D-Link DCS-932L Product Manual - Page 31
Save Settings - email
UPC - 790069351129
View all D-Link DCS-932L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Section 4 - Web Configuration Mail This section allows you to configure the email notification settings for your camera. SMTP Server This is the domain name or IP address of your external e-mail server. Address: Sender e-mail This is the e-mail address of the person sending the camera snapshots. Address: Receiver e-mail This is the e-mail address of the recipient. Address: User Name: If the SMTP server uses authentication, you must enter your user name here. Password: This is the password that corresponds to your user name to connect to the SMTP server. For example, if you want to use Gmail by SSL-TLS for the e-mail notification, you can follow the setup procedure as below: Step 1 - Enter "smtp.gmail.com" in SMTP Server Address. Step 2 - Change the SMTP server port number from 25 to 465. Step 3 - Enter your gmail E-mail address in Sender E-mail Address. Step 4 - Enter the destination E-mail address in Receiver E-mail Address. Step 5 - Enter the user name required to access the SMTP server. Step 6 - Enter the password required to access the SMTP server. Step 7 - Select SSL-TLS and then click Save Settings. Step 8 - Click the Test button to send a test e-mail will be sent to the e-mail account listed above. Note: You can also use STARTTLS which will use SMTP server port number 587. Note: If you want to use the Yahoo SMTP server, the SMTP server address will be different between each registered region. And it only supports the SMTP server port number 465 for the SSL-TLS. D-Link DCS-932L User Manual 31