D-Link DCS-6620 Product Manual - Page 86
Modulation Mode, DCS-6620, Display Options
UPC - 790069277078
View all D-Link DCS-6620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
DCS-6620 User's Manual Using IP surveillance Software Monitor Program (continued) Modulation Mode You must select the input signal format (NTSC or PAL) for displaying the original resolution of video stream from DCS-6620. If you are not sure which format to select, then leave the input signal format at it's default (NTSC). NOTE: You need to select the input signal format according to the camera type or CCD module type that is connected to the DCS-6620. Display Options: In the video displaying frame of each channel, there are two status bars. The upper bar contains "Camera location" and "time of the remote site." The lower bar contains "Connection time" and "Recording time." All of them, shown in the figure below, can be enabled or disabled here individually for the status indication. Apply to full screen mode can also be turned on here. Once it has been checked, the status bar in each channel showing date, location, connection, and recording time will be shown in both display frame mode and full screen mode. Location (channel number + camera name) Remote Time Connection Time (Day:Hour:Min) 0 day 00:01 Recording Time (Day:Hour:Min) D-Link Systems, Inc. 86