D-Link DCS-6620 Product Manual - Page 9
Hardware Installation - d link dcs manual
UPC - 790069277078
View all D-Link DCS-6620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
DCS-6620 User's Manual Hardware Installation Hardware Installation 1 Connect an Ethernet cable Connect an Ethernet cable to the network cable connector located on the DCS-6620's back panel and attach it to the network. 2 Attach the external power supply Attach the external power supply to the DC power input connector located on the DCS-6620's back panel labeled 12V and connect the other end to your wall outlet. Power LED LED stands for Light-Emitting Diode. The Power LED is positioned in the center of the PTZ Internet Camera base. As soon as the power adapter is connected to the PTZ Internet Camera, the power and the activity LED will flash red and green several times. The DCS-6620 is conducting a self-test. Upon passing the self-test, the red LED will be solid and the green LED will start to blink to indicate a good connection to an Ethernet port. If you are directly connected to the camera via a crossover cable, the light may cycle on and off and your computer may show an intermittent loss of connectivity. This is normal until you have configured your PTZ Internet Camera. The absence of a blinking green LED indicates no connection has been made. Attaching the PTZ Internet Camera to the Camera Stand The PTZ Internet Camera comes with a camera stand and a swivel ball screw head that can be attached to the PTZ Internet Camera bottom socket cavity. Attach the camera stand to the PTZ Internet Camera and station it for your application. There is a hole located in the base of the camera stand allowing the PTZ Internet Camera to be mounted to the ceiling, or any wall securely. D-Link Systems, Inc. 9