D-Link DAP-2682 Quick Install Guide
D-Link DAP-2682 Manual
 |
View all D-Link DAP-2682 manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DAP-2682 manual content summary:
- D-Link DAP-2682 | Quick Install Guide - Page 1
Quick Installation Guide Nuclias Connect AC2300 Wave 2 Access Point DAP-2682 Additional documentation is also available on the D-Link website - D-Link DAP-2682 | Quick Install Guide - Page 2
Contents English 1 - D-Link DAP-2682 | Quick Install Guide - Page 3
You Begin System Requirements This installation guide provides instructions for installing the DAP-2682 on your network. Additional documentation is also available on the D-Link support website. • Nuclias Connect Manual: For additional information and instructions on how to configure the device - D-Link DAP-2682 | Quick Install Guide - Page 4
Manual for detailed configuration instructions. Manual Configuration Note: D-Link recommends manually configuring the device before mounting it. The management computer, DHCP server and DAP-2682 default login information is Username: admin Password: admin 2 DAP-2682 Quick Installation Guide - D-Link DAP-2682 | Quick Install Guide - Page 5
Mounting Mounting on a Solid Wall or Ceiling Figure 4: Mounting the Device 5. Rotate the DAP-2682 into the grooves on the mounting plate to secure it to the plate. Mounting with the Ceiling Brackets 1. Clip the two ceiling brackets onto a ceiling crossbar. DAP-2682 Quick Installation Guide 3 - D-Link DAP-2682 | Quick Install Guide - Page 6
device. Note: If you are powering the device with a power adapter, plug the adapter into the Power Input port. Figure 7: Mounting the Device 4. Rotate the DAP-2682 into the grooves on the mounting plate to secure it to the plate. 4 DAP-2682 Quick Installation Guide - D-Link DAP-2682 | Quick Install Guide - Page 7
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - D-Link DAP-2682 | Quick Install Guide - Page 8
RF Frequency Requirements This device is for indoor use only when using all channels in the 5.15 to 5.25 GHz frequency range. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this - D-Link DAP-2682 | Quick Install Guide - Page 9
, it may cause radio interference. Install and use the equipment according to the instruction manual. 5GHz Product and Warranty Information To find out more about D-Link Nuclias product or www.dlink.com/warranty VCCI-B For UNII產品(5GHz WLAN/WIFI 1 TECHNICAL SUPPORT dlink.com - D-Link DAP-2682 | Quick Install Guide - Page 10
Notes - D-Link DAP-2682 | Quick Install Guide - Page 11
Notes - D-Link DAP-2682 | Quick Install Guide - Page 12
- D-Link DAP-2682 | Quick Install Guide - Page 13
Ver. 1.00(WW)_130x183 2020/03/20
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
 |
 |
Additional documentation is also available on the D-Link website
DAP-2682
Quick Installation Guide
Nuclias Connect AC2300 Wave 2 Access Point