D-Link DCS-5220 User Manual
D-Link DCS-5220 - Wireless Pan/Tilt Internet Camera Network Manual
 |
UPC - 790069313752
View all D-Link DCS-5220 manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DCS-5220 manual content summary:
- D-Link DCS-5220 | User Manual - Page 1
- D-Link DCS-5220 | User Manual - Page 2
49 Record Snapshots to your FTP server with Motion Detection 50 Installing the IP surveillance Software 55 Using the Multicamera Management Software 60 Launcher 60 Monitor Program 64 Playback Program 96 Schedule Video Recording with Motion Detection..... 107 D-Link DCS-5220 User Manual - D-Link DCS-5220 | User Manual - Page 3
& Configuring 3G Compatible Cell Phones...... 120 Play from RealPlayer 121 Play from PVPlayer 126 Troubleshooting 129 Wireless Basics 132 Wireless Modes 136 Networking Basics 137 Check your IP Address 137 Statically Assign an IP Address 138 Technical Specifications 139 D-Link DCS-5220 User - D-Link DCS-5220 | User Manual - Page 4
Link DCS-5220 Wireless PT Internet Camera with 3G Mobile Video Support • CAT5 Ethernet Cable • Power Adapter • Antenna • Manual and Software on CD • Quick Install Guide • Camera card is required for multiple camera viewing and recording in IP surveillance program) D-Link DCS-5220 User Manual - D-Link DCS-5220 | User Manual - Page 5
The D-Link SECURICAM Network DCS-5220 Wireless PT Internet Camera is a powerful surveillance system that connects wirelessly to your 802.11b/g network. The DCS-5220 features enhanced 802.11b/g and connects wirelessly at a rate of up to 54Mbps1 (Megabits per second). The DCS-5220 differs from - D-Link DCS-5220 | User Manual - Page 6
Camera can also be used for intruder detection with its motion-detection mode, capture still images and video images for archiving and many more applications. The wireless capability enables you to place the camera where it is inconvenient to install network cables. D-Link DCS-5220 User Manual - D-Link DCS-5220 | User Manual - Page 7
camera is booting, a flashing red LED and steady green LED light will appear next. The red LED will be turned off during self-test. Upon passing the self-test, a steady red LED and flashing green LED light will appear, indicating a good connection to the Ethernet port. D-Link DCS-5220 User Manual - D-Link DCS-5220 | User Manual - Page 8
Button When the reset button is pressed, the power and activity LED light will both appear steady on. While pressing the reset button both LEDs will begin to flash, indicating that the DCS-5220's settings are now restored to factory default. Release the reset button. D-Link DCS-5220 User Manual - D-Link DCS-5220 | User Manual - Page 9
is set, you may disconnect the Ethernet cable and begin communicating wirelessly with your DCS-5220. Attach the external power supply to the DC power input connector located on the Internet Camera's back panel (labeled DC 12V) and connect it to an AC power outlet. D-Link DCS-5220 User Manual - D-Link DCS-5220 | User Manual - Page 10
fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DCS-5220 User Manual 10 - D-Link DCS-5220 | User Manual - Page 11
Section 3 - Configuration Configuration Turn on the computer and Insert the D-Link DCS-5220 Driver CD in the CD-ROM drive. The step-by-step instructions will help you to search and setup your IP camera smoothly and quickly. If the CD Autorun function does not automatically start on your computer, - D-Link DCS-5220 | User Manual - Page 12
among networking equipment, software, and peripherals. The DCS-5220 is an UPnP enabled Internet camera. If your operating system is UPnP enabled, the device will be easier to configure. If you do to Start > Settings. Click Control Panel. Click Add or Remove Programs D-Link DCS-5220 User Manual 12 - D-Link DCS-5220 | User Manual - Page 13
Section 3 - Configuration Click Add/Remove Windows Components The following screen will appear. Select Networking Services. Click Details Select Universal Plug and Play. Click OK D-Link DCS-5220 User Manual 13 - D-Link DCS-5220 | User Manual - Page 14
Section 3 - Configuration Click Next Please wait while Setup configures the components. Click Finish D-Link DCS-5220 User Manual 14 - D-Link DCS-5220 | User Manual - Page 15
Section 3 - Configuration To view your DCS-5220 Internet Camera in an Internet browser, go to your Desktop and click My Network Places. Click DCS-5220 (192.168.0.120). D-Link DCS-5220 User Manual 15 - D-Link DCS-5220 | User Manual - Page 16
Section 3 - Configuration After you click on the DCS-5220 icon, your Internet browser will automatically be opened to the IP Address of the DCS-5220, in this example it is: http://192.168.0.120. Your DCS-5220 may have a different IP Address. D-Link DCS-5220 User Manual 16 - D-Link DCS-5220 | User Manual - Page 17
The window in the center of your browser is the camera image window. You should now see a video image and hear the audio over your computer speakers from the DCS-5220. If you are having problems, please consult the Troubleshooting section of this manual (page 128). D-Link DCS-5220 User Manual 17 - D-Link DCS-5220 | User Manual - Page 18
configured with the Installer program. This section of the manual will cover how to use the Internet Camera in two methods: • Using the DCS-5220 with an Internet browser and accessing the screens to control and monitor the camera. • Using IP surveillance software with the DCS-5220. D-Link DCS-5220 - D-Link DCS-5220 | User Manual - Page 19
://192.168.0.120). In the example, this address is 192.168.0.120. Your address may differ. If a window appears asking to install a Verisign certificate for authentication click Yes. This allows the proprietary MPEG4 video stream to be recognized by Internet Explorer. D-Link DCS-5220 User Manual 19 - D-Link DCS-5220 | User Manual - Page 20
setup according to preset positions. (Please refer to "camera control" setup for the preset list function). Snapshot: Click on the Snapshot button to capture a snapshot image. The image will pop up in a new window. This image can be saved to your local hard drive. D-Link DCS-5220 User Manual - D-Link DCS-5220 | User Manual - Page 21
3 - Configuration Client Setup Media Options: You can disable audio when viewing video, disable video while keeping audio, or have both video and audio present. Protocol Options: Most users should use hard drive, when recording video directly from the web interface. D-Link DCS-5220 User Manual 21 - D-Link DCS-5220 | User Manual - Page 22
features of the DCS-5220. The Setup page provides the following configuration options: Wizard, Network Setup, Wireless Setup, Dynamic DNS, Image Setup, Audio and Video, Mail and FTP, Motion Detection, Time and Date, Schedule, Access List, Camera Control, and Logout. D-Link DCS-5220 User Manual 22 - D-Link DCS-5220 | User Manual - Page 23
Detection Setup Wizard: This wizard can help you to setup the motion detection step by step, including the motion detection area, sensitivity and the schedule of actions. Manual Motion Detection Setup: This button will take you to the motion detection setup page. D-Link DCS-5220 User Manual 23 - D-Link DCS-5220 | User Manual - Page 24
through a DSL modem, and the ISP (Internet Service Provider) requires you to use PPPoE for the Internet connection. Enter the authentication information from your ISP into these fields. Note: The Internet (WAN) IP Address of the PPPoE will be sent through e-mail. D-Link DCS-5220 User Manual 24 - D-Link DCS-5220 | User Manual - Page 25
default port 80. When the administrator changes the HTTP port of the DCS-5220(which has an IP address of 192.168.0.100) from 80 to 8080, you must type http://192.168.0.100:8080 in the web browser address field to reach the web configuration number of video RTP plus 1. D-Link DCS-5220 User Manual 25 - D-Link DCS-5220 | User Manual - Page 26
then make sure you disable this feature. Long Preamble is the default, as it is a required setting for Wi-Fi compatibility. Security: Select the encryption type from the drop-down list. The default setting for encryption is None, which means the security is disabled. D-Link DCS-5220 User Manual 26 - D-Link DCS-5220 | User Manual - Page 27
Section 3 - Configuration Auth mode: If the encryption type selected is WEP from different security keys. Pre-shared key: The Key allows the camera to connect to other devices by using WPA-PSK encryption. Pre-shared key must be 8-63 characters or 64 hex characters. D-Link DCS-5220 User Manual 27 - D-Link DCS-5220 | User Manual - Page 28
DNS provider from the drop-down list. Hostname: Enter the host name of the DDNS server. Username / Email: Enter your username or e-mail used to connect to the DDNS server. Password / Key: Enter your password or key used to connect to the DDNS server. D-Link DCS-5220 User Manual 28 - D-Link DCS-5220 | User Manual - Page 29
- Configuration Image Setup Click the Image Setup button on the left side of the Setup screen default setting for white balance is "Auto". Brightness: Image Brightness is adjustable, you can set from among eleven levels ranged from -5 to +5. The default setting is zero. D-Link DCS-5220 User Manual - D-Link DCS-5220 | User Manual - Page 30
of the Setup screen to access audio and video settings that affect how the audio and video appears. Configure for computer Select this option to switch to computer viewing. viewing: Configure for mobile to send the maximum frames when images change drastically. D-Link DCS-5220 User Manual 30 - D-Link DCS-5220 | User Manual - Page 31
Configuration Fixed bit rate: These settings are to optimize your camera performance with your available bandwidth. Select a fixed bandwidth for your camera operation. This option allows the user This will mute the audio for all connections. AAC: (Advanced Audio Coding) Link DCS-5220 User Manual 31 - D-Link DCS-5220 | User Manual - Page 32
than default port 21. If you find that you want to change the port to a port number other than 21, you will need to specify the port when connecting to the FTP server. For example FTP://68.5.1.81:60 (if you are to use port 60 for your FTP server port) D-Link DCS-5220 User Manual 32 - D-Link DCS-5220 | User Manual - Page 33
settings only if necessary. Consult with your network administrator or your Internet Service Provider (ISP) if you do not have the necessary information. If you cannot connect to the camera, refer to page 8 for camera reset and restore factory settings procedures. D-Link DCS-5220 User Manual 33 - D-Link DCS-5220 | User Manual - Page 34
Section 3 - Configuration Motion Detection Click the Motion Detection button on the left side of the Setup screen to enable the motion detection function of the DCS-5220 Internet Camera. Enable motion filled by a moving object before it triggers motion detection. D-Link DCS-5220 User Manual 34 - D-Link DCS-5220 | User Manual - Page 35
Section 3 - Configuration To display motion detection, a graphic bar will rise or for motion detection). You can return to the DCS-5220 Home Page and the monitored window will not be visible, but the red frame will show on the home page when motion is detected. D-Link DCS-5220 User Manual 35 - D-Link DCS-5220 | User Manual - Page 36
server Used: Assign the IP address or domain name of the time server. Leaving the text box blank will let the DCS-5220 connect to default time servers. Update interval: Used to adjust the hour of time servers for local settings.The time interval for the camera to update the time settings from a NTP - D-Link DCS-5220 | User Manual - Page 37
uploading during the time interval and the upload file will not able to playback. To avoid the problem, please reduce the maximum file size or enlarge the time interval. Motion detection: This option enables motion detection triggering for video clip uploading. D-Link DCS-5220 User Manual 37 - D-Link DCS-5220 | User Manual - Page 38
uploading during the time interval and the upload file will not able to playback. To avoid the problem, please reduce the maximum file size or enlarge the time interval. Motion detection: This option enables motion detection triggering for snapshot uploading. D-Link DCS-5220 User Manual 38 - D-Link DCS-5220 | User Manual - Page 39
FTP put sanpshot with date This option will add a date and time indicator to the video clip file name. For instance, "snapshot@20060102030405. and time suffix: mpg" indicates that the snapshot was captured at Year: 2006; Month: January; Date: 2nd; Time: 03:04:05 AM. D-Link DCS-5220 User Manual 39 - D-Link DCS-5220 | User Manual - Page 40
Video Configuration page, are related to performance. Recording settings for real-time motion images To achieve a real-time visual constraints and everyone's environment is different, any poor connection will impair normal performance. Recording settings for clear D-Link DCS-5220 User Manual 40 - D-Link DCS-5220 | User Manual - Page 41
't have permission to access the video of the camera. Deny List End IP Address: The ending IP Address of the devices (such as a computer) that don't have permission to access the video of the camera. Delete Deny List: Remove the customized setting from the Deny List. D-Link DCS-5220 User Manual 41 - D-Link DCS-5220 | User Manual - Page 42
Locations list and add them to the Selected Locations list by clicking Select. You can then select the order in which the camera will patrol through the preset locations by selecting a location and clicking UP or DN. Click Remove to remove a location from the list. D-Link DCS-5220 User Manual 42 - D-Link DCS-5220 | User Manual - Page 43
Management The DCS-5220 is setup without any passwords by default. This allows the ability to access the DCS-5220 (including the Setup) by anyone as long as the IP address is known. It is recommended that you enter a password to restrict others from accessing your camera. Type a password in the - D-Link DCS-5220 | User Manual - Page 44
. User List: Administrator can edit or delete users here by selecting the user name. Delete user: Remove a user from the user list. IP camera name: The name to identify your camera. Text entered will be displayed in the black bar above the video window with a timestamp. D-Link DCS-5220 User Manual - D-Link DCS-5220 | User Manual - Page 45
configuration settings that were made previously. Reboot: This option will restart the camera. Click Apply on this screen to restore the factory default settings. After confirmation, the system will restart and require the DCC program to locate the IP address of the DCS-5220. D-Link DCS-5220 User - D-Link DCS-5220 | User Manual - Page 46
Section 3 - Configuration Firmware Update File Path: This option allows you to upgrade the firmware via a web browser. Click on Browse to locate the firmware file and then click on Upgrade to apply the firmware to the camera. D-Link DCS-5220 User Manual 46 - D-Link DCS-5220 | User Manual - Page 47
Configuration Status Device Info The Device Info screen lists the following important settings that are currently set for the DCS-5220: • IP camera name • Time and Date • Firmware Version • IP address • IP Subnet mask • Default Gateway • Primary DNS • Secondary DNS • PPPoE • DDNS D-Link DCS-5220 - D-Link DCS-5220 | User Manual - Page 48
address of the remote server. Port: The port number of the remote log server. The default port is 514. Current log: View the system log file. The content of the file reveals useful information about camera configuration and connectivity status after the camera boots up. D-Link DCS-5220 User Manual - D-Link DCS-5220 | User Manual - Page 49
Section 3 - Configuration Help The help page provides detailed information for the camera's Web interface. D-Link DCS-5220 User Manual 49 - D-Link DCS-5220 | User Manual - Page 50
Configuration Record Snapshots to your FTP server with Motion Detection Administrators can combine options on the application page to perform many useful security applications. To upload the snapshots, users can choose either email or FTP according to the user server. D-Link DCS-5220 User Manual 50 - D-Link DCS-5220 | User Manual - Page 51
Section 3 - Configuration In this window, follow the steps below to ensure that motion detection is correctly enabled: 1 Check " on save to enable the activity Next, click the Mail and FTP button under the Setup tab to set the FTP server settings for the DCS-5220. D-Link DCS-5220 User Manual 51 - D-Link DCS-5220 | User Manual - Page 52
FTP user name: Specify the user name to access the external FTP server (ex. John Smith). 1st FTP password: Specify the password to access the external FTP server (ex. 12345). 1st FTP remote folder: Specify the destination folder in the external FTP server (ex. snapshot). D-Link DCS-5220 User Manual - D-Link DCS-5220 | User Manual - Page 53
for the first FTP server. 2nd FTP user name: Specify the user name to access your backup FTP server. 2nd FTP password: Specify the user password to your backup FTP server. 2nd FTP remote folder: Specify the destination folder on your external backup FTP server. D-Link DCS-5220 User Manual 53 - D-Link DCS-5220 | User Manual - Page 54
by FTP and check "FTP put snapshots with date and time suffix". 6. Click the "save settings" button to save the settings. Click the save settings button when finished. You are now able to record snapshots to your FTP server when motion detection is triggered. D-Link DCS-5220 User Manual 54 - D-Link DCS-5220 | User Manual - Page 55
• Scheduled recording for each camera • Email / FTP video snapshots • AVI file export • Motion detection for each camera Click Multicamera management To install IP surveillance, click on the Multicamera management link on the CD included with the Internet Camera. D-Link DCS-5220 User Manual 55 - D-Link DCS-5220 | User Manual - Page 56
Section 3 - Configuration The Welcome screen appears. Click Next Please read the Software Licensing Agreement and click Yes if you wish to accept the agreement. Click No to exit the installation. Click Yes D-Link DCS-5220 User Manual 56 - D-Link DCS-5220 | User Manual - Page 57
User Name and Company Name information. Note: This User Name is not the User Name to log into the IP surveillance program. Click Next You must setup the administrator's password in order to proceed. Input and confirm your password in the window shown below. Click Next D-Link DCS-5220 User Manual - D-Link DCS-5220 | User Manual - Page 58
Section 3 - Configuration Select the installation directory for the IP surveillance software. You can change the installation directory by clicking Browse. Click Next Select the program folder to install the application software. Click Next D-Link DCS-5220 User Manual 58 - D-Link DCS-5220 | User Manual - Page 59
Section 3 - Configuration Click Next The installation is complete. Click Finish D-Link DCS-5220 User Manual 59 - D-Link DCS-5220 | User Manual - Page 60
Launcher will pop up a username/password dialog the first time for menu popup or when Launcher is locked. If a user fails to pass the authentication check, no menu will show up. If a user fails 3 consecutive tries he/she will be locked out for a period of 60 seconds. D-Link DCS-5220 User Manual 60 - D-Link DCS-5220 | User Manual - Page 61
installation. When Launcher is locked, the unlock window will appear, prompting for the user password in order to unlock. The input area of the dialog will be grayed (disabled) for 60 seconds after 3 consecutive failures. Below is the user interface for Launcher: User Interface D-Link DCS-5220 - D-Link DCS-5220 | User Manual - Page 62
the menu, a dialog asking for ID and password will appear. Monitor start up mode: Users can select whether or not to autorun Launcher when Window boots up. Tools: The Change local admin's password dialog looks like this: The User Management utility looks like this: D-Link DCS-5220 User Manual 62 - D-Link DCS-5220 | User Manual - Page 63
will appear prompting for username and password again. Exit: Exits Launcher. If users choose this option, Launcher will show a message box prompting to confirm if users really want to exit, and warn users that exiting Launcher will also close Monitor and Playback. D-Link DCS-5220 User Manual 63 - D-Link DCS-5220 | User Manual - Page 64
with different monitor layouts • Auto alarm in multiple modes • Account-password protection • Multiple recording modes: Event-driven, Scheduled, and manual recording for each camera. • Just-in-time snapshot • Motion detection with 3 alert windows for each camera D-Link DCS-5220 User Manual 64 - D-Link DCS-5220 | User Manual - Page 65
Section 3 - Configuration Application Layout and Functionalities This section demonstrates a global view of the monitor program, shown below. The components Functions Channel Area Layout Area Hard Disk Status Common Control Area DI/DO Control Alert Message Video Area D-Link DCS-5220 User Manual 65 - D-Link DCS-5220 | User Manual - Page 66
Video Server/ Network Camera series product associated with the dedicated video channel. Alert Message: This tool will display the latest alert messages received by the remote Video Server / Network Camera series product associated with the selected video channel. D-Link DCS-5220 User Manual 66 - D-Link DCS-5220 | User Manual - Page 67
, you have the right to do the following tasks: • Run the configuration tool • Change the recording schedule • Change the local settings Again, if you need to change the settings of the DCS-5220, you must have the administrator's password for the camera itself. D-Link DCS-5220 User Manual 67 - D-Link DCS-5220 | User Manual - Page 68
) password of the camera in order to run the configuration. Once you click Configuration Menu > Camera Configurations for setting each camera, all recording processes will be stopped indicated by a warning window popped up in advance to keep you informed. D-Link DCS-5220 User Manual 68 - D-Link DCS-5220 | User Manual - Page 69
Recording Settings Save In the local settings, shown below, three main functionalities are provided: Insert: Click to insert a new camera to the list. Delete: Click to delete a camera from the list. History: Click to view the history of all cameras in the list. D-Link DCS-5220 User Manual 69 - D-Link DCS-5220 | User Manual - Page 70
connection succeeds, the camera will be inserted to the camera selection list. Once the camera is added, you will see the IP address of the camera and also the port that is opened on the camera (port 80 in this example). The selected camera has been added to the selection list. D-Link DCS-5220 User - D-Link DCS-5220 | User Manual - Page 71
button will popup a historical camera list, which lists the latest 16 cameras you have inserted into the camera list. Clicking on one camera in the history list will insert the camera into the camera list. The hisrtory list is shown here. Alert and Recording Settings D-Link DCS-5220 User Manual 71 - D-Link DCS-5220 | User Manual - Page 72
shown below. This will allow you to rearrange the cameras in an order of your choice. Once the camera is moved to a specified location, the proceeding cameras will then move 1 position up or 1 position down depending on which direction the selected camera was moved. D-Link DCS-5220 User Manual 72 - D-Link DCS-5220 | User Manual - Page 73
row in this example). Once you click the Save button (see page 75) in the left-bottom corner of this window, the changes for all camera configurations will be saved and will be applied immediately to the IP surveillance. D-Link DCS-5220 User Manual 73 - D-Link DCS-5220 | User Manual - Page 74
display. You can activate the global settings window from Configuration Menu > Global Settings... shown above. All recording processes will be stopped when activating the global settings window, indicated by a warning window popped up in advance to keep you informed. D-Link DCS-5220 User Manual 74 - D-Link DCS-5220 | User Manual - Page 75
for your camera(s) and conversely, less space will be available for your other applications. If the recording data exceeds this limitation, the new video data will replace the oldest data (on a First In First Out (FIFO) basis) when "Cycle Recording" has been checked. D-Link DCS-5220 User Manual 75 - D-Link DCS-5220 | User Manual - Page 76
Disable the time displaying on the video image. Misc: Allows the user to pan and tilt the camera from the video image. Alert Sound: You can load a custom *.wav file for the alert triggering sound, or you can select a sound file from the Windows® sound file directory. D-Link DCS-5220 User Manual 76 - D-Link DCS-5220 | User Manual - Page 77
. Apply to full screen mode can also be turned on here. Once it has been checked, the status bar in each channel showing date, location, connection, and recording time will be shown in both display frame mode and full screen mode. D-Link DCS-5220 User Manual 77 - D-Link DCS-5220 | User Manual - Page 78
schedule for each video channel. The main features of the scheduling tool are: • Friendly graphic user interface for schedule editing • Flexible schedule scheme suitable for all applications • Individual schedule for each video channel • Periodic automatic recording D-Link DCS-5220 User Manual 78 - D-Link DCS-5220 | User Manual - Page 79
The scheduler will not be accessible until at least one camera has been added to the camera list. Go to the configuration menu and click on Scheduler to launch the Scheduler. The Area, Primary schedule settings, Secondary schedule settings, and Operation Buttons. D-Link DCS-5220 User Manual 79 - D-Link DCS-5220 | User Manual - Page 80
that you want to set a schedule for. Each video channel will display a name, an IP address, and the location. Please note that when you switch between video channels in this area, the changes in the schedule of the previous video channel will be saved automatically. D-Link DCS-5220 User Manual 80 - D-Link DCS-5220 | User Manual - Page 81
week time-line will be automatically added to the hour time-lines, which is shown above. You can also mark and unmark the plotted bar by clicking and dragging with the left and the right mouse button. Hour Time-Line In the figure below, the Hour time-line is displayed. D-Link DCS-5220 User Manual - D-Link DCS-5220 | User Manual - Page 82
you click on the "Apply" button, the scheduling information settings will be written back into the whole editing schedule scheme. That means this edited scheduling time interval is valid only after you "Apply" the changes. D-Link DCS-5220 User Manual 82 - D-Link DCS-5220 | User Manual - Page 83
Section 3 - Configuration Schedule in Event Mode You can select to record in Event mode or Continuous mode by the Schedule mode condition that you would like to record while the condition triggers. Note: The Digital Input is not available for the DCS-5220 camera. D-Link DCS-5220 User Manual 83 - D-Link DCS-5220 | User Manual - Page 84
Section 3 - Configuration High: Checking this will trigger recording while the digital camera will begin recording continuously after scheduling settings are saved. These two modes are the same as the primary schedule. Please refer to the previous section for more detail. D-Link DCS-5220 User Manual - D-Link DCS-5220 | User Manual - Page 85
Section 3 - Configuration Operation Buttons There are six operation buttons that allow you to handle the the default name. Undo: Click on this button to undo all changes for the current schedule since the last save. Close: Click on this button to close the scheduler. D-Link DCS-5220 User Manual 85 - D-Link DCS-5220 | User Manual - Page 86
Location Select window. After you have set your backup settings in the global settings window, you can backup recorded data by clicking "Backup" in the Configuration Menu, as seen below: D-Link DCS-5220 User Manual 86 - D-Link DCS-5220 | User Manual - Page 87
Section 3 - Configuration Using the Monitor Program This section depicts, in detail, how to manipulate the monitor tool. Connection of the DCS-5220 Once you have the privilege to connect to the DCS-5220, the cameras will automatically appear in the video area in the order they are connected. Once - D-Link DCS-5220 | User Manual - Page 88
dropped to other windows. If you drag one camera's video to a window that already has its own camera's video, the two cameras will trade display windows. Dragging and dropping is a very convenient way to manipulate the video channels in the IP surveillance Software. D-Link DCS-5220 User Manual 88 - D-Link DCS-5220 | User Manual - Page 89
Section 3 - Configuration Removing video from a display window Step 1: Move the mouse cursor to the display window that contains the video channel -shape over the trashcan, release the left mouse button. The video in the corresponding display window will disappear. D-Link DCS-5220 User Manual 89 - D-Link DCS-5220 | User Manual - Page 90
Configuration The Layout There are six different layouts available, as shown below, for the display windows in the monitor program. You can select between 1 camera, 4 camera, 6, camera, 9 camera, 13 camera, and 16 camera the pages, as shown in the figure below. D-Link DCS-5220 User Manual 90 - D-Link DCS-5220 | User Manual - Page 91
selected. Input/Output Control Tools IP surveillance includes DI/DO control (Digital Input / Digital Output) control and an alert message receiver. Each of these are described in detail on the following pages. Note: The DI/DO is not available in the DCS-5220 camera. D-Link DCS-5220 User Manual 91 - D-Link DCS-5220 | User Manual - Page 92
MO #1(0,1,1)" means that this is a motion detection alert occurring at 02:41:00 PM in Motion Window 2 and Motion Window 3, for camera #1. If the message "PM 02:41:56=>DI #1" is listed, that means there is an alert triggered by the DI, for camera #1, at 02:41:56 PM . D-Link DCS-5220 User Manual 92 - D-Link DCS-5220 | User Manual - Page 93
the software name, version, user name, and company. Miscellaneous Functions This section will describe some other miscellaneous functions of the icons shown below. The icons, from left to right, are Quit, Minimize, Full Screen, Lock, Stop Alert Sound, and Configuration Menu. D-Link DCS-5220 User - D-Link DCS-5220 | User Manual - Page 94
can be reviewed. Configuration Menu: The menu includes Camera Configuration, Global Settings manually record video from the selected channel. Stop: After video recording has been activated, this button allows you to manually stop recording the selected video channel. D-Link DCS-5220 User Manual - D-Link DCS-5220 | User Manual - Page 95
files at the Configuration menu > Global connection with the DCS-5220. Status Bar The status bar, shown below, displays information about the IP surveillance program such as: Local Time, Current Login User, Login Time, Software Name, and Software Version. Scheduling D-Link DCS-5220 User Manual - D-Link DCS-5220 | User Manual - Page 96
out (from 1:1 to 1:2) • Full screen Flexible searching range adjustment tool: • User input (from full range to 1 second) • Zoom in (from full range to 10 seconds) • Zoom out (up to full range) • Full range System control tool: • Program locking • System settings D-Link DCS-5220 User Manual 96 - D-Link DCS-5220 | User Manual - Page 97
also three visualized controls , i.e. area selection indicator, frame selection indicator, and pull bar. These features provide much more convenience while searching recorded video in the IP surveillance database. D-Link DCS-5220 User Manual 97 - D-Link DCS-5220 | User Manual - Page 98
Section 3 - Configuration Main Areas Display Area The display area is able to show the surveillance database of each camera by time. You can change the video size through the display adjustment tool and tool will be shown in the same place of the control area. D-Link DCS-5220 User Manual 98 - D-Link DCS-5220 | User Manual - Page 99
Configuration Pull Bar The pull bar is a fast, flexible control for seeking data in the selected time period. It represents the total length of time in that period. You can pull the indicator on the pull bar to the specific time dialog will appear on the screen. D-Link DCS-5220 User Manual 99 - D-Link DCS-5220 | User Manual - Page 100
Section 3 - Configuration The items in to export them. Exporting bitmap files will be stored in the sub-directory (camera name) under the directory you set here. Modulation Mode: The modulation mode cannot ." 4) Changing the playback method selector to "Time Period." D-Link DCS-5220 User Manual 100 - D-Link DCS-5220 | User Manual - Page 101
3 - Configuration Under the normal display (single frame) mode, you can use all the tools provided with the playback program, except the page control. In this mode, the two labels under the pull bar show the starting and the ending time of the interval individually (as shown below). D-Link DCS-5220 - D-Link DCS-5220 | User Manual - Page 102
Section 3 - Configuration Histogram Area The histogram area in the normal display (single frame) mode only shows the events' occurred time and the percentage the selection of the beginning time and the ending time, playback method selector, and alert area selector. D-Link DCS-5220 User Manual 102 - D-Link DCS-5220 | User Manual - Page 103
Configuration Location Selector The location selector is a control that lets you select the camera you want to see (refer to the figure above). The location name is the same as the camera 0 by default settings when you change the location selector to another window. D-Link DCS-5220 User Manual 103 - D-Link DCS-5220 | User Manual - Page 104
that once you press the "Stop" button, the start point will be reset to the start of the present period. Pause/Resume: The "Pause" button you click on the "Forward" button one time. Fast Play and Slow Play: The camera supports a maximum of x16 fast forward play and Link DCS-5220 User Manual 104 - D-Link DCS-5220 | User Manual - Page 105
3 - Configuration Display Adjustment Due to the limitation of the display area size, the maximum zoom in ratio supported is only 2.25:1 for NTSC modulation mode and 1.875:1 for PAL modulation mode at any time when the program is under the normal display mode. D-Link DCS-5220 User Manual 105 - D-Link DCS-5220 | User Manual - Page 106
Section 3 - Configuration System Control Toolbox The dialog will appear. To return to the main window, you need to re-enter the admin's password again. Settings: The settings dialog will pop up when you click the "Settings" button. click on the "Exit" button. D-Link DCS-5220 User Manual 106 - D-Link DCS-5220 | User Manual - Page 107
the DCS-5220 Internet Camera can serve as a security device by recording only when motion is detected. Note: These settings can be configured in your Web browser and while logged into the IP activity display. You can add up to 3 motion windows to trigger recording. D-Link DCS-5220 User Manual 107 - D-Link DCS-5220 | User Manual - Page 108
DCS-5220 With an Internet Browser" (page 29). Next, run the IP surveillance program. Click on the Configurations button and select Scheduler. In the Primary Schedule you can choose either Once (for one time either the Primary Schedule or Secondary Schedule, or both. D-Link DCS-5220 User Manual 108 - D-Link DCS-5220 | User Manual - Page 109
to save this configuration, click Save As to save this configuration to a folder in your hard drive. This configuration can be used on another system running IP surveillance or can be used as a backup if you need to re-install the IP surveillance software program. D-Link DCS-5220 User Manual 109 - D-Link DCS-5220 | User Manual - Page 110
Section 4 - Security Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DCS5220 offers the following types of security: • WPA-PSK (Pre can be defined so that you can change keys easily. D-Link DCS-5220 User Manual 110 - D-Link DCS-5220 | User Manual - Page 111
or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point. D-Link DCS-5220 User Manual 111 - D-Link DCS-5220 | User Manual - Page 112
the Password is defined, only the Administrator has access to the management of the Internet Camera. This procedure should be done as soon as possible since the security features of the Internet Camera will not be enabled until the Administrator Password is defined. D-Link DCS-5220 User Manual 112 - D-Link DCS-5220 | User Manual - Page 113
to Enable Remote Image Viewing This section is designed to walk you through the setup process for installing your camera behind a router and enable remote video viewing. For the basic setup of the DCS-5220, follow the steps outlined in the Quick Installation Guide. D-Link DCS-5220 User Manual 113 - D-Link DCS-5220 | User Manual - Page 114
allow remote viewing of the camera over the Internet. 1 Assign a Local IP Address to Your Camera Run the DCC program from the CD included with the DCS-5220. Follow the steps in the Quick Installation Guide to configure the DCS-5220. The camera will be assigned a local IP Address that allows it to be - D-Link DCS-5220 | User Manual - Page 115
are able to view this screen from any PC running Internet Explorer on your LAN. Click on the Setup button on the left side of the display. Scroll to the bottom of the Network Setup page (see page 24) to display the ports used by HTTP and Streaming audio and video. D-Link DCS-5220 User Manual 115 - D-Link DCS-5220 | User Manual - Page 116
can be changed if they are already in use by other devices (e.g. in a multiple camera environment). Note: Ports 5556 - 5559, and both HTTP port and RTSP port are required to be opened for the DCS-5220. Please refer to page 112 on how to open ports in the router. D-Link DCS-5220 User Manual 116 - D-Link DCS-5220 | User Manual - Page 117
it to access the Internet. To find out what your router's WAN IP Address is, go to the Status menu on your router and locate the WAN information for your router (as shown on the next Your WAN IP Address will be listed on the router's Status > Device Info page. D-Link DCS-5220 User Manual 117 - D-Link DCS-5220 | User Manual - Page 118
) for RTSP and both (TCP and UDP) for 5556 - 5559 ports. 5 If you are using the default camera port settings, enter 80 into the Public and Private Port section, click Apply. 6 Scheduling should be set to Always so that the camera images can be accessed at any time. D-Link DCS-5220 User Manual 118 - D-Link DCS-5220 | User Manual - Page 119
are the same, so refer to your user manual for specific instructions on how to open ports. Enter valid ports in the Virtual Server section of your router. Please make sure to check the box next to the camera name on the Virtual Server List to enable your settings. D-Link DCS-5220 User Manual 119 - D-Link DCS-5220 | User Manual - Page 120
Name of the RTSP protocol. To enter the RTSP streaming address, please follow this format: rtsp://ip address of the camera/live.sdp. To enable mobile device video streaming, you will need to select Configure for mobile viewing (see sample screenshot to the right). D-Link DCS-5220 User Manual 120 - D-Link DCS-5220 | User Manual - Page 121
Section 4 - Security Play from RealPlayer The following steps are based on a Nokia 6630 cell phone. Press the Menu button and select Media Select Open Select RealPlayer D-Link DCS-5220 User Manual 121 - D-Link DCS-5220 | User Manual - Page 122
Section 4 - Security Select Open When RealPlayer opens, press Options D-Link DCS-5220 User Manual 122 - D-Link DCS-5220 | User Manual - Page 123
Section 4 - Security Select Download Select Video Clips Note: 71.34.50.5 is the camera's IP address in this sample. Press Options D-Link DCS-5220 User Manual 123 - D-Link DCS-5220 | User Manual - Page 124
Section 4 - Security Select Navigation Options Select Go to web address Input your rtsp address D-Link DCS-5220 User Manual 124 - D-Link DCS-5220 | User Manual - Page 125
Section 4 - Security Press Yes, and allow Connection and Loading of the streaming video. Enjoy streaming video on your cellphone. D-Link DCS-5220 User Manual 125 - D-Link DCS-5220 | User Manual - Page 126
Section 4 - Security Play from PVPlayer Press the Menu button and select PVPlayer Select Open Press the Options button D-Link DCS-5220 User Manual 126 - D-Link DCS-5220 | User Manual - Page 127
Section 4 - Security Select Open location Input your rtsp address Note: 71.34.50.5 is the camera's IP address in this sample. D-Link DCS-5220 User Manual 127 - D-Link DCS-5220 | User Manual - Page 128
Section 4 - Security Enjoy streaming video on your cellphone. D-Link DCS-5220 User Manual 128 - D-Link DCS-5220 | User Manual - Page 129
? The Internet Camera uses Category 5 UTP cable allowing 10 Base-T and 100 Base-T networking. 7. Can the Internet Camera be setup as a PC-cam on a computer? No, the DCS-5220 Internet Camera is used only on a wireless 802.11b/g, Ethernet, or Fast Ethernet network. D-Link DCS-5220 User Manual 129 - D-Link DCS-5220 | User Manual - Page 130
Section 5 - Troubleshooting 8. Can the DCS-5220 be connected to the network if it consists of only private IP addresses? Yes, the Internet Camera can be connected to a LAN with private IP addresses. 9. Can the DCS-5220 be installed and work if a firewall exists on the network? If a firewall exists - D-Link DCS-5220 | User Manual - Page 131
running the Installation Wizard: This Windows error will occur if the Internet Camera is connected to a computer that is not properly configured with a valid IP address. Turn off DHCP from the Network Settings in Windows® and configure the computer with a valid IP address, or connect the camera to - D-Link DCS-5220 | User Manual - Page 132
users. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. D-Link DCS-5220 User Manual - D-Link DCS-5220 | User Manual - Page 133
connect computers anywhere in your home or office network. Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link . D-Link DCS-5220 User Manual 133 - D-Link DCS-5220 | User Manual - Page 134
not just at home or office. People like the freedom of mobility and it's becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called "hotspots". D-Link DCS-5220 User Manual 134 - D-Link DCS-5220 | User Manual - Page 135
on same frequency. Security Don't let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up. D-Link DCS-5220 User Manual 135 - D-Link DCS-5220 | User Manual - Page 136
Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DCS-5220 User Manual 136 - D-Link DCS-5220 | User Manual - Page 137
Some firewall software programs may block a DHCP request on newly installed adapters. If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network settings. D-Link DCS-5220 User Manual 137 - D-Link DCS-5220 | User Manual - Page 138
Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DCS-5220 User - D-Link DCS-5220 | User Manual - Page 139
and User Group Protected • Password Authentication IP Surveillance Software • Remotely Manage and Control up to 16 DCS-5220 Internet Cameras • View Up to 16 Cameras on one screen • Supports all Management Functions Provided in Web Interface • Scheduled Motion Triggered, or Manual Recording - D-Link DCS-5220 | User Manual - Page 140
by magnifying the pixels in a selected portion of the image by 4 times. Maximum wireless signal rate derived from IEEE Standard 802.11b/g specifications. Actual data throughput data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link DCS-5220 User Manual 140
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
 |
 |
