D-Link DCS-6620 Product Manual - Page 39
Configuration > Advanced > Network, General Settings - reset d link
UPC - 790069277078
View all D-Link DCS-6620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
DCS-6620 User's Manual Using the DCS-6620 with an Internet Browser Configuration > Advanced > Network Reset IP Address at next boot Once the DCS-6620 is configured, this box should be unchecked at all times. If the box has been checked and the connection is lost, run Installation Wizard to find the camera's IP address. General Settings IP address: Subnet mask: Default router: Primary DNS: Secondary DNS: SMTP 1st SMTP (mail) server: Necessary for network identification. Used to determine if the destination is in the same subnet. The default value is "255.255.255.0." The router used to forward frames to destinations in a different subnet. Invalid router settings may cause the failure of transmissions to a different subnet. Primary domain name server that translates names to IP addresses. Secondary domain name server to backup the primary one. The domain name or IP address of external mail server. 1st SMTP account name: The user name used to log into your e-mail account (e.g. jdoe or [email protected] depending on your ISP). 1st SMTP password: 1st recipient e-mail address: 2nd SMTP(mail) server: 2nd SMTP account name: The password used to log into your e-mail account. (The password will appear as dots instead of entered characters.) The e-mail address of recipients for snapshots or a system log file. Multiple recipients must be separated by a semicolon ";" The domain name or IP address of a secondary mail server used only if the primary mail server is unreachable. The user name for the second SMTP server. 2nd SMTP password: The password used to log into the second e-mail account. (The password will appear as dots instead of entered characters.) D-Link Systems, Inc. 39