wireless Basic Settings Network Name Select this option to use a Link Integrity: Select this option to use Link Integrity. Connection Limit: Select this option to use a Connection Limit. Wireless ACL: Select this option to use Wireless ACL. D-Link DAP-2553 User Manual
  • D-Link DAP-2553 | Product Manual - Page 44
    use a System Name. Login Settings: Select this option to use Login Settings. Console Settings: Select this option to enable Console Settings. SNMP Settings: Select this option to enable SNMP Settings. Ping Control Settings: Select this option to enable Ping Control. D-Link DAP-2553 User Manual 44
  • D-Link DAP-2553 | Product Manual - Page 45
    to add IP/MAC address mapping to prevent ARP spoofing attack. ARP Spoofing Prevention: This check box allows you to enable the ARP spoofing prevention function. Gateway IP Address: Enter a gateway IP address. Gateway MAC Address: Enter a gateway MAC address. D-Link DAP-2553 User Manual 45
  • D-Link DAP-2553 | Product Manual - Page 46
    : Enter the IP address of the gateway on the network. WINS: Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that determines the IP address of a network computer that has a dynamically assigned IP address. D-Link DAP-2553 User Manual 46
  • D-Link DAP-2553 | Product Manual - Page 47
    www.dlink.com into IP addresses. Domain Name: Enter the domain name of the network, if applicable. (An example of a domain name is: www.dlink.com.) Lease Time The lease time is the period of time before the DHCP server will assign new IP addresses. (60-31536000 sec): D-Link DAP-2553 User Manual 47
  • D-Link DAP-2553 | Product Manual - Page 48
    wireless devices to receive IP addresses automatically without the need to manually assign IP addresses. Select Enable to allow the DAP-2553 to function as a DHCP server. Assigned IP: Use the Static Pool Settings to assign the same IP address to a device every time you start up. The IP addresses
  • D-Link DAP-2553 | Product Manual - Page 49
    a dynamically assigned IP address, if applicable. DNS: Enter the Domain Name System (DNS) server address for the wireless network. The DNS server translates domain names such as www.dlink.com into IP addresses. Domain Name: Specify the domain name for the network. D-Link DAP-2553 User Manual 49
  • D-Link DAP-2553 | Product Manual - Page 50
    that is assigned an IP address from the DHCP dynamic pool. Binding MAC The MAC address of a device on the network that is within the DHCP static IP address pool. Address: Assigned IP The current corresponding DHCP-assigned static IP address of the device. Address: D-Link DAP-2553 User Manual 50
  • D-Link DAP-2553 | Product Manual - Page 51
    an ACL list and upload it to the access point instead of manually entering the information. Once created, click the Browse button and locate your file. Select it and then click Upload. Download ACL Click Download to export the ACL to a file on File: your computer. D-Link DAP-2553 User Manual 51
  • D-Link DAP-2553 | Product Manual - Page 52
    blocked. Wireless devices can still send data to the Ethernet. Internal Station Connection: The default value is Enable, which allows stations to inter-communicate by connecting to a target AP. When disabled, wireless stations cannot exchange data through the AP. D-Link DAP-2553 User Manual 52
  • D-Link DAP-2553 | Product Manual - Page 53
    Section 3 - Configuration Status Device Information Device This read-only window displays the configuration Information: settings of the DAP-2553, including the firmware version and the device's MAC address. D-Link DAP-2553 User Manual 53
  • D-Link DAP-2553 | Product Manual - Page 54
    MAC address of the client. Band: Displays the wireless band that the client is connected to. Authentication: Displays the type of authentication being used. Signal: Displays the client's signal strength. Power Saving Displays the status of the power saving Mode: feature. D-Link DAP-2553 User Manual
  • D-Link DAP-2553 | Product Manual - Page 55
    the DAP-2553. Name: Displays the SSID of the client. MAC: Displays the MAC address of the client. Authentication: Displays the type of authentication being used. Signal: Displays the client's signal strength. Status: Displays the status of the power saving feature. D-Link DAP-2553 User Manual 55
  • D-Link DAP-2553 | Product Manual - Page 56
    Section 3 - Configuration Stats Ethernet Ethernet Traffic This page displays transmitted and received Statistics: count statistics for packets and bytes. D-Link DAP-2553 User Manual 56
  • D-Link DAP-2553 | Product Manual - Page 57
    Section 3 - Configuration WLAN Traffic WLAN Traffic This page displays wireless network statistics Statistics: for data throughput, transmitted and received frames, and frame errors. D-Link DAP-2553 User Manual 57
  • D-Link DAP-2553 | Product Manual - Page 58
    and network messages including a time stamp and message type. The log information includes but is not limited to the following items: cold start AP, upgrading firmware, client associate and disassociate with AP, and web login. The web page holds up to 500 logs. D-Link DAP-2553 User Manual 58
  • D-Link DAP-2553 | Product Manual - Page 59
    Section 3 - Configuration Log Settings Log Server/IP Enter the IP address of the server you would Address: like to send the DAP-2553 log to. Log Type: Check the box for the type of activity you want to log. There are three types: System Activity, Wireless Activity, and Notice. Email Notification
  • D-Link DAP-2553 | Product Manual - Page 60
    Section 3 - Configuration Maintenance Administration Settings Check one or more of the five main categories to display the various hidden administrator parameters and settings displayed on the next five pages. D-Link DAP-2553 User Manual 60
  • D-Link DAP-2553 | Product Manual - Page 61
    VLAN ID that the administrator will VLAN ID: be allowed to log in from. Limit Check to enable the Limit Administrator IP Administrator IP: address. IP Range: Enter the IP address range that the administrator will be allowed to log in from and then click the Add button. D-Link DAP-2553 User Manual
  • D-Link DAP-2553 | Product Manual - Page 62
    - Configuration System Name Settings Each of the five main categories display various hidden administrator parameters and settings. System Name: The name of the device. The default name is D-Link DAP-2553. Location: The physical location of the device, e.g. 72nd Floor, D-Link HQ. D-Link DAP-2553
  • D-Link DAP-2553 | Product Manual - Page 63
    : When changing your password, enter the new password here. The password is case-sensitive. "A" is a different character than "a." The length should be between 0 and 12 characters. Confirm Enter the new password a second time for Password: confirmation purposes. D-Link DAP-2553 User Manual 63
  • D-Link DAP-2553 | Product Manual - Page 64
    administrator parameters and settings. Status: Status is enabled by default. Uncheck the box to disable the console. Console Select the type of protocol you would like to Protocol: use, Telnet or SSH. Timeout: Set to 1 Min, 3 Mins, 5 Mins, 10 Mins, 15 Mins or Never. D-Link DAP-2553 User Manual 64
  • D-Link DAP-2553 | Product Manual - Page 65
    This option is disabled by default. Public Community String: Enter the public SNMP community string. Private Community String: Enter the private SNMP community string. Trap Status: Check the box to enable Trap Status. Trap Server IP: Enter the Trap Server IP address. D-Link DAP-2553 User Manual 65
  • D-Link DAP-2553 | Product Manual - Page 66
    above the file location field. After downloading Drive: the most recent version of firmware for the DAP-2553 from http://support.dlink.com to your local computer, use the Browse button to locate the firmware file on your computer. Click Upload to update the firmware version. Please don't turn the
  • D-Link DAP-2553 | Product Manual - Page 67
    Click Download to save the current DAP-2553 configuration to your local computer. Note that if you save one configuration with the administrator's password now, after resetting your DAP-2553, and then updating to this saved configuration file, the password will be gone. D-Link DAP-2553 User Manual
  • D-Link DAP-2553 | Product Manual - Page 68
    IP address. Set the Date and Time Manually: You can either manually set the time for your AP here, or you can click the Copy Your Computer's Time Settings button to copy the time from the computer you are using (Make sure that the computer's time is set correctly). D-Link DAP-2553 User Manual
  • D-Link DAP-2553 | Product Manual - Page 69
    - Configuration System System Settings Restart the Device: Click Restart to restart the DAP-2553. Restore to Factory Click Restore to restore the DAP-2553 Default Settings: back to factory default settings. Clear Language Pack: Click Clear to remove any loaded language packs. D-Link DAP-2553 User
  • D-Link DAP-2553 | Product Manual - Page 70
    Section 3 - Configuration Help Help: Scroll down the Help page for topics and explanations. D-Link DAP-2553 User Manual 70
  • D-Link DAP-2553 | Product Manual - Page 71
    problems. (The examples below are illustrated in Windows® XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples.) 1. Why can't I access the web-based configuration utility? When entering the IP address of the D-Link access point
  • D-Link DAP-2553 | Product Manual - Page 72
    button down for 10 seconds. Release the button and the access point will go through its reboot process. Wait about 30 seconds to access the access point. The default IP address is 192.168.0.50. When logging in, the username is admin and leave the password box empty. D-Link DAP-2553 User Manual 72
  • D-Link DAP-2553 | Product Manual - Page 73
    . Some firewall software programs may block a DHCP request on newly installed adapters. If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network settings. D-Link DAP-2553 User Manual 73
  • D-Link DAP-2553 | Product Manual - Page 74
    : If the router's LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1). D-Link DAP-2553 User Manual 74
  • D-Link DAP-2553 | Product Manual - Page 75
    Appendix B - Networking Basics Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DAP-2553 User Manual 75
  • D-Link DAP-2553 | Product Manual - Page 76
    Access Control Wireless Frequency Range • 2.4 to 2.4835 GHz and 5.15 to 5.85 GHz** Network Management Operating Voltage • Web Browser interface HTTP • 48V DC +/- 10% for PoE or 5V/2.5A Secure HTTP (HTTPS) • AP Manager II • SNMP Support wireless signal range. D-Link DAP-2553 User Manual 76
  • D-Link DAP-2553 | Product Manual - Page 77
    Specifications Transmit Output Power (at Antenna Connector) • 18dBm @ 2.4GHz • 17dBm @ 5GHz EIRP • 25.7dBm @ 2.4GHz • 26.7dBm @ 5GHz Max Power Consumption • 10. . The DAP-2553 isn't supported in the 5.25~5.35 GHz and 5.47 ~ 5.725 GHz frequency ranges in some regions. D-Link DAP-2553 User Manual 77
  • D-Link DAP-2553 | Product Manual - Page 78
    asked questions and answers to technical issues. For customers within the United States: Phone Support: (877) 354-6555 Internet Support: http://support.dlink.com For customers within Canada: Phone Support: (877) 354-6560 Internet Support: http://support.dlink.ca D-Link DAP-2553 User Manual 78
  • D-Link DAP-2553 | Product Manual - Page 79
    the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DAP-2553 User Manual 79
  • D-Link DAP-2553 | Product Manual - Page 80
    Link's then current functional specifications for the Software, as set Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price purchase point based Number from D-Link Technical Support at 1-877-354 dlink.com/. D-Link DAP-2553 User Manual 80
  • D-Link DAP-2553 | Product Manual - Page 81
    Link. Return shipping charges shall be prepaid by D-Link if you use an address firmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link Link DAP-2553 User Manual 81
  • D-Link DAP-2553 | Product Manual - Page 82
    SET Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright ©2008-2009 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link DAP-2553 User Manual
  • D-Link DAP-2553 | Product Manual - Page 83
    instructions, antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DAP-2553 User Manual
  • D-Link DAP-2553 | Product Manual - Page 84
    equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This antenna having a maximum gain of 5dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. D-Link DAP-2553 User Manual
  • D-Link DAP-2553 | Product Manual - Page 85
    Appendix E - Warranty Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.3 January 20, 2010 D-Link DAP-2553 User Manual 85
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85