D-Link DCS-3415 Quick Installation Guide
D-Link DCS-3415 Manual
 |
UPC - 790069313752
View all D-Link DCS-3415 manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DCS-3415 manual content summary:
- D-Link DCS-3415 | Quick Installation Guide - Page 1
- D-Link DCS-3415 | Quick Installation Guide - Page 2
and a 32MB video card is required for multiple camera viewing and recording in IP surveillance program) • An available Ethernet connection Package Contents DCS-3415 18x PoE Network Camera Camera Stand Quick Install Guide CD-ROM with Manual and Setup Wizard Power Adapter CAT5 Ethernet Cable - D-Link DCS-3415 | Quick Installation Guide - Page 3
terminal block. The I/O connectors provide the physical interface to send and receive digital signals to and from a variety of external devices. DC12V output Support for external device (like IR light) RS485 Port is designed for external pan/tilt/zoom devices. D-Link DCS-3415 Quick Install Guide - D-Link DCS-3415 | Quick Installation Guide - Page 4
slot CompactFlash (CF) is a mass storage device format used in portable electronic devices. The CF card slot can be seen at the side of the network camera. Note: Ensure to remove the rubber strip before using it. D-Link DCS-3415 Quick Install Guide - D-Link DCS-3415 | Quick Installation Guide - Page 5
AC power outlet. Note: When you have a proper connection, the LED on the network camera will turn green.The light may go on and off and your computer may show an intermittent loss of connectivity. This is normal until you have configured your Network Camera. D-Link DCS-3415 Quick Install Guide - D-Link DCS-3415 | Quick Installation Guide - Page 6
to the Network Camera's bottom socket cavity. Attach the camera stand to the Network Camera and place it for your application. There are holes located in the base of the camera stand allowing the camera to be mounted to the ceiling or any wall securely. D-Link DCS-3415 Quick Install Guide - D-Link DCS-3415 | Quick Installation Guide - Page 7
Software Installation Software Installation Turn on the computer and insert the D-Link DCS-3415 CD into the CD-ROM drive. The following step-by-step instructions displayed are shown when using Next Click I Agree to accept the License Agreement. Click I Agree D-Link DCS-3415 Quick Install Guide - D-Link DCS-3415 | Quick Installation Guide - Page 8
Software Installation To start the installation click Install. Note: The installation may take several minutes to complete. Click Install Click Finish to complete the installation. Click Finish D-Link DCS-3415 Quick Install Guide - D-Link DCS-3415 | Quick Installation Guide - Page 9
your network, there will be a valid IP Address displayed here. Note: A DHCP server is a device such as a router that automatically issues IP settings. Click Manual Setup Enter the admin ID and password. Note: The default Admin ID is admin with the password left blank. Click Next D-Link DCS-3415 - D-Link DCS-3415 | Quick Installation Guide - Page 10
to obtain a new IP address every time the camera starts up. Click Next to continue. Click Next Select UPnP Port Forwarding if your router supports this function. If not, choose Manual to manually enter your port numbers. Click Next to continue. Click Next D-Link DCS-3415 Quick Install Guide 10 - D-Link DCS-3415 | Quick Installation Guide - Page 11
asking you if you want to access the DCS-3415 via mobile phone. Clicking Yes will set the video resolution to 176x144. Click Apply to save and activate the settings listed in the window to the device. Application may take a few minutes to process. Click Apply 11 D-Link DCS-3415 Quick Install Guide - D-Link DCS-3415 | Quick Installation Guide - Page 12
access your device. Click Add to my favorite to save the address and then click Exit to complete the installation. Click Exit Double-click the DCS-3415 to launch the camera's web configuration page. Note: Please refer to the user manual for more information. D-Link DCS-3415 Quick Install Guide 12 - D-Link DCS-3415 | Quick Installation Guide - Page 13
username and leave the password blank. Click OK to continue. This section shows your camera's live video. You can control your settings using the buttons at the bottom. For more information on using the web configuration, please refer to the user manual. 13 D-Link DCS-3415 Quick Install Guide - D-Link DCS-3415 | Quick Installation Guide - Page 14
for the administrator to manage up to 32 D-Link IP cameras remotely. The administrator can use the software to configure the advanced settings for the camera. D-ViewCam is a complete management tool and a language version and click OK to continue. Click OK D-Link DCS-3415 Quick Install Guide 14 - D-Link DCS-3415 | Quick Installation Guide - Page 15
Next to continue. Click Next Click Next to start the installation. Note: The D-ViewCam installation process may take several minutes to complete. Click Next 15 D-Link DCS-3415 Quick Install Guide - D-Link DCS-3415 | Quick Installation Guide - Page 16
D-ViewCam Installation Click Finish to complete the installation. Click Finish D-Link DCS-3415 Quick Install Guide 16 - D-Link DCS-3415 | Quick Installation Guide - Page 17
Start > All Programs > D-Link > D-Link D-ViewCam. Use admin as the default user name and leave the password blank. Click the (Check Box) to continue. Click The D-ViewCam screen will appear as shown below. Click (Next) to begin the Add Camera wizard. Click 17 D-Link DCS-3415 Quick Install Guide - D-Link DCS-3415 | Quick Installation Guide - Page 18
are located in the same subnet within the same LAN. The system will place all found cameras under the default map called My Map. Click Next to continue. If you choose Add Manually, you will need to enter the IP address of the camera. Click Next to continue. D-Link DCS-3415 Quick Install Guide 18 - D-Link DCS-3415 | Quick Installation Guide - Page 19
shows the detected IP camera(s) information. You can choose and schedule the recording for each camera(s). • 24/7 Continuous Recording: Continuously record 24 hours a day, 7 days a motion is detected. Please refer to the user manual for more information. 19 D-Link DCS-3415 Quick Install Guide - D-Link DCS-3415 | Quick Installation Guide - Page 20
D-ViewCam Installation Select Yes to add another camera, or select No to continue. Note: After you have finished adding your camera(s), click Close to view your camera(s). Your D-ViewCam Installation is Complete! D-Link DCS-3415 Quick Install Guide 20 - D-Link DCS-3415 | Quick Installation Guide - Page 21
Notes Notes 21 D-Link DCS-3415 Quick Install Guide - D-Link DCS-3415 | Quick Installation Guide - Page 22
Notes Notes D-Link DCS-3415 Quick Install Guide 22 - D-Link DCS-3415 | Quick Installation Guide - Page 23
Notes Notes 23 D-Link DCS-3415 Quick Install Guide - D-Link DCS-3415 | Quick Installation Guide - Page 24
, and network overhead lower actual data throughput rate. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted on the packaging. Visit www.dlink.com for more details. D-Link DCS-3415 Quick Install Guide 24
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
