D-Link DAP-2590 Product Manual - Page 28

Home > Advanced Settings - step by step configuration

Get D-Link DAP-2590 - AirPremier N Dual Band PoE Access Point PDF manuals and user guides
UPC - 790069316043
View all D-Link DAP-2590 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Section 3 - Configuration Home > Advanced Settings Performance The Performance Settings window offers a number of user-controlled settings designed to optimize the performance of the DAP-2590. After completing the desired settings, click the Save button to let your changes take effect. Wireless: Use the drop-down menu to turn the wireless function On or Off. Wireless Mode: The different combination of clients that can be supported include Mixed 802.11n, 802.11g and 802.11b, Mixed 802.11g and 802.11b, and 802.11n Only in the 2.4 GHz band and Mixed 802.11n and 802.11a, 802.11a only, and 802.11n Only in the 5 GHz band. Please note that when backwards compatibility is enabled for legacy (802.11a/g/b) clients, degradation of 802.11n (draft) wireless performance is expected. Data Rate*: Indicate the base transfer rate of wireless adapters on the wireless LAN. The AP will adjust the base transfer rate depending on the base rate of the connected device. If there are obstacles or interference, the AP will step down the rate. This option is enabled in Mixed 802.11g and 802.11b mode (for 2.4 GHz) and 802.11a only mode (for 5 GHz). The choices available are Best (Up to 54), 54, 48, 36, 24, 18, 12, 9, and 6 for 5 GHz and Best (Up to 54), 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2 and 1 for 2.4 GHz. Beacon Interval Beacons are packets sent by an access point to synchronize a wireless network. Specify a value in milliseconds. The default (25-500): (100) is recommended. Setting a higher beacon interval can help to save the power of wireless clients, while setting a lower one can help a wireless client connect to an access point faster. *Maximum wireless signal rate derived from IEEE Standard 802.11g, 802.11a and Draft 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DAP-2590 User Manual 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
±¶
D-Link DAP-±590 User Manual
Section ² - Configuration
Home > Advanced Settings
Wireless:
Wireless Mode:
Use the drop-down menu to turn the wireless function
On
or
Off
.
The different combination of clients that can be
supported include
Mixed 802.11n, 802.11g and
802.11b
,
Mixed 802.11g and 802.11b
, and
802.11n
Only
in the 2.4 �Hz band and
Mixed 802.11n and
802.11a
,
802.11a only
, and
802.11n Only
in the
5 �Hz band. Please note that when backwards
compatibility is enabled for legacy (802.11a/g/b)
clients, degradation of 802.11n (draft) wireless
performance is expected.
The Performance Settings window offers a number of user-controlled
settings designed to optimize the performance of the DAP-2590.
After completing the desired settings, click the Save button to let
your changes take effect.
Beacons are packets sent by an access point to synchronize a wireless network. Specify a value in milliseconds. The default
(
100
) is recommended. Setting a higher beacon interval can help to save the power of wireless clients, while setting a lower
one can help a wireless client connect to an access point faster.
Indicate the base transfer rate of wireless adapters on the wireless LAN. The AP will adjust the base transfer rate depending
on the base rate of the connected device. If there are obstacles or interference, the AP will step down the rate. This option
is enabled in Mixed 802.11g and 802.11b mode (for 2.4 �Hz) and 802.11a only mode (for 5 �Hz). The choices available
are
Best (Up to 54)
,
54
,
48
,
36
,
24
,
18
,
12
,
9
, and
6
for 5 �Hz and
Best (Up to 54)
,
54
,
48
,
36
,
24
,
18
,
12
,
9
,
6
,
11
,
5.5
,
2
and
1
for 2.4 �Hz.
Data Rate*:
Beacon Interval
(25-500):
±Maximum wireless signal rate derived from IEEE Standard 802.11g, 802.11a and Draft 802.11n specifications. Actual data throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental
conditions will adversely affect wireless signal range.
Performance