D-Link DES-1050G User Manual - Page 10
Front-Panel Components - 48 port 10 100 unmanaged switch
View all D-Link DES-1050G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
D-Link DES-1050G Unmanaged Layer 2 Ethernet Switch • Auto-negotiation (NWay) between 10Mbps/100Mbps, half-duplex or full duplex for 10/100BASE-T ports Ports • Forty-eight high-performance NWay Fast Ethernet ports, all of which operate at 10/100 Mbps for connections to end stations, servers, and hubs. All ports can auto-negotiate between 10Mbps or 100Mbps and full or half duplex • Two 10/100/1000BASE-T ports for connecting to another switch, server or network backbone Front-Panel Components The front panel of the Switch consists of LED indicators, 48 (10/100 Mbps) Fast Ethernet ports and two indicators for the 10/100/1000BASE-T ports. Figure 1-1. Front Panel View of the switch Comprehensive LED indicators display the status of the switch and the network. LED Indicators The LED indicators of the Switch include Power and Link/Act. The following shows the LED indicators for the Switch along with an explanation of each indicator. Figure 1-2. LED Indicators Power Link/Act This indicator on the front panel should be lit during the Power-On Self Test (POST). It will light green approximately 2 seconds after the switch is powered on to indicate the ready state of the device. Each on-board port has a corresponding indicator. This will light steady green for a valid link and blink whenever there is reception or transmission (i.e. Activity--Act) of data occurring at a port. 3