D-Link DCS-1130 Product Manual - Page 20
Connecting to a Wireless Network Using WPS DCS-1130 - wireless network camera
UPC - 790069321627
View all D-Link DCS-1130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Section 3 - Installation Connecting to a Wireless Network Using WPS (DCS-1130) If your router supports WPS connection, you can connect your camera using the WPS button on the camera. Press and hold the WPS button on the side of the camera for three seconds. The status LED on the front of the camera will turn blue. Press the WPS button on your router within 60 seconds. The WPS button is usually on the front or side of your router. On some routers, you may need to log in to the web interface and then click on an onscreen button to activate the WPS feature. If you are not sure where the WPS button is on your router, please refer to your router's User Manual. The DCS-1130 will then automatically create a wireless connection to your router. While connecting, your camera's LED will flash and then your camera will reboot. After rebooting, the status LED on the front of the camera will turn solid green. D-Link DCS-1100/1130 User Manual 15