D-Link DAP-2662 Product Manual 2

D-Link DAP-2662 Manual

Get D-Link DAP-2662 PDF manuals and user guides View all D-Link DAP-2662 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DAP-2662 manual content summary:

  • D-Link DAP-2662 | Product Manual 2 - Page 1
    NUCLIAS CONNECT DAP-2662 User Guide 2019 | Business Class Networking V 1.00
  • D-Link DAP-2662 | Product Manual 2 - Page 2
    Metrics 43 LIST 44 OSU 45 Captive Portal 47 Authentication Settings-Web Redirection Only.47 Authentication Settings- Username/Password...49 Authentication Settings- Passcode 51 Authentication Settings- Remote RADIUS............53 Authentication Settings- LDAP 55 Authentication Settings- POP3
  • D-Link DAP-2662 | Product Manual 2 - Page 3
    81 Country Settings 81 DDP Settings 82 Nuclias Connect Settings 82 Firmware and SSL Upload 83 Configuration File Upload 84 Time and Date Installation Considerations 90 Troubleshooting 91 Why can't I access the web-based configuration utility 91 What can I do if I forgot my password 91 How to
  • D-Link DAP-2662 | Product Manual 2 - Page 4
    Link Nuclias Connect free-to-download software is capable of managing Localized Throttling are enabled. Nuclias Connect supports multi-tenancy, so network admins can grant localized management authority for local networks. In addition, because APs can support Services, such as Captive Portal or Wi-
  • D-Link DAP-2662 | Product Manual 2 - Page 5
    . & Batch Config. • Multilingual Support • Intuitive Interface • Multi-Tenant & Role-Based Administration • Payment Gateway (Paypal) Integration and Front-Desk Ticket Management For more information on how to use Nuclias Connect with DAP-2662, please refer to the Nuclias Connect User Guide. 5
  • D-Link DAP-2662 | Product Manual 2 - Page 6
    • Mounting Plate and Hardware Package Contents Note: Using a power supply with a different voltage rating than the one included with the DAP-2662 will cause damage and void the warranty for this product. System Requirements y Computers with Windows®, Macintosh®, or Linux-based operating systems
  • D-Link DAP-2662 | Product Manual 2 - Page 7
    that the DAP-2662 is working properly. 2 Power Receptor Connect the supplied power adapter. 3 LAN (PoE) Port Connect to a Power over Ethernet (PoE) switch or router via an Ethernet cable. Press and hold for five seconds to reset the access point 4 Reset Button to the factory default
  • D-Link DAP-2662 | Product Manual 2 - Page 8
    methods: 1. Plug one end of your Ethernet cable into the LAN port of the DAP-2662, and the other end into a port on a 802.3at PoE switch. 2. adaptor to plug into the power receptor of the DAP-2662 Configure the Access Point Computer with DHCP Server Computer with DHCP Server Computer with DHCP
  • D-Link DAP-2662 | Product Manual 2 - Page 9
    manage the DAP-2662, use one of the following methods: 1. Connect the access point and your computer to the same PoE switch. Manage the access point from the computer. Enter dap2662.local in the address field of your browser. Log in to the Administration user interface. The default login information
  • D-Link DAP-2662 | Product Manual 2 - Page 10
    and System Country functions. After logging in to the user interface, fill in the New Password and Confirm New Password fields. In the System Time function, select Using Network Time Protocol (NTP) or Manually to define the system time. If required, click the Daylight Saving Offset drop-down menu
  • D-Link DAP-2662 | Product Manual 2 - Page 11
    Web User Interface Web User Interface The DAP-2662 supports an elaborate web user interface where the user can configure and monitor the device. Launch a web browser, type in http://dap2662.local/ and then press Enter to login. The default username and password is: admin Most of the configurable
  • D-Link DAP-2662 | Product Manual 2 - Page 12
    menu. Network Name (SSID): Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID's factory default setting is dlink. The only occurs when the AP is booting up. To manually select a channel, set this option to Disable and select a channel from
  • D-Link DAP-2662 | Product Manual 2 - Page 13
    that share the same WEP settings. If multi-SSID is enabled, this option is not available. • Select WPA-Personal to secure your network using a password and dynamic key. No RADIUS server is required. • Select WPA-Enterprise to secure your network with the inclusion of a RADIUS server. • Select 802.1X
  • D-Link DAP-2662 | Product Manual 2 - Page 14
    Name (SSID): Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID's factory default setting is dlink. that will provide the best wireless performance. This feature is not supported in WDS with AP mode. The channel selection process only
  • D-Link DAP-2662 | Product Manual 2 - Page 15
    to choose Open System, or WPA-Personal. • Select Open System to communicate the key across the network. • Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. 15
  • D-Link DAP-2662 | Product Manual 2 - Page 16
    drop-down menu. Mode: WDS is selected from the drop-down menu. Network Name (SSID): Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID's factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless
  • D-Link DAP-2662 | Product Manual 2 - Page 17
    to choose Open System, or WPA-Personal. • Select Open System to communicate the key across the network. • Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. 17
  • D-Link DAP-2662 | Product Manual 2 - Page 18
    . Network Name (SSID): Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN).The SSID's factory default setting is dlink. The not supported in Wireless Client mode. Channel: The channel used will be displayed, and matches the AP that the DAP-2662 is
  • D-Link DAP-2662 | Product Manual 2 - Page 19
    Web User Interface Wireless Security Wireless security is a key concern for any wireless network installed. Wireless networks will broadcast it's presence for anyone to connect to it. Today, wireless security has advanced to a level where it is virtually impenetrable. There are mainly two forms of
  • D-Link DAP-2662 | Product Manual 2 - Page 20
    select AUTO, AES, or TKIP from the pull down menu. Group Key Update: Select the interval during which the group key will be valid. The default value of 1800 is recommended. Pass Phrase: When you selectWPA-Personal, please enter a Pass Phrase in the corresponding field. 20
  • D-Link DAP-2662 | Product Manual 2 - Page 21
    Web User Interface WPA Mode: When WPA-Enterprise is selected, you must also select a WPA mode from the drop-down menu: AUTO (WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use different algorithms. AUTO (WPA or WPA2) allows you to use both WPA and WPA2. Cipher Type: When WPA-Enterprise is
  • D-Link DAP-2662 | Product Manual 2 - Page 22
    made. If you wish to assign a static IP address to the DAP-2662, choose Static IP (Manual). IP Address: Assign a static IP address that is within the IP mask. Default Gateway: Enter the IP address of the gateway/router in your network. DNS: Enter a DNS server IP address. This is usually the local IP
  • D-Link DAP-2662 | Product Manual 2 - Page 23
    IPv6 Enable IPv6: Check to enable the IPv6 Get IP From: Auto is chosen here. Choose this option the DAP-2662 can get IPv6 address automatically or use Static to set IPv6 address manually. Other fields here will be grayed out when Auto is selected. IP Address: Enter the LAN IPv6 address used
  • D-Link DAP-2662 | Product Manual 2 - Page 24
    Advanced Settings In the Advanced Settings Section users can configure advanced settings concerning Performance, Multiple SSID,VLAN, Security, Quality of Service, AP Array, Web Redirection, DHCP Server, Filters and Scheduling. The following pages will explain settings found in the Advanced Settings
  • D-Link DAP-2662 | Product Manual 2 - Page 25
    or Off. Wireless Mode: The different combinations of clients that can be supported include Mixed 802.11n, 802.11g and 802.11b, Mixed 802.11g to synchronize a 500): wireless network. Specify a value in milliseconds. The default (100) is recommended. Setting a higher beacon interval can help to save
  • D-Link DAP-2662 | Product Manual 2 - Page 26
    Fi network. Ack Time Out To effectively optimize throughput over long distance links enter a value for Acknowledgement Time Out between 25 and 200 (2.4 GHZ Multicast Rate: Adjust the multicast packet data rate here. The multicast rate is supported in AP mode, (2.4 GHZ and 5 GHZ) and WDS with AP mode
  • D-Link DAP-2662 | Product Manual 2 - Page 27
    Band Steering: Use the drop-down menu to Enable the 5G Preferred function. When the wireless clients support both 2.4GHz and 5GHz and the 2.4GHz signal is not strong enough, the device will use the percentage that has been specified, the DAP-2662 will not allow clients to associate with the AP. 27
  • D-Link DAP-2662 | Product Manual 2 - Page 28
    default setting is 20. 11n Preferred: Use the drop-down menu to Enable the 11n Preferred function. The wireless clients with 802.11n protocol will have higher priority to connect to the device. Network Utilization: Set the maximum utilization of this access point for service. The DAP-2662 will
  • D-Link DAP-2662 | Product Manual 2 - Page 29
    device supports up to four multiple Service Set Identifiers. You can set the Primary SSID under Basic > Wireless. The SSID's factory default setting . SSID: Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID's factory default setting is
  • D-Link DAP-2662 | Product Manual 2 - Page 30
    Auto, AES, or TKIP from the drop-down menu. Group Key Update Interval: Select the interval during which the group key will be valid. The default value of 1800 seconds is recommended. Pass Phrase: When you select WPA-Personal, please enter a Pass Phrase in the corresponding field. Confirm Pass Phrase
  • D-Link DAP-2662 | Product Manual 2 - Page 31
    Web User Interface VLAN VLAN List The DAP-2662 supports VLANs. VLANs can be created with a Name and VID. Mgmt (TCP stack), LAN, Primary/Multiple SSID, and WDS connection can be assigned to VLANs as they are physical ports. Any packet which enters the DAP-2662 without a VLAN tag will have a VLAN tag
  • D-Link DAP-2662 | Product Manual 2 - Page 32
    ports. If you want to configure the guest and internal networks on a Virtual LAN (VLAN), the switch and DHCP server you are using must also support VLANs. As a prerequisite step, configure a port on the switch for handling VLAN tagged packets as described in the IEEE 802.1Q standard. VLAN Status
  • D-Link DAP-2662 | Product Manual 2 - Page 33
    Web User Interface Add/Edit VLAN The Add/Edit VLAN tab is used to configure VLANs. Once you have made the desired changes, click Save to have your changes take effect. VLAN Status: Use the radio button to toggle to Enable. VLAN ID: Provide a number between 1 and 4094 for the Internal VLAN. VLAN Name
  • D-Link DAP-2662 | Product Manual 2 - Page 34
    Web User Interface PVID Settings The PVID Setting tab is used to enable/disable the Port VLAN Identifier Auto Assign Status as well as to configure various types of PVID settings. Click Save button to have your changes take effect. VLAN Status: Use the radio button to toggle between Enable and
  • D-Link DAP-2662 | Product Manual 2 - Page 35
    alternative category. From the AP List select a detected AP and click Set as Valid, Set as Neighborhood, Set as Rogue, or Set as New to manually define the category type for the AP. Alternatively, click the radio button to mark all new access points as valid or rogue. 35
  • D-Link DAP-2662 | Product Manual 2 - Page 36
    Web User Interface Schedule The Wireless Schedule Settings window is used to add and modify scheduling rules on the device. Click Save for your changes to take effect. Wireless Schedule: Use the drop-down menu to enable the device's scheduling feature. Name: Enter a name for the new scheduling rule
  • D-Link DAP-2662 | Product Manual 2 - Page 37
    Web User Interface Internal RADIUS Server The DAP-2662 features a built-in RADIUS server. Once you have user access to the internal RADIUS server. Password: Enter a password to authenticate user access to the internal RADIUS server. The length of your password should be 8~64. Status: Toggle the
  • D-Link DAP-2662 | Product Manual 2 - Page 38
    Web User Interface ARP Spoofing Prevention The ARP Spoofing Prevention feature allows users to add IP/MAC address mapping to prevent ARP Spoofing attack. ARP Spoofing Prevention: This check box allows you to enable the ARP Spoofing prevention function. Gateway IP Address: Enter a gateway IP address.
  • D-Link DAP-2662 | Product Manual 2 - Page 39
    Web User Interface Bandwidth Optimization The Bandwidth Optimization window allows the user to manage the bandwidth of the device and arrange the bandwidth for various wireless clients. When the Bandwidth Optimization rule is finished, click the Add button. To discard the Add Bandwidth Optimization
  • D-Link DAP-2662 | Product Manual 2 - Page 40
    band between 2.4GHz and 5GHz. SSID Index: Use the drop-down menu to select the SSID for the specified wireless band. Downlink Speed: Enter the download speed limit in either Kbits/sec or Mbits/sec for the rule. Uplink Speed: Enter the upload speed limit in either Kbits/sec or Mbits
  • D-Link DAP-2662 | Product Manual 2 - Page 41
    Web User Interface Hotspot 2.0 Hotspot 2.0 (HS2) is a new networking standard designed to make the process of connecting to public wireless hotspots easier and more secure with seamless authentication and encryption between your device and access points. This is based on the IEEE 802.11u standard
  • D-Link DAP-2662 | Product Manual 2 - Page 42
    access for this network. ASRA: Choose enable if the network has Additional Steps required for Access. ESR: Choose enable to indicate that emergency services are reachable through this device. Venue Group: Specify group venue belongs to. Venue Type: Specify type of venue. Venue Name: Specify name of
  • D-Link DAP-2662 | Product Manual 2 - Page 43
    : Information about the status of the Access Point's WAN connection. WAN Symmetric Link: Set to 1 if the WAN link is symmetric (upload and download speeds are the same), or set to 0 if not. WAN At Capacity: Set to 1 if the Access Point or the network is at its max
  • D-Link DAP-2662 | Product Manual 2 - Page 44
    one or more domain names for the entity operating the AP. Roaming Consortium: Identifies service providers or groups of roaming partners whose security credentials can be used to connect to operator. Name: QoS Map: Bit set to indicate support for QoS mapping from 802.11 to external networks. 44
  • D-Link DAP-2662 | Product Manual 2 - Page 45
    Spcify preferred list of encoding methods that the OSU server supports in order of priority. OSU Config: Choosefromdropdownlistwhichconfiguration set to OSU Service Choose the service description lagnuage from Description: drop down list. Specify the service provider's descrption of service offering
  • D-Link DAP-2662 | Product Manual 2 - Page 46
    Web User Interface OSU Icon Name: Specify icon name. OSU Icon Width: Specify width of the icon, in pixels. OSU Icon Height: Spcify length of the icon, in pixels. OSU Icon Type: Specifiy icon file type, where the icon type is any mim-type graphic format. OSU Icon File Path: Specify location of icon
  • D-Link DAP-2662 | Product Manual 2 - Page 47
    Password, Passcode, Remote RADIUS, LDAP and POP3. In this section we'll discuss the Web Redirection option. Web Redirection State : Default IP (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or if you wish to assign a static IP address to the DAP-2662.
  • D-Link DAP-2662 | Product Manual 2 - Page 48
    same subnet mask. Gateway : Enter the IP address of the gateway/router in your network. DNS : Enter a DNS server IP address. This is usually the local IP address of your gateway/router. 48
  • D-Link DAP-2662 | Product Manual 2 - Page 49
    Password, Passcode, Remote RADIUS, LDAP and POP3. In this section we'll discuss the Username/Password option. Web Redirection State : Default (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or if you wish to assign a static IP address to the DAP-2662.
  • D-Link DAP-2662 | Product Manual 2 - Page 50
    same subnet mask. Gateway : Enter the IP address of the gateway/router in your network. DNS : Enter a DNS server IP address. This is usually the local IP address of your gateway/router. Username: Enter the username for the new account here. Password: Enter the password for the new account here. 50
  • D-Link DAP-2662 | Product Manual 2 - Page 51
    /Password, Passcode, Remote RADIUS, LDAP and POP3. In this section we'll discuss the Passcode option. Web Redirection State : Default is IP (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or if you wish to assign a static IP address to the DAP-2662. When
  • D-Link DAP-2662 | Product Manual 2 - Page 52
    same subnet mask. Gateway : Enter the IP address of the gateway/router in your network. DNS : Enter a DNS server IP address. This is usually the local IP address of your gateway/router. Passcode Quantity: Enter the number of ticket that will be used here. Duration: Enter the duration value, in hours
  • D-Link DAP-2662 | Product Manual 2 - Page 53
    Password, Passcode, Remote RADIUS, LDAP and POP3. In this section we'll discuss the Remote RADIUS option. Web Redirection State : Default (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or if you wish to assign a static IP address to the DAP-2662. When
  • D-Link DAP-2662 | Product Manual 2 - Page 54
    subnet mask. Gateway : Enter the IP address of the gateway/router in your network. DNS : Enter a DNS server IP address. This is usually the local IP address of your gateway/router. Radius Server: Enter the RADIUS server's IP address here Radius Port: Enter the RADIUS server's port number here Radius
  • D-Link DAP-2662 | Product Manual 2 - Page 55
    Username/Password, Passcode, Remote RADIUS, LDAP and POP3. In this section we'll discuss the LDAP option. Web Redirection State : Default is Disable VLAN Group : Enter the VLAN Group ID here. Get IP From : Static IP (Manual) is chosen here. Choose this option if you do not have a DHCP server in
  • D-Link DAP-2662 | Product Manual 2 - Page 56
    in your network. DNS : Enter a DNS server IP address. This is usually the local IP address of your gateway/router. Server: Enter the LDAP server's IP address or Enter the LDAP server account's username here. Password: Enter the LDAP server account's password here. Base DN: Enter the administrator's
  • D-Link DAP-2662 | Product Manual 2 - Page 57
    Username/Password, Passcode, Remote RADIUS, LDAP and POP3. In this section we'll discuss the POP3 option. Web Redirection State : Default is IP (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or if you wish to assign a static IP address to the DAP-2662.
  • D-Link DAP-2662 | Product Manual 2 - Page 58
    same subnet mask. Gateway : Enter the IP address of the gateway/router in your network. DNS : Enter a DNS server IP address. This is usually the local IP address of your gateway/router. Server: Enter the POP3 server's IP address or domain name here. Port: Enter the POP server's port number here
  • D-Link DAP-2662 | Product Manual 2 - Page 59
    file that will From Local Hard Drive: be uploaded, will be displayed. Alternatively, the path can be manually entered here. Login Page Style List : Select the wireless band and login style that will be used in each SSID here. Click Download button to download
  • D-Link DAP-2662 | Product Manual 2 - Page 60
    Web User Interface MAC Bypass The DAP-2662 features a wireless MAC Bypass. Once a user is finished with these settings, click Save saved on the computer, and then click Upload. Load MAC File to Local To download MAC bypass list file, click Download Hard Driver: and to save the MAC bypass list. 60
  • D-Link DAP-2662 | Product Manual 2 - Page 61
    addresses automatically without the need to manually assign new IP addresses. Select Enable to allow the DAP-2662 to function as a DHCP address of the gateway on the network. WINS: Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that
  • D-Link DAP-2662 | Product Manual 2 - Page 62
    IP addresses automatically without the need to manually assign IP addresses. Select Enable to allow the DAP-2662 to function as a DHCP server. Gateway address for the wireless network. WINS: Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system
  • D-Link DAP-2662 | Product Manual 2 - Page 63
    Web User Interface Current IP Mapping List This window displays information about the current assigned DHCP dynamic and static IP address pools. This information is available when you enable DHCP server on the AP and assign dynamic and static IP address pools. Current DHCP Dynamic These are IP
  • D-Link DAP-2662 | Product Manual 2 - Page 64
    this list. Current Client This table displays information about all the current Information: connected stations. Upload ACL File: Upload the user's own ACL File here. Download ACL File: Download currenty ACL list to local hard drive. 64
  • D-Link DAP-2662 | Product Manual 2 - Page 65
    State: Click the drop-down menu to enable or disable the filter state. By default this feature is disabled. IP Address: Enter the IP address or network address. Subnet , and then click Upload. Download IP Filter File: To download IP Filter list file, click Download and to save the IP filter list. 65
  • D-Link DAP-2662 | Product Manual 2 - Page 66
    Partition. WLAN Partition Wireless Band: Displays the current wireless band. Link Integrity: Select Enable or Disable. If the Ethernet connection between the AP to be disassociated from the AP. Ethernet WLAN Access: The default is Enable. When disabled, all data from the Ethernet to associated
  • D-Link DAP-2662 | Product Manual 2 - Page 67
    Web User Interface Traffic Control Uplink/Downlink Setting The uplink/downlink setting allows users to customize the downlink and uplink interfaces including specifying downlink/uplink bandwidth rates in Mbits per second. These values are also used in the QoS and Traffic Manager windows. Once the
  • D-Link DAP-2662 | Product Manual 2 - Page 68
    Web User Interface QoS Quality of Service (QoS) enhances the experience of using a network by prioritizing the traffic of different applications. The DAP-2662 supports four priority levels. Once the desired QoS settings are finished, click the Save to have your changes take effect. Enable QoS: Check
  • D-Link DAP-2662 | Product Manual 2 - Page 69
    Web User Interface Traffic Manager The traffic manager feature allows users to create traffic management rules that specify how to deal with listed client traffic and specify downlink/ uplink speed for new traffic manager rules. Click the Save to have your changes take effect. Traffic Manager: Use
  • D-Link DAP-2662 | Product Manual 2 - Page 70
    Web User Interface Status In the Status Section the user can monitor and view configuration settings of the access point. Here the user can also view statistics about client information, WDS information and more. The following pages will explain settings found in the Status section in more detail.
  • D-Link DAP-2662 | Product Manual 2 - Page 71
    displays the current information like firmware version, Ethernet and wireless parameters, as well as the information regarding CPU and memory utilization. Device Information: This read-only window displays the configuration settings of the DAP-2662, including the firmware version and the device
  • D-Link DAP-2662 | Product Manual 2 - Page 72
    , MAC, band, authentication method, signal strength, RSSI, and power saving mode for the DAP-2662 network. Client Information: This window displays the wireless client information for clients currently connected to the DAP-2662. SSID: Displays the SSID of the client. MAC: Displays the MAC address of
  • D-Link DAP-2662 | Product Manual 2 - Page 73
    WDS Information Page This page displays the access points SSID, MAC, band, authentication method, signal strength, and status for the DAP-2662's Wireless Distribution System network. WDS Information: ThiswindowdisplaystheWirelessDistribution System information for clients currently connected to the
  • D-Link DAP-2662 | Product Manual 2 - Page 74
    Web User Interface Statistics Ethernet Traffic Statistics Displays wired interface network traffic information. Ethernet Traffic Statistics: This page displays transmitted and received count statistics for packets and bytes. 74
  • D-Link DAP-2662 | Product Manual 2 - Page 75
    Web User Interface WLAN Traffic Statistics Displays throughput, transmitted frame, received frame, and WEP frame error information for the AP network. WLAN Traffic Statistics: This page displays wireless network statistics for data throughput, transmitted and received frames, and frame errors. 75
  • D-Link DAP-2662 | Product Manual 2 - Page 76
    View Log The AP's embedded memory holds logs here. The log information includes but is not limited to the following items: cold start AP, upgrading firmware, client associate and disassociate with AP, and web login. The web page holds up to 500 logs. View Log: The AP's embedded memory displays
  • D-Link DAP-2662 | Product Manual 2 - Page 77
    email server address. SMTP Port: Enter the SMTP port. User Name: Enter the name of the new user entry. Password: Enter the password set for the email notification. Confirm Password: Retype the password entry to confirm the password. Schedule: Click the drop-down menu to set email log schedule. 77
  • D-Link DAP-2662 | Product Manual 2 - Page 78
    Web User Interface Maintenance Section In the Status Section the user can monitor and view configuration settings of the access point. Here the user can also view statistics about client information, WDS information and more. The following pages will explain settings found in the maintenance section
  • D-Link DAP-2662 | Product Manual 2 - Page 79
    Web User Interface Administration Limit Administrator Check one or more of the five main categories to display the various hidden administrator parameters and settings displayed on the next five pages. Each of the nine main categories display various hidden administrator parameters and settings.
  • D-Link DAP-2662 | Product Manual 2 - Page 80
    parameters and settings. System Name: The name of the device. The default name is D-Link DAP-2662. Location: The physical location of the device, e.g. 72nd Floor, D-Link HQ. MDNS Name: Enter the name of the multicast DNS. The default name is dap2662. Login Settings Each of the five main categories
  • D-Link DAP-2662 | Product Manual 2 - Page 81
    1 Min, 3 Mins, 5 Mins, 10 Mins, 15 Mins or Never. Ping Control Settings Choose to enable or disable ping function. Enable: Click to disable. (By default it is enabled.) LED Settings Choose to enable or disable LED status. LED Status: Choose corresponding radio button to enable or disable LED Status
  • D-Link DAP-2662 | Product Manual 2 - Page 82
    Web User Interface DDP Settings Choose to enable or disable DDP. Status: Click to disable. (By default it is enabled.) Nuclias Connect Settings Choose to enable or disable Nuclias Connect. Enable Nuclias Connect: Choose from drop down list to enable or disable Nuclias Connect. 82
  • D-Link DAP-2662 | Product Manual 2 - Page 83
    to this product. Please go to your local D-Link website to see if there is a newer version of the firmware available. Upload Firmware from Local Hard Drive: The current firmware version is displayed above the file location field. After the latest firmware is downloaded, click on the "Choose File
  • D-Link DAP-2662 | Product Manual 2 - Page 84
    Open" and "Upload" to update the configuration. Download Configuration File: Click "Download" to save the current configuration file to your local disk. Note that if you save one configuration file with the administrator's password now, after resetting your DAP-2662 and then updating to this saved
  • D-Link DAP-2662 | Product Manual 2 - Page 85
    Saving Saving: Time. Daylight Saving Use the drop-down menu to select the Dates: correct Daylight Saving offset. Set the Date and Time Manually: A user can either manually set the time for the AP here, or click the Copy Your Computer's Time Settings button to copy the time from the computer in
  • D-Link DAP-2662 | Product Manual 2 - Page 86
    from the access point's web configuration. Help allows the user to read more about the given options to configure without the need to consult the manual. The following pages will explain settings found in the configuration and system section in more detail. 86
  • D-Link DAP-2662 | Product Manual 2 - Page 87
    of the access point or clear the added language pack. Restart the Device: Click Restart to restart the DAP-2662. Restore to Factory Default Click Restore to restore the DAP-2662 Settings: back to factory default settings. Clear Language Pack: Click to clear the current Language pack running. 87
  • D-Link DAP-2662 | Product Manual 2 - Page 88
    Web User Interface Help The help page is useful to view a brief description of a function available on the access point in case the manual is not present. Help: Scroll down the Help page for topics and explanations. 88
  • D-Link DAP-2662 | Product Manual 2 - Page 89
    , business or public access wireless networks. D-Link wireless products provides you with access to the adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards, conventional Ethernet network devices. The DAP-2662 saves money by providing users with
  • D-Link DAP-2662 | Product Manual 2 - Page 90
    Knowledge Base Wireless Installation Considerations The D-Link Access Point lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however,
  • D-Link DAP-2662 | Product Manual 2 - Page 91
    Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DAP-2662. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows® XP. If you have a different operating system,
  • D-Link DAP-2662 | Product Manual 2 - Page 92
    Troubleshooting How to check your IP address? After you install your network adapter, by default, the TCP/IP settings should and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security
  • D-Link DAP-2662 | Product Manual 2 - Page 93
    Troubleshooting How > Manage network connections Step 2: Right-click on the Local Area Connection which represents your network adapter and select Properties. sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).
  • D-Link DAP-2662 | Product Manual 2 - Page 94
    Technical Specifications Standards • IEEE 802.11ac • IEEE 802.11n • IEEE 802.11g • IEEE 802.11a • IEEE 802.3b • IEEE 802.3u • IEEE 802.3ab • IEEE 802.3az • IEEE 802.3af Technical Specifications LEDs • Power/Status Temperature • Operating: 0˚C to 40˚C • Storing: -20˚C to 65˚C Humidity • Operating:
  • D-Link DAP-2662 | Product Manual 2 - Page 95
    Antenna Pattern Maximum Power Consumption Temperature Humidity Certi cations Antenna Patterns Orientation 2.4 GHz Ceiling Mounted Z Y • 11 Watts • Operating: 0 to 40 °C (32 to 104 °F) • Storage: -20 to 65 °C (-4 to 149 °F) • Operating: 10% to 90% non-condensing • Storage: 5% to 95% non-
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
NUCLIAS CONNECT
DAP-2662 User Guide
V 1.00
2019
|
Business Class Networking