D-Link DCS-6620 Product Manual - Page 40
Configuration > Advanced > Network, FTP Settings - dcs connection failed
UPC - 790069277078
View all D-Link DCS-6620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
DCS-6620 User's Manual Using the DCS-6620 with an Internet Browser Configuration > Advanced > Network (continued) 2nd recipient e-mail address: The e-mail address of recipients for the secondary server. Sender e-mail address: FTP Settings The return e-mail address to use if the snapshot or system log e-mail fails to send. (This address should be within the SMTP server's domain for authentication purposes.) Local FTP server port: 1st FTP server: 1st FTP server port: 1st FTP user name: 1st FTP password: Can be other than default port 21. If you find that you want to change the port to a port number other than 21, you will need to specify the port when connecting to the FTP server. For example FTP://68.5.1.81:60 (if you are to use port 60 for your FTP server port) The domain name or IP address of the external FTP server. The following user settings must be correctly configured for remote access. The port to access the external FTP server. Granted user name on the external FTP server. Granted password on the external FTP server. 1st FTP remote folder: 1st FTP passive Mode: 2nd FTP server: 2nd FTP server port: Granted folder on the external FTP server. The string must conform to the external FTP server. Some FTP servers cannot accept a preceding slash symbol before the path if there is no virtual path mapping. Refer to the instructions of the external FTP server for details. The folder privilege must be open for upload. If the DCS-6620 is located inside a network that is protected by a firewall, a data connection for FTP may be prohibited. Passive mode FTP can bypass this rule and allow the uploading of snapshots. If the passive mode is selected, the DCS-6620 can automatically attempt to upload in active mode if the external FTP server does not support passive mode. The domain name or IP address of the external FTP server. Note that the 2nd FTP server will only be used if the 1st FTP is unavailable. If image upload to the 1st FTP is successful, no attempts will be made to connect to the 2nd FTP server. The port to access the backup FTP server. D-Link Systems, Inc. 40