D-Link DAP-2680 User Manual

D-Link DAP-2680 Manual

Get D-Link DAP-2680 PDF manuals and user guides View all D-Link DAP-2680 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DAP-2680 manual content summary:

  • D-Link DAP-2680 | User Manual - Page 1
    Document Created by Nick Schuster
  • D-Link DAP-2680 | User Manual - Page 2
    Authentication Settings- Username/Password...48 Authentication Settings- Passcode 50 Authentication Settings- Remote RADIUS............52 Authentication Settings- LDAP 54 Authentication Settings- POP3 56 Login Page Upload 58 IP Filter Settings 59 MAC Bypass 60 D-Link DAP-2680 User Manual 2
  • D-Link DAP-2680 | User Manual - Page 3
    Troubleshooting 90 Why can't I access the web-based configuration utility 90 What can I do if I forgot my password 90 How to check your IP address 91 How to statically assign an IP address 92 Technical Specifications 93 Antenna Pattern 94 Central WiFiManager 96 D-Link DAP-2680 User Manual
  • D-Link DAP-2680 | User Manual - Page 4
    building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. **Only compliant with 802.3at PoE switch and 802.3af standard can't supply sufficient power for DAP-2680 D-Link DAP-2680 User Manual 4
  • D-Link DAP-2680 | User Manual - Page 5
    the regulations of individual countries and jurisdictions. The DAP-2680 isn't supported in the 5.25~5.35GHz and 5.47 ~ 5.725GHz frequency ranges in some regions. ***Only compliant with 802.3at PoE switch and 802.3af standard can't supply sufficient power for DAP-2680 D-Link DAP-2680 User Manual 5
  • D-Link DAP-2680 | User Manual - Page 6
    or the D-Link DPE-301GI PoE injector. System Requirements yy Computers with Windows®, Macintosh®, or Linux-based operating systems with an installed Ethernet Adapter yy Internet Explorer 11, Safari 7, Firefox 28, or Google Chrome 33 and Above (for configuration) D-Link DAP-2680 User Manual 6
  • D-Link DAP-2680 | User Manual - Page 7
    Green Indicates that the DAP-2680 is working properly. 2 Power Receptor Connect the supplied power adapter. Power Receptor (*Note no longer used, replaced by PoE) 3 LAN (PoE) Port Connect to a Power over Ethernet (PoE) switch or router via an Ethernet cable. D-Link DAP-2680 User Manual 7
  • D-Link DAP-2680 | User Manual - Page 8
    .168.0.0/24 subnet. Launch a web browser, type the default IP address of the access point (http://192.168.0.50) and then press Enter. Log in to the Administration Web pages. The default login information is: Username: admin Password: (Leave the password field blank) D-Link DAP-2680 User Manual 8
  • D-Link DAP-2680 | User Manual - Page 9
    the access point (Default setting is http://192.168.0.50 or https://192.168.0.50) and then press Enter to login. Most of the configurable settings are located in the left menu of the web GUI which contains section called Basic Settings, Advanced Settings and Status. D-Link DAP-2680 User Manual 9
  • D-Link DAP-2680 | User Manual - Page 10
    when enabled automatically selects the channel that provides the best wireless performance. The channel selection process only occurs when the AP is booting up. To manually select a channel, set this option to Disable and select a channel from the drop-down menu. D-Link DAP-2680 User Manual 10
  • D-Link DAP-2680 | User Manual - Page 11
    -Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. • Select WPA-Enterprise to secure your network with the inclusion of a RADIUS server. • Select 802.1X if your network is using port-based Network Access Control. D-Link DAP-2680 User Manual 11
  • D-Link DAP-2680 | User Manual - Page 12
    ): Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID's factory default setting wireless clients. Auto 20/40 MHz allows you to connect to both 802.11n and 802.11b/g or 802.11a wireless devices on your network. D-Link DAP-2680 User Manual
  • D-Link DAP-2680 | User Manual - Page 13
    devices that share the same WEP settings. If multi-SSID is enabled, this option is not available. • Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-2680 User Manual 13
  • D-Link DAP-2680 | User Manual - Page 14
    - Configuration WDS Mode Wireless Band: Select either 2.4GHz or 5GHz from the drop-down menu. Mode: WDS is selected from the drop-down menu. Network Name (SSID): Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID's factory default setting
  • D-Link DAP-2680 | User Manual - Page 15
    Section 3 - Configuration Site Survey: Click on the Scan button to search for available wireless networks, then click on the available network that . • Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-2680 User Manual 15
  • D-Link DAP-2680 | User Manual - Page 16
    : Use the drop-down menu to choose 20 MHz or Auto 20/40 MHz. Site Survey: Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with. Authentication: Will be explained in the next topic. D-Link DAP-2680 User Manual 16
  • D-Link DAP-2680 | User Manual - Page 17
    message back to the wireless client. If the key does not match the one configured on the access point, the access point will deny the connection request from the wireless client. Shared Key will that represents English letters using numbers ranging from 0-127. D-Link DAP-2680 User Manual 17
  • D-Link DAP-2680 | User Manual - Page 18
    Configuration WEP. WPA-EAP is the highest level of wireless security a user can use for wireless today. WPA2 is an upgrade of WPA. WPA2 default value of 1800 is recommended. Pass Phrase: When you select WPA-Personal, please enter a Pass Phrase in the corresponding field. D-Link DAP-2680 User Manual
  • D-Link DAP-2680 | User Manual - Page 19
    Section 3 - Configuration WPA Mode: When WPA-Enterprise is selected, you must also select a WPA Microsoft Network Access Protection. RADIUS Server: Enter the IP address of the RADIUS server. RADIUS Port: Enter the RADIUS port. RADIUS Secret: Enter the RADIUS secret. D-Link DAP-2680 User Manual 19
  • D-Link DAP-2680 | User Manual - Page 20
    Mask: Enter the subnet mask. All devices in the network must share the same subnet mask. Default Gateway: Enter the IP address of the gateway/router in your network. DNS: Enter a DNS server IP address. This is usually the local IP address of your gateway/router. D-Link DAP-2680 User Manual 20
  • D-Link DAP-2680 | User Manual - Page 21
    address manually. When Auto is selected, the other fields here will be grayed out. IP Address: Enter the LAN IPv6 address used here. Prefix: Enter the LAN subnet prefix length value used here. Default Gateway: Enter the LAN default gateway IPv6 address used here. D-Link DAP-2680 User Manual 21
  • D-Link DAP-2680 | User Manual - Page 22
    can configure advanced settings concerning Performance, Multiple SSID, VLAN, Security, Quality of Service, AP Array, Web Redirection, DHCP Server, Filters and Scheduling. The following pages will explain settings found in the Advanced Settings section in more detail. D-Link DAP-2680 User Manual 22
  • D-Link DAP-2680 | User Manual - Page 23
    a wireless client connect to an access point faster. DTM Interval (1-15): Select a Delivery Traffic Indication Message setting between 1 and 15. 1 is the default setting. DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. D-Link DAP-2680 User
  • D-Link DAP-2680 | User Manual - Page 24
    wireless network's channel over-lapping and causing interference, the Access Point will automatically change to 20MHz. Transfer DHCP Offer to Enable to transfer the DHCP Offer to Unicast from LAN toWLAN, suggest to enable this function if stations number is larger than 30. Unicast : D-Link DAP-2680
  • D-Link DAP-2680 | User Manual - Page 25
    enabled and when the number of users exceeds this value, or the network utilization of this AP exceeds the percentage that has been specified, the DAP-2680 will not allow clients to associate with the AP. D-Link DAP-2680 User Manual 25
  • D-Link DAP-2680 | User Manual - Page 26
    the wireless clients. ACL RSSI: Use the drop-down menu to Enable the function. When enabled, the device denies the connection request from the wireless clients with the RSSI lower than the specified threshold below. ACL RSSI Threshold: Set the ACL RSSI Threshold. D-Link DAP-2680 User Manual 26
  • D-Link DAP-2680 | User Manual - Page 27
    Configuration Multi-SSID The device supports up to four multiple Service Set Identifiers. You can set the Primary SSID in the Basic > Wireless section. The SSID's factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless . D-Link DAP-2680 User Manual 27
  • D-Link DAP-2680 | User Manual - Page 28
    which the group key will be valid. The default value of 1800 seconds is recommended. Pass Phrase: IP address of the RADIUS server. In addition, you must configure RADIUS Port and RADIUS Secret. RADIUS Port: Enter the RADIUS port. RADIUS Secret: Enter the RADIUS secret. D-Link DAP-2680 User Manual
  • D-Link DAP-2680 | User Manual - Page 29
    have a VLAN tag inserted with a PVID. The VLAN List tab displays the current VLANs. VLAN Status: Use the radio button to toggle to Enable. Next, go to the Add/Edit VLAN tab to add or modify an item on the VLAN List tab. VLAN Mode: The current VLAN mode is displayed. D-Link DAP-2680 User Manual 29
  • D-Link DAP-2680 | User Manual - Page 30
    modify an item on the VLAN List tab. Port Name: The name of the port is displayed in this column. Tag VID: The Tagged VID is displayed in this column. Untag VID: The Untagged VID is displayed in this column. PVID: The Port VLAN Identifier is displayed in this column. D-Link DAP-2680 User Manual 30
  • D-Link DAP-2680 | User Manual - Page 31
    to configure VLANs. Once you have made the desired changes, click the Save button to let your changes take effect. VLAN Status: Use the radio button to toggle to Enable. VLAN ID: Provide a number between 1 and 4094 for the Internal VLAN. VLAN Name: Enter the VLAN to add or modify. D-Link DAP-2680
  • D-Link DAP-2680 | User Manual - Page 32
    as to configure various types of PVID settings. Click the Save button to let your changes take effect. VLAN Status: Use the radio button to toggle between Enable and Disable. PVID Auto Assign Status: Use the radio button to toggle PVID auto assign status to Enable. D-Link DAP-2680 User Manual 32
  • D-Link DAP-2680 | User Manual - Page 33
    as All, Valid, Neighborhood, Rogue, and New. Click the Save button to let your changes take effect. Wireless Band: Select 2.4GHz or 5GHz. AP List: The choices include All, Valid, Neighbor, Rogue, and New. Detect: Click this button to initiate a scan of the network. D-Link DAP-2680 User Manual 33
  • D-Link DAP-2680 | User Manual - Page 34
    3 - Configuration Schedule The Wireless Schedule Settings window is used to add and modify scheduling rules on the device. Click the Save button to let your changes take effect. Wireless Schedule: Use Time: Enter the ending hour and minute, using a 24-hour clock. D-Link DAP-2680 User Manual 34
  • D-Link DAP-2680 | User Manual - Page 35
    internal RADIUS server. Password: Enter a password to authenticate user access to the internal RADIUS server. The length of your password should be 8~64. Status: Toggle the drop-down menu between Enable and Disable. RADIUS Account List: Displays the list of users. D-Link DAP-2680 User Manual 35
  • D-Link DAP-2680 | User Manual - Page 36
    users to add IP/MAC address mapping to prevent arp spoofing attack. ARP Spoofing Prevention: This check box allows you to enable the arp spoofing prevention function. Gateway IP Address: Enter a gateway IP address. Gateway MAC Address: Enter a gateway MAC address. D-Link DAP-2680 User Manual 36
  • D-Link DAP-2680 | User Manual - Page 37
    Section 3 - Configuration Bandwidth Optimization The Bandwidth Optimization window allows the user to manage the bandwidth of the device and arrange the bandwidth for various wireless clients. When different BW for 1a/b/g/n stations, and Allocte specific BW for SSID. D-Link DAP-2680 User Manual 37
  • D-Link DAP-2680 | User Manual - Page 38
    to select the SSID for the specified wireless band. Downlink Speed: Enter the limitation of the downloading speed in either Kbits/sec or Mbits/sec for the rule. Uplink Speed: Enter the limitation of the uploading speed in either Kbits/sec or Mbits/sec for the rule. D-Link DAP-2680 User Manual 38
  • D-Link DAP-2680 | User Manual - Page 39
    the current AP array status for the following parameters: Array Name, Master IP, MAC, Master, Backup Master, Slave, and Total. Current Members: This table displays all the current array members. The DAP-2680 AP array feature supports up to eight AP array members. D-Link DAP-2680 User Manual 39
  • D-Link DAP-2680 | User Manual - Page 40
    configure Configuration: feature here. Wireless Basic Select this option to specify the basic wireless Settings: settings that the APs in the group will inherit. Wireless Advanced Select this option to specify the advanced wireless the APs in the group will inherit. D-Link DAP-2680 User Manual 40
  • D-Link DAP-2680 | User Manual - Page 41
    Section 3 - Configuration Wireless Basic Settings Network Name (SSID): Select this option to use the same SSID. SSID ): Ack Time Out: Select this option to use the same ACK timeout value. Wireless ACL: Select this option to use the same wireless ACL settings. D-Link DAP-2680 User Manual 41
  • D-Link DAP-2680 | User Manual - Page 42
    captive profile settings. VLAN: Select this option to use the same VLAN settings. Advanced Functions Service settings. Log Settings: Select this option to use the same log settings. Time and Date Settings: Select this option to use the same time and date settings. D-Link DAP-2680 User Manual
  • D-Link DAP-2680 | User Manual - Page 43
    Section 3 - Configuration ARP Spoofing Select this option to use the same ARP spoofing prevention settings. Prevention: Bandwidth Select this option the same limit administrator settings. Ping Control Setting: Select this option to use the same ping control settings. D-Link DAP-2680 User Manual 43
  • D-Link DAP-2680 | User Manual - Page 44
    Auto-RF In this windows, users can view and configure the automatic radio frequency settings as well as configure the the auto-initiate period and threshold values. Click the Save button to 10% to 100%. RF Report Frequency: Enter the RF report frequency value here. D-Link DAP-2680 User Manual 44
  • D-Link DAP-2680 | User Manual - Page 45
    window, users can view and configure the AP array's load balancing settings. Click the Save button to accept the changes made. Enable Load Balance: Select to Enable or Disable the load balance feature here. Active Threshold: Enter the active threshold value here. D-Link DAP-2680 User Manual 45
  • D-Link DAP-2680 | User Manual - Page 46
    the URL of the website that will be used in the space provided. IPIF Status : Select to Enable or Disable the Captive Portal with its IP interface feature here. VLAN Group : Enter the VLAN Group ID here. D-Link DAP-2680 User Manual 46
  • D-Link DAP-2680 | User Manual - Page 47
    Subnet Mask : Enter the subnet mask. All devices in the network must share the same subnet mask. Gateway : Enter the IP address of the gateway/router in your network. DNS : Enter a DNS server IP address. This is usually the local IP address of your gateway/router. D-Link DAP-2680 User Manual 47
  • D-Link DAP-2680 | User Manual - Page 48
    the URL of the website that will be used in the space provided. IPIF Status : Select to Enable or Disable the Captive Portal with its IP interface feature here. VLAN Group : Enter the VLAN Group ID here. D-Link DAP-2680 User Manual 48
  • D-Link DAP-2680 | User Manual - Page 49
    the IP address of the gateway/router in your network. DNS : Enter a DNS server IP address. This is usually the local IP address of your gateway/router. Username: Enter the username for the new account here. Password: Enter the password for the new account here. D-Link DAP-2680 User Manual 49
  • D-Link DAP-2680 | User Manual - Page 50
    the URL of the website that will be used in the space provided. IPIF Status : Select to Enable or Disable the Captive Portal with its IP interface feature here. VLAN Group : Enter the VLAN Group ID here. D-Link DAP-2680 User Manual 50
  • D-Link DAP-2680 | User Manual - Page 51
    Section 3 - Configuration Get IP From : Static IP (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or if you wish to assign a static IP address to the DAP-2680. When Dynamic IP (DHCP) is selected, the other fields here will be grayed out. Please allow
  • D-Link DAP-2680 | User Manual - Page 52
    the URL of the website that will be used in the space provided. IPIF Status : Select to Enable or Disable the Captive Portal with its IP interface feature here. VLAN Group : Enter the VLAN Group ID here. D-Link DAP-2680 User Manual 52
  • D-Link DAP-2680 | User Manual - Page 53
    Section 3 - Configuration Get IP From : Static IP (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or if you wish to assign a static IP address to the DAP-2680. When Dynamic IP (DHCP) is selected, the other fields here will be grayed out. Please allow
  • D-Link DAP-2680 | User Manual - Page 54
    a DHCP server in your network, or if you wish to assign a static IP address to the DAP2680. When Dynamic IP (DHCP) is selected, the other fields here will be grayed out. Please allow about 2 minutes for the DHCP client to be functional once this selection is made. D-Link DAP-2680 User Manual 54
  • D-Link DAP-2680 | User Manual - Page 55
    IP address of the gateway/router in your network. DNS : Enter a DNS server IP address. This is usually the local IP address of your gateway/router. Server: Enter the LDAP server's IP account's username here. Password: Enter the LDAP server account's password here. Base DN Link DAP-2680 User Manual 55
  • D-Link DAP-2680 | User Manual - Page 56
    the URL of the website that will be used in the space provided. IPIF Status : Select to Enable or Disable the Captive Portal with its IP interface feature here. VLAN Group : Enter the VLAN Group ID here. D-Link DAP-2680 User Manual 56
  • D-Link DAP-2680 | User Manual - Page 57
    is usually the local IP address of your gateway/router. Server: Enter the POP3 server's IP address or domain name here. Port: Port: Enter the POP server's port number here. Connection Type: Select the connection type here. Options to choose from are None and SSL/TLS. D-Link DAP-2680 User Manual 57
  • D-Link DAP-2680 | User Manual - Page 58
    , the path can be manually entered here. Login Page Style List : Select the wireless band and login style that will be used in each SSID here. Click Download button to download the template file for login page and Click Del button to delete the template file. D-Link DAP-2680 User Manual 58
  • D-Link DAP-2680 | User Manual - Page 59
    File: To upload a IP filter list file, click Browse and navigate to the IP filter list file saved on the computer, and then click Upload. Download IP Filter File: Download IP Filter File: To download IP Filter list file, click Download and to save the IP Filter list. D-Link DAP-2680 User Manual 59
  • D-Link DAP-2680 | User Manual - Page 60
    bypass list file, click Browse and navigate to the MAC bypass list file saved on the computer, and then click Upload. Load MAC File to Local To download MAC bypass list file, click Download Hard Driver: and to save the MAC bypass list. D-Link DAP-2680 User Manual 60
  • D-Link DAP-2680 | User Manual - Page 61
    Host Configuration Protocol (DHCP) assigns dynamic IP addresses to devices on the network. This protocol simplifies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign new IP addresses. Select Enable to allow the DAP-2680 to
  • D-Link DAP-2680 | User Manual - Page 62
    for the wireless network. WINS is a system that determines the IP address of a network computer with a dynamically assigned IP address, if applicable. DNS: Enter the DNS server address for your wireless network. Domain Name: Specify the domain name for the network. D-Link DAP-2680 User Manual 62
  • D-Link DAP-2680 | User Manual - Page 63
    DHCP-assigned static IP address of the device. Binding MAC Address: The MAC address of a device on the network that is assigned an IP address from the DHCP dynamic pool. Assigned IP Address: The current corresponding DHCP-assigned static IP address of the device. D-Link DAP-2680 User Manual 63
  • D-Link DAP-2680 | User Manual - Page 64
    This page allows the user to configure Wireless MAC ACL settings for access control. Wireless Band: Displays the current wireless band rate. Access Control List: . Load MAC File to Local To download ACL list fle, click Download Hard Driver: and to save the ACL list. D-Link DAP-2680 User Manual 64
  • D-Link DAP-2680 | User Manual - Page 65
    : ThedefaultvalueisEnable,whichallowsstations to intercommunicate by connecting to a target AP. When disabled, wireless stations cannot exchange data on the same Multi-SSID. In Guest mode, wireless stations cannot exchange data with any station on your network. D-Link DAP-2680 User Manual 65
  • D-Link DAP-2680 | User Manual - Page 66
    Section 3 - Configuration Traffic Control Uplink/Downlink Setting The uplink/downlink setting allows users to customize the downlink and uplink : The downlink bandwidth in Mbits per second. Uplink Bandwidth: Uplink Bandwidth: The uplink bandwidth in Mbits per second. D-Link DAP-2680 User Manual 66
  • D-Link DAP-2680 | User Manual - Page 67
    Section 3 - Configuration QoS Quality of Service (QoS) enhances the experience of using a network by prioritizing the traffic of different applications. The DAP-2680 supports four priority levels. Once the . This value is entered in the Uplink/Downlink Setting window. D-Link DAP-2680 User Manual 67
  • D-Link DAP-2680 | User Manual - Page 68
    Section 3 - Configuration Traffic Manager The traffic manager feature allows users to create traffic management rules that specify how to deal with Uplink Bandwidth:The uplink bandwidth in Mbits per second. This value is entered in the Uplink/Downlink Setting window. D-Link DAP-2680 User Manual 68
  • D-Link DAP-2680 | User Manual - Page 69
    Status Section the user can monitor and view configuration settings of the access point. Here the user can also view statistics about client information, WDS information and more. The following pages will explain settings found in the Status section in more detail. D-Link DAP-2680 User Manual 69
  • D-Link DAP-2680 | User Manual - Page 70
    version, Ethernet and wireless parameters, as well as the information regarding CPU and memory utilization. Device Information: This read-only window displays the configuration settings of the DAP-2680, including the firmware version and the device's MAC address. D-Link DAP-2680 User Manual 70
  • D-Link DAP-2680 | User Manual - Page 71
    address of the client. Band: Displays the wireless band that the client is connected to. Authentication: Displays the type of authentication being used. RSSI: Displays the client's signal strength. Power Saving Mode: Displays the status of the power saving feature. D-Link DAP-2680 User Manual 71
  • D-Link DAP-2680 | User Manual - Page 72
    Section 3 - Configuration WDS Information Page This page displays the access points SSID, MAC, band, authentication method, signal strength, and status for the DAP-2680's Wireless Distribution System network. WDS Information: ThiswindowdisplaystheWirelessDistribution System information for clients
  • D-Link DAP-2680 | User Manual - Page 73
    Section 3 - Configuration Channel Analyze Wireless Band: Select either 2.4Ghz or 5GHz. Detect: Click the Detect button to scan. AP List: This will list the transmitting channels and quality. D-Link DAP-2680 User Manual 73
  • D-Link DAP-2680 | User Manual - Page 74
    Section 3 - Configuration Stats Page Ethernet Traffic Statistics Displays wired interface network traffic information. Ethernet Traffic Statistics: This page displays transmitted and received count statistics for packets and bytes. D-Link DAP-2680 User Manual 74
  • D-Link DAP-2680 | User Manual - Page 75
    Statistics Displays throughput, transmitted frame, received frame, and WEP frame error information for the AP network. WLAN Traffic Statistics: This page displays wireless network statistics for data throughput, transmitted and received frames, and frame errors. D-Link DAP-2680 User Manual 75
  • D-Link DAP-2680 | User Manual - Page 76
    Section 3 - Configuration Log View Log The AP's embedded memory holds logs here. The log information includes but is not limited to the following AP, upgrading firmware, client associate and disassociate with AP, and web login. The web page holds up to 500 logs. D-Link DAP-2680 User Manual 76
  • D-Link DAP-2680 | User Manual - Page 77
    : System Activity, Wireless Activity, and Notice. Support Simple Mail Transfer Protocol for log schedule and periodical change key. It can not support Gmail SMTP port 465. Please set to Gmail SMTP port 25 or 587. Use the drop-down menu to set the e-mail log schedule. D-Link DAP-2680 User Manual 77
  • D-Link DAP-2680 | User Manual - Page 78
    Section the user can monitor and view configuration settings of the access point. Here the user can also view statistics about client information, WDS information and more. The following pages will explain settings found in the maintenance section in more detail. D-Link DAP-2680 User Manual 78
  • D-Link DAP-2680 | User Manual - Page 79
    specific VLAN ID that the administrator will be allowed to log in from. Limit Administrator IP: Check to enable the Limit Administrator IP address. IP Range: Enter the IP address range that the administrator will be allowed to log in from and then click the Add button. D-Link DAP-2680 User Manual
  • D-Link DAP-2680 | User Manual - Page 80
    Section 3 - Configuration System Name Settings Each of the eight main categories display various hidden administrator parameters and settings. System Name: The name of the device. The default name is D-Link DAP-2680. Location: The physical location of the device, e.g. 72nd Floor, D-Link HQ. Login
  • D-Link DAP-2680 | User Manual - Page 81
    Configuration SNMP Settings Each of the eight main categories display various hidden administrator parameters and settings. Status: Check the box to enable the SNMP functions. This is disabled by default by default. Trap Server IP : Enter the Trap sever IP address. Link DAP-2680 User Manual 81
  • D-Link DAP-2680 | User Manual - Page 82
    Section 3 - Configuration Firmware and SSL Upload This page allows the user to Local Hard Drive: After you have downloaded a SSL certification to your local drive, click "Choose File." Select the certification and click "Open" and "Upload" to complete the upgrade. D-Link DAP-2680 User Manual
  • D-Link DAP-2680 | User Manual - Page 83
    administrator's password now, after resetting your DAP-2680 and then updating to this saved configuration file, the password will be gone. Upload CWM File : Browse to the saved CWM file you have in local drive and click "Open" and "Upload" to upload the CWM file . D-Link DAP-2680 User Manual 83
  • D-Link DAP-2680 | User Manual - Page 84
    Saving Saving: Time. Set the Date and Time Manually: A user can either manually set the time for the AP here, or click the Copy Your Computer's Time Settings button to copy the time from the computer in use (Make sure that the computer's time is set correctly). D-Link DAP-2680 User Manual 84
  • D-Link DAP-2680 | User Manual - Page 85
    log out from the access point's web configuration. Help allows the user to read more about the given options to configure without the need to consult the manual. The following pages will explain settings found in the configuration and system section in more detail. D-Link DAP-2680 User Manual 85
  • D-Link DAP-2680 | User Manual - Page 86
    the added language pack. Restart the Device: Click Restart to restart the DAP-2680. Restore to Factory Default Click Restore to restore the DAP-2680 Settings: back to factory default settings. Clear Language Pack: Click to clear the current Language pack running. D-Link DAP-2680 User Manual 86
  • D-Link DAP-2680 | User Manual - Page 87
    Section 3 - Configuration Help The help page is useful to view a brief description of a function available on the access point in case the manual is not present. Help: Scroll down the Help page for topics and explanations. D-Link DAP-2680 User Manual 87
  • D-Link DAP-2680 | User Manual - Page 88
    . • Scalability - Configurations can be easily changed and range from Peer-to-Peer networks, suitable for a small number of users to larger Infrastructure networks to accommodate hundreds or thousands of users, depending on the number of wireless devices deployed. D-Link DAP-2680 User Manual 88
  • D-Link DAP-2680 | User Manual - Page 89
    fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DAP-2680 User Manual 89
  • D-Link DAP-2680 | User Manual - Page 90
    10 seconds. Release the button and the access point will go through its reboot process. Wait about 30 seconds to access the access point. The default IP address is 192.168.0.50. When logging in, the username is admin and leave the password box empty. D-Link DAP-2680 User Manual 90
  • D-Link DAP-2680 | User Manual - Page 91
    . Some firewall software programs may block a DHCP request on newly installed adapters. If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network settings. D-Link DAP-2680 User Manual 91
  • D-Link DAP-2680 | User Manual - Page 92
    Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5: Click OK twice to save your settings. D-Link DAP-2680 User
  • D-Link DAP-2680 | User Manual - Page 93
    HTTPS)) • Center WiFiManager • SNMP Support • Command Line Interface (Telnet, Wireless Frequency Range • 2.4 to 2.4835 GHz and 5.15 to 5.85 GHz** Operating Voltage • 12V/2A or 802.3at PoE Antenna Type • Three Dual Dand Internal Antennas (2.4Ghz 3.6dBi & 5Ghz 4.2dBi) D-Link DAP-2680 User Manual
  • D-Link DAP-2680 | User Manual - Page 94
    Appendix D - Antenna Pattern Antenna Pattern Orientation 2.4GHz Ceiling Mounted Antenna Pattern H-Plane E-Plane 2.4GHz Wall Mounted D-Link DAP-2680 User Manual 94
  • D-Link DAP-2680 | User Manual - Page 95
    Appendix D - Antenna Pattern Antenna Pattern Orientation 5GHz Ceiling Mounted H-Plane E-Plane 5GHz Wall Mounted D-Link DAP-2680 User Manual 95
  • D-Link DAP-2680 | User Manual - Page 96
    COM/WIFIDOWNLOAD With the easy-to-use web-based interface you can... • Configure once and apply to multiple Access Points • Install on Windows PC • Access entire wireless network in real time1 • Access detailed reports • Optimise your bandwidth FREE Central WiFiManager User Interface Supports
  • D-Link DAP-2680 | User Manual - Page 97
    WiFiManager Available on the following products2: DAP-2695 Wireless AC1750 Indoor Access Point Designed to support small to medium business or enterprise environments. Secure, manageable dual-band wireless LAN options. DAP-2660 Wireless AC1200 Indoor Ceiling Access Point Providing enhanced
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
Document Created by Nick Schuster