D-Link DCS-6620 Product Manual - Page 63

DCS-6620 User's Manual Record Snapshots to your FTP server with Motion Detection Record Snapshots to your FTP server with Motion Detection Administrators can combine options on the application page to perform many useful security tasks. There are two trigger sources available: from an external sensor or with built-in motion detection. There are also two kinds of actions that can respond to these events that include uploading snapshots over the internet and driving attached devices. To upload the snapshots, users can choose either e-mail or FTP according to user's needs. Both e-mail and FTP use the network settings on the network page. This section describes how to enable motion detection and record snapshots to an FTP server. If no external sensor is available, administrators can utilize the built-in motion detection to monitor any abnormal movement and then record the snapshots to an FTP or SMTP server. Click the Motion Detection button under the Advanced tab from the Configuration screen to access settings that affect how the DCS-6620 PTZ Internet Camera can serve as a security device by recording only when motion is detected. Click Motion Detection In this window, follow the steps below to ensure that motion detection is correctly enabled:  Check "Enable motion detection."  Click on "New" to have a new window to monitor video.  Enter in a window name.  Adjust the "Sensitivity" and "Percentage" levels according to the local environment. The highest sensitivity and lowest percentage provides the most sensitive setting.  Click on save to enable the activity display. D-Link Systems, Inc. 63