D-Link DCS-6620 Product Manual - Page 95
DI/DO Control, P/T Control
UPC - 790069277078
View all D-Link DCS-6620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
DCS-6620 User's Manual Using IP surveillance Software Monitor Program (continued) IP surveillance includes pan/tilt control, DI/DO (Digital Input / Digital Output) control, and an alert message receiver. Each of these are described in detail below. P/T Control Refer to the following figure to use the pan and tilt controls. Return to home position. Tilt/navigate camera using arrows. Pan - Pans the camera one full cycle. Stop - Stops movement of the camera during pan. Patrol - Enables the Auto Patrol feature. Pull down menu - Select a preset position to move the camera to. DI/DO Control Clicking on the "DI/DO" button shown below, you can switch to the DI/DO controls. The color of the channel number indicates the status of the camera's DI (Digital Input). You can click the "Switch button" to change the HI/LOW state of the DO (Digital Output). With these features, you can monitor the remote sensor input from DI and also trigger the camera by DO switch. Set digital output to LOW Set digital output to HIGH No connection When the color of a DI/DO number is gray, that means the video has not yet been connected to a camera. D-Link Systems, Inc. 95