D-Link DCS-2102 User Manual - Page 10
Hardware Installation - dcs 2121
View all D-Link DCS-2102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Hardware Installation Attach the Antenna (DCS-2121 only) Screw the wireless antenna onto the antenna connector. Connect the camera base 1. Screw the base stem into the base. 2. Take the hinge bracket and tighten the wheel. 3. Screw the hinge bracket into the base stem. 4. Screw the collar onto the hinge bracket. 5. Screw the camera onto the completed base and tighten the collar. You can adjust the angle and pivot of the camera by loosening the wheel and retightening it after moving it to the desired position. 2 1 7 5 4 3
7
2
1
4
5
3
Hardware Installation
Attach the Antenna (DCS-2121 only)
Screw the wireless antenna onto the antenna connector.
Connect the camera base
1. Screw the base stem into the base.
2. Take the hinge bracket and tighten the wheel.
3. Screw the hinge bracket into the base stem.
4. Screw the collar onto the hinge bracket.
5. Screw the camera onto the completed base and tighten the collar.
You can adjust the angle and pivot of the camera by loosening the wheel and retightening it after moving it to the desired position.