D-Link DAP-3520 Product Manual

D-Link DAP-3520 - AirPremier N Dual Band Exterior PoE Access Point Manual

Get D-Link DAP-3520 - AirPremier N Dual Band Exterior PoE Access Point PDF manuals and user guides
UPC - 790069320477
View all D-Link DAP-3520 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DAP-3520 manual content summary:

  • D-Link DAP-3520 | Product Manual - Page 1
  • D-Link DAP-3520 | Product Manual - Page 2
    or organization of such revisions or changes. Manual Revisions Revision 1.0 Date March 3, 2009 Description DAP-3520 Revision A1 with firmware version 1.00 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States
  • D-Link DAP-3520 | Product Manual - Page 3
    42 Wireless MAC ACL 42 WLAN Partition 43 Status 44 Device Information 44 Client Information 45 WDS Information 46 Stats 47 Ethernet 47 WLAN 48 Log 49 View Log 49 Log Settings 50 Maintenance 52 Administrator Settings 52 Limit Administrator 53 System Name Settings 54 D-Link DAP-3520
  • D-Link DAP-3520 | Product Manual - Page 4
    57 Ping Control Setting 58 Firmware and SSL Certification Upload....... 59 Configuration File 60 Time and Date 61 System 62 System Settings 62 Help 63 Troubleshooting 64 Technical Specifications 67 Warranty 69 Technical Support 75 Registration 76 D-Link DAP-3520 User Manual iii
  • D-Link DAP-3520 | Product Manual - Page 5
    D-Link DAP-3520. Access Point Power Adapter with Power Cord 4M Ethernet Cable PPraocdkuacgteOCvoenrtevnietsw Mounting Plate Power over Ethernet Base Unit Grounding Wire CD-ROM Screws Note: Using a power supply with a different voltage rating than the one included with the access point will cause
  • D-Link DAP-3520 | Product Manual - Page 6
    latest version of Java installed. Visit www.java.com to download the latest version. CD Installation Wizard Requirements Computer with the following: • Windows® XP with Service Pack 2 or Vista • An installed Ethernet adapter • CD-ROM drive D-Link DAP-3520 User Manual 
  • D-Link DAP-3520 | Product Manual - Page 7
    modes: access point, WDS (Wireless Distribution System) with AP, WDS, Wireless Client, or WISP (Wireless Internet Service Provider) Client Router mode. Use less wiring, enjoy increased flexibility, save time and money with PoE (Power over Ethernet). With PoE, the DAP-3520 shares power and data
  • D-Link DAP-3520 | Product Manual - Page 8
    , USB and Cardbus adapters. • Four Different Operation Modes - Capable of operating in one of four different operation modes to meet your wireless networking needs: Access Point, WDS with AP, WDS, Wireless Client. • Better security with WPA - The DAP-3520 can securely connect wireless clients on the
  • D-Link DAP-3520 | Product Manual - Page 9
    a wireless LAN Wirelessly connect multiple networks while still functioning as a wireless AP Wirelessly connect multiple networks. See the diagram below. AP acts as a wireless network adapter for your Ethernet-enabled device Example of a typical setup using WDS mode. D-Link DAP-3520 User Manual 
  • D-Link DAP-3520 | Product Manual - Page 10
    one end of an Ethernet cable (included with your package) to the LAN port on the DAP-3520 and the other end of the Ethernet cable to either your computer or to your PoE switch. The AP can be powered on by a PoE switch or by the power adapter shipped with the AP. D-Link DAP-3520 User Manual 
  • D-Link DAP-3520 | Product Manual - Page 11
    Blinking Red Solid Green Blinking Green Light Off Solid Green Blinking Green Light Off The device is powering off. The device is booting up. The link is up. Data is being transmitted. The link is down. Wireless is ready. Data is being transmitted. Wireless is off. D-Link DAP-3520 User Manual 
  • D-Link DAP-3520 | Product Manual - Page 12
    show you how to configure your D-Link wireless access point using the web-based configuration utility. If you would like to use the AP Manager II software, please refer to the documentation located on the D-Link CD. Web-based Configuration Utility To configure the DAP-3520, use a computer which is
  • D-Link DAP-3520 | Product Manual - Page 13
    will see the user identification window as shown. Note: If you have changed the default IP address assigned to the DAP-3520, make sure to enter the correct IP address.  Type "admin" in the User Name field.  Leave the Password field blank.  Click the Login button. D-Link DAP-3520 User Manual 
  • D-Link DAP-3520 | Product Manual - Page 14
    logging into the DAP-3520, the following screen will appear: When making changes on most of the configuration screens in this section, use the Apply button at the bottom of each screen to save your configuration changes. Click the Apply button to configure changes. D-Link DAP-3520 User Manual 10
  • D-Link DAP-3520 | Product Manual - Page 15
    Select Access Point from the drop-down menu. The other four choices are WDS with AP, WDS, Wireless Client, and WISP Client Router. Network Name (SSID): Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID's factory default setting is dlink
  • D-Link DAP-3520 | Product Manual - Page 16
    any 802.11n wireless clients or select Auto 20/40 MHz to use both 802.11n and non-802.11n wireless devices on your password and dynamic key changes. No RADIUS server is required. • Select WPA-Enterprise to secure your network with the inclusion of a RADIUS server. D-Link DAP-3520 User Manual
  • D-Link DAP-3520 | Product Manual - Page 17
    or 5 GHz from the drop-down menu. Mode: WDS with AP mode is selected from the drop-down menu. Network Name (SSID): Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID's factory default setting is dlink.The SSID can be easily changed to
  • D-Link DAP-3520 | Product Manual - Page 18
    bridges to wirelessly connect multiple networks. Site Survey: Site Survey will display available wireless networks. Click on the Scan button to search for available wireless secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-3520 User Manual 14
  • D-Link DAP-3520 | Product Manual - Page 19
    from the drop-down menu. Access points using WDS must be on the same channel in order to establish connectivity. Network Name (SSID): Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID's factory default setting is dlink. The SSID can be
  • D-Link DAP-3520 | Product Manual - Page 20
    bridges to wirelessly connect multiple networks. Site Survey: Site Survey will display available wireless networks. Click on the Scan button to search for available wireless secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-3520 User Manual 16
  • D-Link DAP-3520 | Product Manual - Page 21
    access point that the DAP-3520 is connected to. Channel Width: Allows you to select the channel width you would like to operate in. Select 20 MHz if you are not using any 802.11n wireless clients. Auto 20/40 MHz allows both 802.11n and non-802.11n wireless devices on your network. D-Link DAP-3520
  • D-Link DAP-3520 | Product Manual - Page 22
    wireless networks, then click on the name of the wireless network that you want to connect to. Clone MAC Address: Click Enable to allow you to clone a MAC address to the access point your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-3520 User Manual 18
  • D-Link DAP-3520 | Product Manual - Page 23
    wireless networks, then click on the name of a wireless network that you want to connect to. Clone MAC Address: Click Enable to allow you to clone a MAC address to the access point your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-3520 User Manual 19
  • D-Link DAP-3520 | Product Manual - Page 24
    . *Hexadecimal (HEX) digits consist of the numbers 0-9 and the letters A-F. **ASCII (American Standard Code for Information Interchange) is a code that represents English letters using numbers ranging from 0-127. D-Link DAP-3520 User Manual 20
  • D-Link DAP-3520 | Product Manual - Page 25
    the interval during which the group key will be valid. The default value of 1800 is recommended. PassPhrase: When you select WPA-Personal, please enter a PassPhrase in the corresponding field. Confirm PassPhrase: Retype the PassPhrase in the corresponding field. D-Link DAP-3520 User Manual 21
  • D-Link DAP-3520 | Product Manual - Page 26
    of the primary RADIUS server. You must also configure RADIUS port and RADIUS secret. In addition to a primary RADIUS server, the AP allows you to set up an optional backup RADIUS server. RADIUS Port: Enter the RADIUS port. RADIUS Secret: Enter the RADIUS secret. D-Link DAP-3520 User Manual 22
  • D-Link DAP-3520 | Product Manual - Page 27
    . Get IP From: Static IP (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or if you wish to assign a static IP address to the DAP-3520. IP Address: The default IP address is 192.168.0.50. Assign a static IP address that is within the IP address range of
  • D-Link DAP-3520 | Product Manual - Page 28
    sent by an access point to synchronize a wireless network. Specify a value in milliseconds. The default (100) is recommended. Setting a higher beacon interval can help to save the power of wireless clients, while setting a lower one can help a wireless client connect to an access point faster. DTIM
  • D-Link DAP-3520 | Product Manual - Page 29
    allow clients to associate with the AP. User Limit (0 - 64): Set the maximum amount of users that are allowed access (0-64 users).To use this feature, the Connection Limit above must be enabled. For most users, a limit of 10 is recommended. The default setting is 20. D-Link DAP-3520 User Manual 25
  • D-Link DAP-3520 | Product Manual - Page 30
    total of four multi-SSIDs. SSID: Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID's factory default setting is dlink. The SSID can be easily changed to WPA-Enterprise parameters, please go to pages 28-29. D-Link DAP-3520 User Manual 26
  • D-Link DAP-3520 | Product Manual - Page 31
    a password.� configure Cipher Type, and Group Key Update Interval. Cipher Type: Select Auto, AES, or TKIP from the drop-down menu. Group Key Update Interval: Select the interval during which the group key will be valid. The default value of 1800 seconds is recommended. D-Link DAP-3520 User Manual
  • D-Link DAP-3520 | Product Manual - Page 32
    of the primary RADIUS server.You must also configure RADIUS port and RADIUS secret. In addition to a primary RADIUS server, the AP allows you to set up an optional backup RADIUS server. RADIUS Port: Enter the RADIUS port. RADIUS Secret: Enter the RADIUS secret. D-Link DAP-3520 User Manual 28
  • D-Link DAP-3520 | Product Manual - Page 33
    the DAP-3520 without a VLAN tag will have a VLAN tag inserted with a PVID. The VLAN List tab displays the current VLANs. VLAN Status: Use the radio button to toggle to Enable. Next, go to the Add/Edit VLAN tab to add or modify an item on the VLAN List tab. D-Link DAP-3520 User Manual 29
  • D-Link DAP-3520 | Product Manual - Page 34
    on a Virtual LAN (VLAN), the switch and DHCP server you are using must also support VLANs. As a prerequisite step, configure a port on the switch for handling VLAN tagged packets as described in the IEEE 802 PVID: The Port VLAN Identifier is displayed in this column. D-Link DAP-3520 User Manual 30
  • D-Link DAP-3520 | Product Manual - Page 35
    to toggle to Enable. VLAN ID (VID): Provide a number between 1 and 4094 for the Internal VLAN. VLAN Name: Enter the VLAN to add or modify. D-Link DAP-3520 User Manual 31
  • D-Link DAP-3520 | Product Manual - Page 36
    Status as well as to configure various types of PVID settings. Click the Apply button to let your changes take effect. VLAN Status: Use the radio button to toggle to Enable. PVID Auto Assign Status: Use the radio button to toggle PVID auto assign status to Enable. D-Link DAP-3520 User Manual 32
  • D-Link DAP-3520 | Product Manual - Page 37
    your changes take effect. AP List: The choices include All, Valid, Neighbor, Rogue, and New. Detect: Click this button to initiate a scan of the network. D-Link DAP-3520 User Manual 33
  • D-Link DAP-3520 | Product Manual - Page 38
    Days(s). If Select Day(s) is selected, check the specific days you want the rule to be effective on. All Days(s): Check this box to select all days. Start Time: Enter the start time for the rule. End Time: Enter the end time for the rule. Wireless: Select Off and On. D-Link DAP-3520 User Manual 34
  • D-Link DAP-3520 | Product Manual - Page 39
    . QoS supports overlaps between rules. If more than one rule matches a specific message flow, the rule with the highest priority will be used. QoS (Quality of Service): Enable this option if you want to allow QoS to prioritize your traffic Priority Classifiers. HTTP: Allows the access point to
  • D-Link DAP-3520 | Product Manual - Page 40
    to a flow of messages for which the other computer's IP address falls within the range set here. Host 2 Port Range: The rule applies to a flow of messages for which host 2's port number is within the range set here when the Protocol is set to TCP, UDP, or Both. D-Link DAP-3520 User Manual 36
  • D-Link DAP-3520 | Product Manual - Page 41
    Host Configuration Protocol (DHCP) assigns dynamic IP addresses to devices on the network. This protocol simplifies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign new IP addresses. Select Enable to allow the DAP-3520 to
  • D-Link DAP-3520 | Product Manual - Page 42
    www.dlink.com into IP addresses. Domain Name: Enter the domain name of the network, if applicable. (An example of a domain name is: www.dlink.com.) Lease Time (60-31536000 sec): The lease time is the period of time before the DHCP server will assign new IP addresses. D-Link DAP-3520 User Manual 38
  • D-Link DAP-3520 | Product Manual - Page 43
    the device in this list. Assigned MAC Address: Enter the MAC address of the device requesting association here. Subnet Mask: Define the submask of the IP address specified in the "IP Assigned From" field. Gateway: Specify the Gateway address for the wireless network. D-Link DAP-3520 User Manual 39
  • D-Link DAP-3520 | Product Manual - Page 44
    a dynamically assigned IP address, if applicable. DNS: Enter the Domain Name System (DNS) server address for the wireless network. The DNS server translates domain names such as www.dlink.com into IP addresses. Domain Name: Specify the domain name for the network. D-Link DAP-3520 User Manual 40
  • D-Link DAP-3520 | Product Manual - Page 45
    . Host Name: The host name of the client. Binding MAC Address: The MAC address of a device on the network that is within the DHCP static IP address pool. Assigned IP Address: The current corresponding DHCP-assigned static IP address of the device. D-Link DAP-3520 User Manual 41
  • D-Link DAP-3520 | Product Manual - Page 46
    Wireless MAC ACL Wireless Band: Displays the current wireless band rate. Access Control List: Select Disable to disable the filters function. Select Accept to accept only those devices with MAC addresses in the Access and click Delete to remove it from this list. D-Link DAP-3520 User Manual 42
  • D-Link DAP-3520 | Product Manual - Page 47
    exchange data through the AP. Guest mode is for creating a hotspot. Clients connecting to this SSID will not be able to see other wireless devices on this wireless network. They will only be able to network to devices connected via the Ethernet port on the DAP-3520. D-Link DAP-3520 User Manual 43
  • D-Link DAP-3520 | Product Manual - Page 48
    Status Device Information Device Information: This read-only window displays the configuration settings of the DAP-3520, including the firmware version and the device's MAC address. D-Link DAP-3520 User Manual 44
  • D-Link DAP-3520 | Product Manual - Page 49
    address of the client. Band: Displays the wireless band that the client is connected to. Authentication: Displays the type of authentication being used. Signal: Displays the client's signal strength. Power Saving Mode: Displays the status of the power saving feature. D-Link DAP-3520 User Manual 45
  • D-Link DAP-3520 | Product Manual - Page 50
    the DAP-3520. Name: Displays the name of the client. MAC: Displays the MAC address of the client. Authentication: Displays the type of authentication being used. Signal: Displays the WDS link signal strength. Status: Displays the status of the power saving feature. D-Link DAP-3520 User Manual 46
  • D-Link DAP-3520 | Product Manual - Page 51
    Ethernet Traffic Statistics: This page displays transmitted and received count statistics for packets and bytes. Stats Ethernet D-Link DAP-3520 User Manual 47
  • D-Link DAP-3520 | Product Manual - Page 52
    WLAN Traffic Statistics: This page displays wireless network statistics for data throughput, transmitted and received frames, and frame errors. WLAN D-Link DAP-3520 User Manual 48
  • D-Link DAP-3520 | Product Manual - Page 53
    and network messages including a time stamp and message type. The log information includes but is not limited to the following items: cold start AP, upgrading firmware, client associate and disassociate with AP, and web login. The web page holds up to 500 logs. D-Link DAP-3520 User Manual 49
  • D-Link DAP-3520 | Product Manual - Page 54
    address must correspond with the SMTP server configured above. Email Server Address: Enter the IP address of the server you would like to send the DAP-3520 log to. SMTP Port: Enter a TCP port number to relay outbound mail to your mail server. The default port is 25. D-Link DAP-3520 User Manual 50
  • D-Link DAP-3520 | Product Manual - Page 55
    Enter an appropriate user name for your e-mail account. Password: Enter an appropriate password for your e-mail account. Confirm Password: Retype the password for your e-mail account. Schedule: Use the drop-down and then the log entry will be automatically cleared. D-Link DAP-3520 User Manual 51
  • D-Link DAP-3520 | Product Manual - Page 56
    Maintenance Administrator Settings Check one or more of the six main categories to display the various hidden administrator parameters and settings displayed on the next five pages. D-Link DAP-3520 User Manual 52
  • D-Link DAP-3520 | Product Manual - Page 57
    specific VLAN ID that the administrator will be allowed to log in from. Limit Administrator IP: Check to enable the Limit Administrator IP address. IP Range: Enter the IP address range that the administrator will be allowed to log in from and then click the Add button. D-Link DAP-3520 User Manual
  • D-Link DAP-3520 | Product Manual - Page 58
    Settings System Name Settings: Each of the six main categories display various hidden administrator parameters and settings. System Name: The name of the device. The default name is D-Link DAP-3520. Location: The physical location of the device, e.g. office. D-Link DAP-3520 User Manual 54
  • D-Link DAP-3520 | Product Manual - Page 59
    Password: When changing your password, enter the new password here. The password is case-sensitive. "A" is a different character than "a." The length should be between 0 and 12 characters. Confirm Password: Enter the new password a second time for confirmation purposes. D-Link DAP-3520 User Manual
  • D-Link DAP-3520 | Product Manual - Page 60
    administrator parameters and settings. Status: Status is enabled by default. Uncheck the box to disable the console. Console Protocol: Select the type of protocol you would like to use, Telnet or SSH. Timeout: Set to 1 Min, 3 Mins, 5 Mins, 10 Mins, 15 Mins or Never. D-Link DAP-3520 User Manual 56
  • D-Link DAP-3520 | Product Manual - Page 61
    various hidden administrator parameters and settings. Status: Check the box to enable the SNMP functions. This is enabled by default. Public Community String: Enter the public SNMP community string. Private Community String: Enter the private SNMP community string. D-Link DAP-3520 User Manual 57
  • D-Link DAP-3520 | Product Manual - Page 62
    Ping Control Setting Each of the six main categories display various hidden administrator parameters and settings. Status: Check the box to enable Ping control. D-Link DAP-3520 User Manual 58
  • D-Link DAP-3520 | Product Manual - Page 63
    .After downloading the most recent version of firmware for the DAP-3520 from http://support.dlink.com to your local computer, use the Browse button to locate the firmware file on your computer. Click Upload to update the firmware version. Please do not turn the power off while upgrading. Upload SSL
  • D-Link DAP-3520 | Product Manual - Page 64
    Download to save the current DAP-3520 configuration to your local computer. Note that if you save one configuration with the administrator's password now, after resetting your DAP-3520, and then updating to this saved configuration file, the password will be gone. D-Link DAP-3520 User Manual 60
  • D-Link DAP-3520 | Product Manual - Page 65
    IP address. Set the Date and Time Manually: You can either manually set the time for your AP here, or you can click the Copy Your Computer's Time Settings button to copy the time from the computer you are using (Make sure that the computer's time is set correctly). D-Link DAP-3520 User Manual
  • D-Link DAP-3520 | Product Manual - Page 66
    System System Settings Restart the Device: Click Restart to restart the DAP-3520. Restore to Factory Default Settings: Click Restore to restore the DAP-3520 back to factory default settings. D-Link DAP-3520 User Manual 62
  • D-Link DAP-3520 | Product Manual - Page 67
    Help: Scroll down the Help page for topics and explanations. Help D-Link DAP-3520 User Manual 63
  • D-Link DAP-3520 | Product Manual - Page 68
    of the DAP-3520 Wireless Access Point. We will cover various aspects of the network setup, especially the network adapters. Please read the following if you are having any technical difficulties. Note: It is recommended that you use an Ethernet connection to configure the DAP-3520. 1. The computer
  • D-Link DAP-3520 | Product Manual - Page 69
    .  If it is necessary to assign a Static IP Address to the wireless adapter. If you are entering a DNS Server address, you must also enter the Default Gateway Address. Remember that if you have a DHCP-capable router, you will not need to assign a static IP address. D-Link DAP-3520 User Manual 65
  • D-Link DAP-3520 | Product Manual - Page 70
    Link products let you access your network from virtually anywhere you want, however, the positioning of the products within your environment will affect its wireless range. 4. Why does my wireless connection keep dropping?  Antenna Orientation - try different antenna orientations for the DAP-3520
  • D-Link DAP-3520 | Product Manual - Page 71
    can lower actual data throughout rate. **Please note that operating frequency ranges vary depending on the regulations of individual countries and jurisdictions. The DAP-3520 is not supported in the 5.25~5.35GHz and 5.47 ~ 5.725GHz frequency ranges in some regions. D-Link DAP-3520 User Manual 67
  • D-Link DAP-3520 | Product Manual - Page 72
    11b: • DQPSK, DBPSK, DSSS, and CCK Embedded Directional Antenna Peak Gain • 8dBi Gain @2.4GHz • 10dBi Gain @5GHz Maximum Transmit Output Power • 17 dBm@ 2.4 GHz • 16 dBm @5 GHz Rating • IP65 Weight • 1.58 lbs (717g) Dimensions • L = 198 mm • W = 163 mm • H = 58 mm D-Link DAP-3520 User Manual 68
  • D-Link DAP-3520 | Product Manual - Page 73
    as otherwise stated herein. • Hardware (excluding power supplies and fans): One (1) year • Power supplies and fans: One (1) year • the actual purchase price paid. Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement Link DAP-3520 User Manual 69
  • D-Link DAP-3520 | Product Manual - Page 74
    be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. DLink will only replace the defective portion of the product and will not ship back any accessories. D-Link DAP-3520 User Manual 70
  • D-Link DAP-3520 | Product Manual - Page 75
    manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than D-Link OF THE PRODUCT. D-Link DAP-3520 User Manual 71
  • D-Link DAP-3520 | Product Manual - Page 76
    notice. Copyright ©2009 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. D-Link DAP-3520 User Manual 72
  • D-Link DAP-3520 | Product Manual - Page 77
    are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. D-Link DAP-3520 User
  • D-Link DAP-3520 | Product Manual - Page 78
    distance 20cm between the radiator & your body. This device has been designed to operate with an antenna having a maximum gain of 10dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50ohms. D-Link DAP-3520 User Manual
  • D-Link DAP-3520 | Product Manual - Page 79
    Telephone: (877) 354-6555 D-Link Technical Support over the Internet: http://support.dlink.com Tech Support for customers within Canada: D-Link Technical Support over the Telephone: (877) 354-6560 D-Link Technical Support over the Internet: http://support.dlink.com D-Link DAP-3520 User Manual 75
  • D-Link DAP-3520 | Product Manual - Page 80
    Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 March 6, 2009 D-Link DAP-3520 User Manual 76
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80