D-Link DES-3350SR Reference Manual
D-Link DES-3350SR Manual
 |
UPC - 790069254499
View all D-Link DES-3350SR manuals
Add to My Manuals
Save this manual to your list of manuals |
D-Link DES-3350SR manual content summary:
- D-Link DES-3350SR | Reference Manual - Page 1
DES-3350SR Layer 3 Switch Command Line Interface Reference Manual First Edition (August 2003) 6ES3350SRC01 Printed In Taiwan RECYCLABLE - D-Link DES-3350SR | Reference Manual - Page 2
sind. 5. Das Gerät is vor Feuchtigkeit zu schützen. 6. Bei der Aufstellung des Gerätes ist auf sichern Stand zu achten. Ein Kippen oder Fallen könnte Verletzungen 17. Wenden Sie sich mit allen Fragen die Service und Repartur betreffen an Ihren Servicepartner. Somit stellen Sie - D-Link DES-3350SR | Reference Manual - Page 3
18. Zum Netzanschluß dieses Gerätes ist eine geprüfte Leitung zu verwenden, Für einen Nennstrom bis 6A und einem Gerätegewicht grőßer 3kg ist eine Leitung nicht leichter als H05VV-F, 3G, 0.75mm2 einzusetzen. - D-Link DES-3350SR | Reference Manual - Page 4
90) days of purchase. A list of D-Link offices is provided at the back of this manual, together with a copy of the Registration Card. If the product proves defective within the applicable warranty period, D-Link will provide repair or replacement of the product. D-Link shall have the sole discretion - D-Link DES-3350SR | Reference Manual - Page 5
handling charge in addition mailing or shipping costs. Software: Warranty service for software products may be obtained by contacting a D-Link office within the applicable warranty period. A list of D-Link offices is provided at the back of this manual, together with a copy of the Registration Card - D-Link DES-3350SR | Reference Manual - Page 6
absolutely error-free, and no warranty that all defects in the software product, within or without the scope of D-Link's applicable product documentation, will be corrected. - D-Link DES-3350SR | Reference Manual - Page 7
manual, must be sent to a D-Link office. To obtain an RMA number for warranty service as to a hardware product, or to obtain warranty service as to a software product, contact the D-Link installed and used in accordance with this user's guide, may cause harmful interference to radio communications - D-Link DES-3350SR | Reference Manual - Page 8
VCCI Warning BSMI Warning - D-Link DES-3350SR | Reference Manual - Page 9
28 Switch Port Commands 48 Network Management Commands 52 Download/Upload Commands 88 Network Monitoring Commands 92 Spanning Tree Commands 100 Forwarding Database Commands 111 Broadcast Storm Control Commands 123 QOS Commands 127 Port Mirroring Commands 146 VLAN Commands 152 Link - D-Link DES-3350SR | Reference Manual - Page 10
(ACL) Commands 252 BOOTP Relay Commands 268 DNS Relay Commands 275 RIP Commands 285 DVMRP Commands 294 PIM Commands 303 IP Multicasting Commands 310 MD5 Configuration Commands 314 OSPF Configuration Commands 319 SNTP Commands 355 Command History List 360 Technical Specifications 366 - D-Link DES-3350SR | Reference Manual - Page 11
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 1 INTRODUCTION The switch can be managed through the switch's serial port, Telnet, or the Web-based management agent. The Command Line Interface (CLI) can be used to configure and manage the switch via the serial port or Telnet interfaces. This - D-Link DES-3350SR | Reference Manual - Page 12
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide With the serial port properly connected to a management or password. Just press the Enter key twice to display the CLI input cursor − local>. This is the command line where all commands are input. Setting the Switch's IP Address Each Switch must - D-Link DES-3350SR | Reference Manual - Page 13
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide The switch is also assigned a unique MAC address by the factory. This MAC address cannot be changed, and can be found from the initial boot console screen - shown below. Figure 1-2. Boot Screen The switch's MAC address can also be found from the - D-Link DES-3350SR | Reference Manual - Page 14
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide represent the IP address to be assigned to the IP interface named System and the y's represent the corresponding subnet mask. 2. Alternatively, you can enter config - D-Link DES-3350SR | Reference Manual - Page 15
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide via Telnet and the CLI or via the Web-based management agent using the above IP address to connect to the switch. 15 - D-Link DES-3350SR | Reference Manual - Page 16
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 2 USING THE CONSOLE CLI The DES-3350SR supports a console management interface that allows the user to connect to the switch program can be used to configure the switch to use an SNMP-based network management software over the network. This chapter - D-Link DES-3350SR | Reference Manual - Page 17
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide terminal emulator program (e.g., the HyperTerminal program included with the Windows operating system) using an RS-232C serial cable. Your terminal parameters will need to be - D-Link DES-3350SR | Reference Manual - Page 18
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Figure 2-1. Initial Console Screen Commands are entered at the command prompt, local>. There are a number of helpful features included in the CLI. Entering the ? command will display a list of all of the top-level commands. 18 - D-Link DES-3350SR | Reference Manual - Page 19
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Figure 2-2. The ? Command The dir command has the same function as the ? command. When you enter a command without its required parameters, the CLI will prompt - D-Link DES-3350SR | Reference Manual - Page 20
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Figure 2-3. Example Command Parameter Help In this case, the command config account was entered with the parameter . The CLI will then prompt you to - D-Link DES-3350SR | Reference Manual - Page 21
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Figure 2-4. Using the Up Arrow to Re-enter a Command this way. In addition, the syntax of the help prompts are the same as presented in this manual − angle brackets < > indicate a numerical value or character string, braces { } indicate optional - D-Link DES-3350SR | Reference Manual - Page 22
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Figure 2-5. The Available Commands Prompt The top-level commands consist of commands like show or config. Most of these commands require one or more parameters - D-Link DES-3350SR | Reference Manual - Page 23
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Figure 2-6. Next possible completions: Show Command In the above example, all of the possible next parameters for to re-enter the show command, followed by the account parameter. The CLI then displays the user accounts configured on the switch. 23 - D-Link DES-3350SR | Reference Manual - Page 24
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 3 COMMAND SYNTAX The following symbols are used to describe how command entries are made and values and arguments are specified in this manual. The online help contained in the CLI and available through the console interface uses the same syntax. - D-Link DES-3350SR | Reference Manual - Page 25
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide [square brackets] Purpose Encloses a required value or set of required arguments. One or more values or arguments can be specified. Syntax create account [admin|user] Description In the above syntax example, you must specify either an admin - D-Link DES-3350SR | Reference Manual - Page 26
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide {braces} Purpose Syntax Description Example command Encloses an optional value or set of optional arguments. config serial_port {baud_rate[9600|19200|38400|115200] | auto_logout [never|2_minutes| - D-Link DES-3350SR | Reference Manual - Page 27
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Line Editing Key Usage Tab Shifts the cursor to the next field to the left. Multiple Page Display Control Keys Space Displays the next page. - D-Link DES-3350SR | Reference Manual - Page 28
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 4 BASIC SWITCH COMMANDS The basic switch commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create account config account show account - D-Link DES-3350SR | Reference Manual - Page 29
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command disable web save reboot reset login logout Parameters {config|system} Each command is listed, in detail, in the following sections. create account Purpose Used to create user accounts Syntax create account [admin|user] - D-Link DES-3350SR | Reference Manual - Page 30
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create account characters. Example Usage: To create an administrator-level user account with the username "dlink". local>create account admin dlink Command: create account admin dlink Enter a case-sensitive new password:**** Enter the new - D-Link DES-3350SR | Reference Manual - Page 31
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config account characters. Passwords can be between 0 15 characters. Example Usage: To configure the user password of "dlink" account: local>config account dlink Command: config account dlink Enter a old password:**** Enter a case-sensitive new - D-Link DES-3350SR | Reference Manual - Page 32
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: To display the accounts which have been created: local>show account Command: show account Current Accounts: Username Access Level ------------ dlink Admin local> delete account Purpose Used to delete an existing user - D-Link DES-3350SR | Reference Manual - Page 33
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Success. local> show session Purpose Used to display a list of currently logged-in users. Syntax show session Description This command displays a list of all the users that are logged-in at the time the command is issued. Parameters none - D-Link DES-3350SR | Reference Manual - Page 34
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show switch Purpose Used to display information about the switch. Syntax show switch Description This command displays information about the switch. Parameters none. Restrictions none. Example Usage: To display the switch information: - D-Link DES-3350SR | Reference Manual - Page 35
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide System Contact Spanning Tree GVRP IGMP Snooping RIP DVMRP PIM-DM OSPF TELNET SNTP local> : : Disabled : Disabled : Disabled : Disabled : Disabled : Disabled : Disabled : Enabled (TCP 23) : Disabled show serial_port Purpose - D-Link DES-3350SR | Reference Manual - Page 36
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Parity Bits : None Stop Bits : 1 Auto-Logout : 10 mins local> 36 - D-Link DES-3350SR | Reference Manual - Page 37
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config serial_port Purpose Used to configure the serial port. Syntax config serial_port {baud_rate[9600|19200|38400|115200]|auto _logout [never|2_minutes|5_minutes|10_minutes| 15_minutes]} Description This command is used to configure the - D-Link DES-3350SR | Reference Manual - Page 38
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: To configure baud rate: local>config serial_port baud_rate 9600 Command: config serial_port baud_rate 9600 Success. local> enable clipaging Purpose Used to pause the scrolling of the console - D-Link DES-3350SR | Reference Manual - Page 39
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide To enable pausing of the screen display when would display more than one screen of information. Parameters none. Restrictions Only administrator-level users can issue this command. Example Usage: To disable pausing of the screen display when - D-Link DES-3350SR | Reference Manual - Page 40
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>disable clipaging Command: disable clipaging Success. local> enable telnet Purpose Used to enable communication with and management of the switch using the Telnet protocol. Syntax enable telnet Description - D-Link DES-3350SR | Reference Manual - Page 41
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command: enable telnet 23 Success. local> disable telnet Purpose Used to disable the Telnet protocol on the switch. Syntax disable telnet Description This command is used to disable the Telnet protocol on the switch. Parameters none. - D-Link DES-3350SR | Reference Manual - Page 42
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide enable web Purpose Used to enable the HTTP-based management software on the switch. Syntax enable web Description This command is used to enable the Webbased management software on the switch. The user can specify - D-Link DES-3350SR | Reference Manual - Page 43
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide disable web Purpose Used to disable the HTTP-based management software on the switch. Syntax disable web Description This command disables the Web-based management software on the switch. Parameters none. Restrictions Only administrator - D-Link DES-3350SR | Reference Manual - Page 44
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide save The saved switch configuration will be loaded into the switch's memory each time the switch is restarted. Parameters none. Restrictions Only administrator-level users can issue this command. Example Usage: To save the switch's current - D-Link DES-3350SR | Reference Manual - Page 45
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: To restart the switch: local>reboot Command: reboot Are you sure want to proceed with the system reboot? (y|n) Please wait, the switch is rebooting... reset Purpose Syntax Description Parameters Used to reset the switch to the - D-Link DES-3350SR | Reference Manual - Page 46
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide reset Restrictions Only administrator-level users can issue this command. Example Usage: To restore all of the switch's parameters to their default values: local>reset config Command: reset config Success. local> login Purpose Syntax - D-Link DES-3350SR | Reference Manual - Page 47
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide To initiate the login procedure: local>login Command: login UserName: logout Purpose Syntax Description Parameters Restrictions Used to log out a user from the switch's console. logout This command terminates the current user's session on the - D-Link DES-3350SR | Reference Manual - Page 48
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 5 SWITCH PORT COMMANDS The switch port commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config ports show ports Parameters < - D-Link DES-3350SR | Reference Manual - Page 49
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config ports [auto|10_half|10_full|100_half|100_full| 1000_half|1000_full] state [enabled|disabled]} Description This command allows for the configuration of the switch's Ethernet ports. Only the ports listed in the will be - D-Link DES-3350SR | Reference Manual - Page 50
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: To configure the speed of port 3 to be 10 Mbps, full duplex, learning and state enabled: local>config ports 1-3 speed 10_full state enabled Command: config ports 1-3 speed - D-Link DES-3350SR | Reference Manual - Page 51
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: To display the configuration of the ports 1-7: local>show ports 1-7 Command: show ports 1-7 Auto Auto Auto Auto Auto Auto Auto Connection Speed|Duplex Link Down Link Down Link Down Link Down Link Down Link Down Link Down 51 - D-Link DES-3350SR | Reference Manual - Page 52
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 6 NETWORK MANAGEMENT COMMANDS The network management commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create snmp community delete snmp community create snmp user - D-Link DES-3350SR | Reference Manual - Page 53
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command Parameters delete snmp view show snmp view config snmp engineID show snmp engineID create snmp group delete snmp group create snmp host delete snmp - D-Link DES-3350SR | Reference Manual - Page 54
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command Parameters disable snmp authenticate traps create trusted_host show trusted_host delete trusted_host show snmp ping traceroute show ipfdb community {} engine ID groups host user - D-Link DES-3350SR | Reference Manual - Page 55
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create snmp community [read_only|read_write] Description This − An alphanumeric string of up to 32 characters used to authentication of users wanting access to the switch's SNMP agent. view_name − An alphanumeric string of up to 32 characters - D-Link DES-3350SR | Reference Manual - Page 56
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide To create a read-write level SNMP community "dlink": local>create snmp community dlink view CommunityView read_write Command: create snmp community dlink view CommunityView read_write Success. local> delete snmp community Purpose Used to - D-Link DES-3350SR | Reference Manual - Page 57
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>delete snmp community dlink Command: delete snmp community dlink Success. local> create snmp user Purpose Used to create a new SNMP user to an SNMP group that is also created by this command. Syntax create snmp user < - D-Link DES-3350SR | Reference Manual - Page 58
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create snmp user appears in encrypted format. by_password − Indicates input password for authentication and privacy. by_key − Indicates input key for authentication and privacy. auth [md5|sha] - Initiate an authentication-level setting - D-Link DES-3350SR | Reference Manual - Page 59
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>create snmp user dlink D-Link_group encrypted by_password auth md5 12345678 priv des 12345678 Command: create snmp user dlink D-Link_group encrypted by_password auth md5 12345678 priv des 12345678 Success. local> delete snmp user Purpose - D-Link DES-3350SR | Reference Manual - Page 60
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>delete snmp user dlink Command: delete snmp user dlink Success. local> create to be created. − Object-Identified tree, MIB tree. view_type − Specifiy the access type of the MIB tree in the view. included − Includes for this view - D-Link DES-3350SR | Reference Manual - Page 61
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: To create an SNMP view: local>create snmp view − View name of the user who will be deleted. all − All view records. − Object-Identified tree, MIB tree. Restrictions Only administrator-level users can issue this command. - D-Link DES-3350SR | Reference Manual - Page 62
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide To delete an SNMP view: local>delete snmp view view record. Parameters − View name of the user you would like to show. Restrictions Only administrator-level users can issue this command. Example Usage: To show an SNMP view - D-Link DES-3350SR | Reference Manual - Page 63
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide restricted restricted restricted restricted restricted CommunityView CommunityView CommunityView Total Entries: 8 local> local> 1.3.6.1.2.1.1 1.3.6.1.2.1.11 1.3.6.1.6.3.10.2.1 1.3.6.1.6.3.11.2.1 1.3.6.1.6.3.15.1.1 1 1.3.6.1.6.3. 1.3.6.1.6.3.1 - D-Link DES-3350SR | Reference Manual - Page 64
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide To configure an SNMP engine on the switch: local>config snmp engineID 1023457890 Command: config snmp engineID 1023457890 Success. local> show snmp engineID Purpose Used to display the identification of the SNMP engine on the switch D-Link is - D-Link DES-3350SR | Reference Manual - Page 65
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide To display an SNMP engine on the switch: local>show snmp engineID Command: show snmp engineID SNMP Engine ID : 1023457890 local> create snmp group Purpose Used to create a new SNMP group, or a table that maps SNMP users to SNMP views. Syntax - D-Link DES-3350SR | Reference Manual - Page 66
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create snmp group auth_nopriv − Specifies support for packet authentication. auth_priv − Specifies support for packet authentication and encrypting. − View name, the MIB view. Restrictions Only administrator-level users can - D-Link DES-3350SR | Reference Manual - Page 67
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide delete snmp group an SNMP group. Parameters − An alphanumeric name of up to 32 characters that will identify the SNMP group that will be deleted. Restrictions Only administrator-level users can issue this command. Example - D-Link DES-3350SR | Reference Manual - Page 68
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create snmp host v1 − The least secure of the possible security models. v2c − The second least secure of the possible security models. v3 − The most secure of the possible security models. noauth_nopriv − Specifies neither support for packet - D-Link DES-3350SR | Reference Manual - Page 69
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide delete snmp host Purpose Used to delete a recipient of an SNMP trap operation. Syntax delete snmp host Description The delete snmp host command deletes a - D-Link DES-3350SR | Reference Manual - Page 70
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show snmp host Description This show snmp host hosts will be displayed. Restrictions Only administrator-level users can issue this command. Example Usage: To display an SNMP engine on the switch: local>show snmp host Command: show snmp - D-Link DES-3350SR | Reference Manual - Page 71
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide enable rmon Syntax enable rmon Description This command is used, in conjunction with the disable RMON command below, to enable and disable remote monitoring (RMON) on the switch. Parameters none. Restrictions Only administrator-level - D-Link DES-3350SR | Reference Manual - Page 72
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide disable rmon Parameters none. Restrictions Only administrator-level users can issue this command. Example Usage: To disable RMON: local>disable rmon Command: disable rmon Success. local> config snmp system_contact Purpose Used to enter - D-Link DES-3350SR | Reference Manual - Page 73
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config snmp system_contact person who is responsible for the switch. Restrictions Only administrator-level users can issue this command. Example Usage: To configure the switch contact to "ctsnow": . local>config snmp system_contact ctsnow - D-Link DES-3350SR | Reference Manual - Page 74
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config snmp system_location this command. Example Usage: To configure the switch location for "Rota": . local>config snmp system_location Rota Command: config snmp system_location Rota Success. local> config snmp system_name Purpose Used to - D-Link DES-3350SR | Reference Manual - Page 75
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>config snmp system_name DES3350 Command: config snmp system_name DES3350 Success. local> enable snmp traps Purpose Used to enable SNMP trap support. Syntax enable snmp traps Description This command is used to enable SNMP trap - D-Link DES-3350SR | Reference Manual - Page 76
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide disable snmp traps Purpose Used to disable SNMP trap support on the switch. Syntax enable snmp traps Description This command is used to disable SNMP trap support on the switch. Parameters none. Restrictions Only administrator-level - D-Link DES-3350SR | Reference Manual - Page 77
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide enable snmp authenticate traps Description This command is used to enable SNMP authentication trap support on the switch. Parameters none. Restrictions Only administrator-level users can issue this command. Example Usage: To turn on SNMP - D-Link DES-3350SR | Reference Manual - Page 78
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide disable snmp authenticate traps this command. Example Usage: To turn off SNMP authentication trap support: local>disable snmp authenticate traps Command: disable snmp authenticate traps Success. local> create trusted_host Purpose Used to - D-Link DES-3350SR | Reference Manual - Page 79
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: To create a trusted host: local>create trusted_host Command: create trusted_host 10.1.1.1 Success. local> show trusted_host Purpose Used to display a list of trusted hosts entered on the switch using the create trusted_host - D-Link DES-3350SR | Reference Manual - Page 80
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Management Stations IP Address 10.1.1.1 Total Entries: 1 local Parameters − The IP address of the trusted host. Restrictions Only administrator-level users can issue this command. Example Usage: To delete a trusted host with an IP - D-Link DES-3350SR | Reference Manual - Page 81
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local> show snmp Purpose Used to display various SNMP configuration information entered on the switch. Syntax show snmp [community |engineID|groups|host |user|view] Description This command will display the - D-Link DES-3350SR | Reference Manual - Page 82
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show snmp also displayed. host − This command is used to display the IP addresses and configuration information of remote SNMP managers that are designated as recipients of SNMP traps that are generated by the switch's SNMP agent. − - D-Link DES-3350SR | Reference Manual - Page 83
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Community Name private public View Name IP address will then "echo" or return the message. This is used to confirm connectivity between the switch and the remote device. − The IP address of the remote device. times - D-Link DES-3350SR | Reference Manual - Page 84
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide ping Restrictions timeout − Defines the time-out period while waiting for a response from the remote device. A value of 1 to 99 seconds can be specified. The default is 1 second. Only administrator-level users can issue this command. - D-Link DES-3350SR | Reference Manual - Page 85
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide traceroute Description Parameters Restrictions This command allows you to trace a route between the switch and a given host on the network. − The IP address of the remote device. ttl − The time to live value of the trace route - D-Link DES-3350SR | Reference Manual - Page 86
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 1 show ipfdb Purpose Used − The IP address of the forwarding database. Restrictions Only administrator-level users can issue this command. Example Usage: To show the IP forwarding database table: - D-Link DES-3350SR | Reference Manual - Page 87
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide System System System System local> 10.1.1.101 10.1.1.102 10.1.1.151 10.1.1.154 17 Dynamic 17 Dynamic 17 Dynamic 17 Dynamic 87 - D-Link DES-3350SR | Reference Manual - Page 88
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 7 DOWNLOAD/UPLOAD COMMANDS The download|upload commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command download upload Parameters firmware - D-Link DES-3350SR | Reference Manual - Page 89
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide download Purpose Syntax Description Parameters Restrictions Used to download and install new firmware or a switch configuration file from a TFTP server. download [ firmware |configuration - D-Link DES-3350SR | Reference Manual - Page 90
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide download level users can issue this command. Example Usage: local>download configuration 10.48.74.121 c:\cfg\setting.txt Command: download configuration 10.48.74.121 c:\cfg\setting.txt Connecting to server Done. Download configuration Done. - D-Link DES-3350SR | Reference Manual - Page 91
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide upload Restrictions − The IP address of the TFTP server. The TFTP server must be on the same IP subnet as the switch. − Specifies the location of the switch configuration file on the TFTP server. This file will be - D-Link DES-3350SR | Reference Manual - Page 92
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 8 NETWORK MONITORING COMMANDS The network monitoring commands in the Command Line Interface (CLI) are listed (along with the sections. show packet ports Purpose Used to display statistics about the packets sent and received by the switch 92 - D-Link DES-3350SR | Reference Manual - Page 93
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show packet ports sent and received by the switch. Syntax show packet ports Description This command is used to display statistics about packets sent and received by ports specified in the port list. - D-Link DES-3350SR | Reference Manual - Page 94
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 512-1023 15 1024-1518 0 0 TX Frames 111 2 0 Unicast RX 152 1 Multicast RX 557 2 Broadcast RX 3686 16 CTRL+C ESC q Quit SPACE n Next Page p Previous - D-Link DES-3350SR | Reference Manual - Page 95
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command: show error ports 3 Port number : 3 RX Frames CRC Error 0 Excessive This command will display the real-time port utilization statistics for the switch. Parameters none. Restrictions none. Example Usage: To display the port - D-Link DES-3350SR | Reference Manual - Page 96
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Port ---1 2 3 4 5 6 7 8 9 10 11 12 TX|sec ---------- 0 0 0 0 0 0 0 0 0 0 0 0 RX|sec Util 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Port TX|sec RX|sec Util 13 0 0 0 14 0 0 0 15 0 0 0 16 0 0 - D-Link DES-3350SR | Reference Manual - Page 97
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide clear counters separated by a dash. For example, 3 would specify port 3. 4 specifies port 4. 3-4 specifies all of the ports between port 3 and port 4 − in numerical order.. Restrictions Only administrator-level users can issue this command. - D-Link DES-3350SR | Reference Manual - Page 98
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: To clear the log information: local>clear log Command: clear log Success. local> show log Purpose Syntax Description Parameters Restrictions Used to display the switch history log. show log {index } This command will - D-Link DES-3350SR | Reference Manual - Page 99
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Anonymous) 2 000d00h49m Successful login through Console (Username: Anonymous) 1 000d00h49m Logout through Console (Username: Anonymous) local> 99 - D-Link DES-3350SR | Reference Manual - Page 100
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 9 SPANNING TREE COMMANDS The spanning tree commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config stp ports config stp enable - D-Link DES-3350SR | Reference Manual - Page 101
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command show stp show stp ports Parameters command is used to set up the Spanning Tree Protocol (STP) on the port level. Parameters − Specifies a range of ports to be configured. Ports are specified by entering the lowest - D-Link DES-3350SR | Reference Manual - Page 102
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config stp ports sub-commands listed below. cost 10 Mbps port the default cost is 2,000,000. auto − This instructs the switch to automatically detect the path cost based on the link speed of the port. − This defines a metric - D-Link DES-3350SR | Reference Manual - Page 103
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config stp ports edge [true|false] - true designates not have edge port status. p2p [true|false] - true indicates a point-topoint (p2p) shared link. These are similar to edge ports however they are restricted in that a p2p port must operate in - D-Link DES-3350SR | Reference Manual - Page 104
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config stp Purpose Syntax Description Parameters Used to set up STP on the switch level. config set up the Spanning Tree Protocol (STP) on the switch level. maxage − The maximum amount of time (in seconds) that the switch will wait - D-Link DES-3350SR | Reference Manual - Page 105
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config stp Restrictions the priority. The default is 32,768. version [rstp|stp] - Select the Spanning Tree Protocol version used for the switch. For IEEE 802.1d STP select STP. Select RSTP for IEEE 802.1w Rapid STP. txholdcount - - D-Link DES-3350SR | Reference Manual - Page 106
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide enable stp Syntax Description Parameters Restrictions enable stp This command allows the Spanning Tree Protocol to be globally enabled on the switch. none. Only administrator-level users can issue this command. Example Usage: To enable STP on - D-Link DES-3350SR | Reference Manual - Page 107
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide disable stp Parameters none. Restrictions Only administrator-level users can issue this command. Example Usage: To disable STP on the switch: local>disable stp Command: disable stp Success. local> show stp Purpose Syntax Description - D-Link DES-3350SR | Reference Manual - Page 108
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Status 1: STP enabled: local>show stp Command: show stp STP Status Max Age Hello Time Forward Delay Priority STP Version TX Hold Count Forwarding BPDU : - D-Link DES-3350SR | Reference Manual - Page 109
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Priority : 32768 STP Version : STP compatible TX Hold Count : 3 Forwarding BPDU : Enabled local> show stp ports Purpose Used to display the switch's current perport group STP configuration. Syntax show stp ports Description - D-Link DES-3350SR | Reference Manual - Page 110
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Port ---1 2 3 4 5 6 7 8 9 Designated Bridge State Cost Pri Edge P2P Status Role N/A Yes *200000 128 No Yes Forwarding NonStp N/A Yes *200000 128 No Yes Disabled Disabled N/A Yes * - D-Link DES-3350SR | Reference Manual - Page 111
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 10 FORWARDING DATABASE COMMANDS The forwarding database commands in 32> [add|delete] [add|delete] vlan port |all vlan mac_address 111 - D-Link DES-3350SR | Reference Manual - Page 112
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command aging_time show fdb Parameters port vlan mac_address static aging_time Each command is listed, in detail, in the following sections. create fdb Purpose Syntax Description Parameters Used to create a - D-Link DES-3350SR | Reference Manual - Page 113
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create fdb Restrictions Only administrator-level users can issue this command. will make an entry into the switch's multicast MAC address forwarding database. Parameters − The name of the VLAN on which the MAC address resides - D-Link DES-3350SR | Reference Manual - Page 114
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create multicast_fdb Restrictions Only administrator-level users can issue this command. Example Usage: To create multicast MAC forwarding: local>create multicast_fdb default 01-00-5E-00-00-00 Command: create multicast_fdb default - D-Link DES-3350SR | Reference Manual - Page 115
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config multicast_fdb address to the forwarding table, delete will remove the MAC address from the forwarding table. − Specifies a range of ports to be configured. The port list is specified by listing the beginning port number and the - D-Link DES-3350SR | Reference Manual - Page 116
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide delete fdb Purpose Syntax Description Parameters Restrictions Used to delete an entry to the switch's forwarding database. delete fdb This command is used to delete a previous entry to the switch's MAC address forwarding - D-Link DES-3350SR | Reference Manual - Page 117
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide clear fdb Syntax Description Parameters Restrictions addresses. You can enter a VLAN name and MAC address to delete a specific entry, or skip the MAC address parameter and delete all the entries belonging to a specified VLAN. clear fdb [vlan - D-Link DES-3350SR | Reference Manual - Page 118
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>clear fdb all Command: clear fdb all Success. local> show multicast_fdb Purpose Used to display the contents of the switch's multicast forwarding database. Syntax show multicast_fdb [vlan |mac_address - D-Link DES-3350SR | Reference Manual - Page 119
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide MAC Address : 01-00-5E-00-00-00 Egress Ports : 1-5, 26 Mode are out-of-date or no longer exist. This may cause incorrect packet forwarding decisions by the switch. If the aging time is too short however, many entries may be aged out too soon. - D-Link DES-3350SR | Reference Manual - Page 120
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config fdb aging_time Parameters − The aging time for the MAC address forwarding database value. Restrictions Only administrator-level users can issue this command. Example Usage: To set the fdb aging time: Local>config fdb aging_time - D-Link DES-3350SR | Reference Manual - Page 121
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show fdb Restrictions will always forward traffic to the specified device through this port. − The name of the VLAN on which the MAC address resides. − The MAC address that will be added to the forwarding table. static − - D-Link DES-3350SR | Reference Manual - Page 122
local> DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 122 - D-Link DES-3350SR | Reference Manual - Page 123
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 11 BROADCAST STORM CONTROL COMMANDS The broadcast storm control commands in the Command Each command is listed, in detail, in the following sections. config traffic control Purpose Used to configure broadcast|multicast traffic control. 123 - D-Link DES-3350SR | Reference Manual - Page 124
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config traffic control Syntax config traffic control [|all] broadcast [enabled|disabled]|multicast [enabled|disabled]|dlf [enabled|disabled]|threshold Description This command is used to configure - D-Link DES-3350SR | Reference Manual - Page 125
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: To configure traffic control and state: local>config traffic control 1-3,1-2 broadcast enabled Command: config traffic control 1-3 broadcast enabled Success. local> show traffic control Purpose Used to display - D-Link DES-3350SR | Reference Manual - Page 126
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command: show traffic control Traffic Control Broadcast Multicast Destination Group [ports] Threshold Storm Storm Lookup Fail 1 [ 1 - 8 ] 128 Enabled Disabled Disabled 2 [ 9 - 16] 128 Enabled Disabled Disabled 3 [ - D-Link DES-3350SR | Reference Manual - Page 127
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 12 QOS COMMANDS The MAC address priority commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. - D-Link DES-3350SR | Reference Manual - Page 128
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command n config bandwidth_control show bandwidth_control Parameters rx_rate [no_limit| ] tx_rate [no_limit| ] Each command is listed, in detail, in the following - D-Link DES-3350SR | Reference Manual - Page 129
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config scheduling max_packet and max_latency parameters are set to 0) is to empty the four hardware priority queues in order − from the highest priority queue (hardware - D-Link DES-3350SR | Reference Manual - Page 130
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config scheduling specified. This number is then multiplied by 16 ms to determine the maximum latency. For example, if 3 is specified, the maximum latency allowed - D-Link DES-3350SR | Reference Manual - Page 131
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config scheduling the total allowed time for the queue to transmit packets. For example, a value of 3 specifies 3 X 16 = 48 ms. The queue will continue transmitting - D-Link DES-3350SR | Reference Manual - Page 132
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show scheduling switch. Parameters none. Restrictions none. Example Usage: Local> show scheduling Command: show scheduling QOS Output Scheduling MAX. Packets MAX. Latency Class-0 100 150 Class-1 99 100 - D-Link DES-3350SR | Reference Manual - Page 133
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config 802.1p user_priority Description This command allows you to configure the way the switch will map an incoming packet, based on its 802.1p user priority, to one of the four available hardware priority queues on the switch. The switch's - D-Link DES-3350SR | Reference Manual - Page 134
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config 802.1p user_priority − The 802.1p user priority you want to associate with the (the number of the hardware queue) with. − The number of the switch's hardware priority queue. The switch has four - D-Link DES-3350SR | Reference Manual - Page 135
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show 802.1p user_priority Description This command will display the current 802.1p user priority to hardware priority queue mapping in use by the switch. Parameters None. Restrictions None. Example Usage: local> show 802.1p user_priority - D-Link DES-3350SR | Reference Manual - Page 136
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config 802.1p default_priority settings on the switch. If an untagged packet is received by the switch, the priority configured with this command will be written to the packet's priority field. Syntax config 802.1p default_priority [| - D-Link DES-3350SR | Reference Manual - Page 137
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: local> config 802.1p default_priority all 5 Command: config 802.1p default_priority all 5 Success. local> show 802.1p default_priority Purpose Used to display the current default priority settings on the switch. Syntax show - D-Link DES-3350SR | Reference Manual - Page 138
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show 802.1p default_priority specifies all of the ports between port 3 and port 4 − in numerical order. Restrictions None. Example Usage: local> show 802.1p default_priority - D-Link DES-3350SR | Reference Manual - Page 139
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config traffic_segmentation Purpose Used to configure traffic segmentation on the switch. Syntax config traffic_segmentation forward_list [null|] Description The config traffic_segmentation command is used to configure - D-Link DES-3350SR | Reference Manual - Page 140
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config traffic_segmentation the highest port number of the range. The Purpose Used to display the current traffic segmentation configuration on the switch. Syntax show traffic_segmentation Description The show - D-Link DES-3350SR | Reference Manual - Page 141
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show traffic_segmentation segmentation configuration on the switch. Parameters − Specifies a range of ports for which the current traffic segmentation configuration on the switch will be displayed. The port list is specified by - D-Link DES-3350SR | Reference Manual - Page 142
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 7 9-15 8 9-15 9 9-15 10 9-15 11 1-26 12 1-26 13 1-26 14 1-26 15 1-26 16 1-26 17 1-26 18 1-26 CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All config bandwidth_control Purpose Used to configure bandwidth control on a by-port basis. - D-Link DES-3350SR | Reference Manual - Page 143
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config bandwidth_control rx_rate − Specifies that one of the parameters above ports will be allowed to receive packets. Restrictions Only administrator-level users can issue this command. Example Usage: To configure bandwidth control: 143 - D-Link DES-3350SR | Reference Manual - Page 144
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>config bandwidth_control 1-10 tx_rate 10 Command: config bandwidth_control 1-10 tx_rate 10 Success. local> show bandwidth_control Purpose Used to display the bandwidth control configuration on the switch. Syntax show bandwidth_control - D-Link DES-3350SR | Reference Manual - Page 145
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>show bandwidth_control 1-11 Command: show bandwidth_control 1-11 Bandwidth Control Table Port ---1 2 3 4 5 6 7 8 9 10 11 RX Rate (Mbit|sec) TX_RATE (Mbit|sec) no_limit 10 no_limit 10 - D-Link DES-3350SR | Reference Manual - Page 146
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 13 PORT MIRRORING COMMANDS The port mirroring commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. - D-Link DES-3350SR | Reference Manual - Page 147
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config mirror port Purpose Used to configure a mirror port − source port pair on the switch. Syntax config mirror port [add|delete] source ports [rx|tx|both] Description This command allows you to add or delete mirroring - D-Link DES-3350SR | Reference Manual - Page 148
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config mirror port port list. both − Mirrors all the packets received or sent by the port or ports in the port list. Restrictions Only administrator-level users can issue this command. Example Usage: To add the mirroring ports: local> config - D-Link DES-3350SR | Reference Manual - Page 149
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide enable mirror Parameters none. Restrictions none. Example Usage: To enable mirroring configurations: local>enable mirror Command: enable mirror Success. local> disable mirror Purpose Used to disable a previously entered port mirroring - D-Link DES-3350SR | Reference Manual - Page 150
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: To disable mirroring configurations: local>disable mirror Command: disable mirror Success. local> show mirror Purpose Used to show the current port mirroring configuration on the switch. Syntax show mirror Description This - D-Link DES-3350SR | Reference Manual - Page 151
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>show mirror Command: show mirror Current Settings Mirror Status: Enabled Target Port : 9 Mirrored Port RX: TX: 1-5 local> 151 - D-Link DES-3350SR | Reference Manual - Page 152
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 14 VLAN COMMANDS The VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create vlan delete vlan config vlan config vlan config vlan config gvrp enable gvrp disable - D-Link DES-3350SR | Reference Manual - Page 153
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command show vlan show gvrp Parameters Each command is listed, in detail, in the following sections. create vlan Purpose Used to create a VLAN on the switch. Syntax create vlan {tag | - D-Link DES-3350SR | Reference Manual - Page 154
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: To create a VLAN v1, tag 2: local>create vlan v1 tag 2 Command: create vlan v1 tag 2 Success. local> delete vlan Purpose Used to delete a previously configured VLAN on the switch. Syntax delete vlan Description - D-Link DES-3350SR | Reference Manual - Page 155
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Success. local> config vlan add Purpose Used to add additional ports to a previously configured VLAN. Syntax config vlan add [tagged|untagged|forbidden] Description This command allows you to add ports to the port - D-Link DES-3350SR | Reference Manual - Page 156
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config vlan add of the ports between port 3 and port 4 − in numerical order. Restrictions Only administrator-level users can issue this command. Example Usage: To add 4 through 8 as tagged ports to the VLAN v1: local>config vlan v1 add tagged - D-Link DES-3350SR | Reference Manual - Page 157
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config vlan delete − A range of ports you want to delete from the above specified VLAN. The port list is specified by listing the beginning port number and the highest port number of the range. The beginning and end of the - D-Link DES-3350SR | Reference Manual - Page 158
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config vlan advertisement Description This command is used to enable or disable GVRP on the specified VLAN. Parameters − The name of the VLAN on which you want to enable or disable GVRP. enabled − Enables GVRP on the specified - D-Link DES-3350SR | Reference Manual - Page 159
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config gvrp Syntax config gvrp [|all] {state [enabled|disabled]|ingress_checking [enabled|disabled] } Description This command is used to configure the Group VLAN Registration Protocol on the switch. You can configure the switch. - D-Link DES-3350SR | Reference Manual - Page 160
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: To set the ingress checking status switch − without changing the GVRP configuration on the switch. Parameters none. Restrictions Only administrator-level users can issue this command. Example Usage: To enable the generic VLAN - D-Link DES-3350SR | Reference Manual - Page 161
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Success. local> disable gvrp Purpose Used to disable GVRP on the switch. Syntax disable gvrp Description This command, along with disable gvrp below, is used to enable and disable GVRP on the switch − without changing the GVRP - D-Link DES-3350SR | Reference Manual - Page 162
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show vlan Purpose Syntax Description Parameters Restrictions Used to display the current VLAN configuration on the switch show vlan {} This command displays summary information about each VLAN including the VLAN ID, VLAN name, the - D-Link DES-3350SR | Reference Manual - Page 163
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local> show gvrp Purpose Syntax Description Parameters Used to display the GVRP status for a port list on the switch. show gvrp {} This command displays the GVRP status for a port list on the switch to make VLAN forwarding decisions. - D-Link DES-3350SR | Reference Manual - Page 164
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show gvrp Restrictions port number of the range. The beginning and end of the port list range are separated by a dash. For example, 3 would specify - D-Link DES-3350SR | Reference Manual - Page 165
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 15 1 Disabled Disabled 16 1 Disabled Disabled 17 1 Disabled Disabled 18 1 Disabled Disabled CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All 165 - D-Link DES-3350SR | Reference Manual - Page 166
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 15 LINK AGGREGATION COMMANDS The link aggregation commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create link_aggregation delete link_aggregation config - D-Link DES-3350SR | Reference Manual - Page 167
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command Parameters show link_aggregation show lacp_port {group_id | algorithm} Each command is listed, in detail, in the following sections. create link_aggregation group_id Purpose Used to create a link aggregation - D-Link DES-3350SR | Reference Manual - Page 168
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>create link_aggregation group_id 1 Command: create link_aggregation group_id 1 Success. local> delete link_aggregation group_id Purpose Used to delete a previously configured link aggregation group. Syntax delete link_aggregation < - D-Link DES-3350SR | Reference Manual - Page 169
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local> config link_aggregation Purpose Used to configure a previously created link aggregation group. Syntax config link_aggregation group_id {master_port |ports | state [enabled|disabled]} Description This - D-Link DES-3350SR | Reference Manual - Page 170
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config link_aggregation numerical order. state [enabled|disabled] − Allows you to enable or disable the specified link aggregation group. Restrictions Only administrator-level users can issue this command. Example Usage: To define a load- - D-Link DES-3350SR | Reference Manual - Page 171
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config link_aggregation algorithm Description This command configures to part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data. This feature is only available using the addressbased load- - D-Link DES-3350SR | Reference Manual - Page 172
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>config link_aggregation algorithm mac_source_dest Command: config link_aggregation algorithm mac_source_dest Success. local> config lacp_port Purpose Used to configure the current mode of the Link Aggregation Control Protocol port. - D-Link DES-3350SR | Reference Manual - Page 173
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Success. local> show link_aggregation Purpose Used to display the current link aggregation configuration on the switch. Syntax show link_aggregation {group_id |algorithm} Description This command will display the current link - D-Link DES-3350SR | Reference Manual - Page 174
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Group ID : 5 Type : TRUNK Master Port : 0 Member Port : Active Port : Status : Disabled Flooding Port : 0 local> show lacp_port Purpose Used to show the current mode of the Link Aggregation Control Protocol port. Syntax show - D-Link DES-3350SR | Reference Manual - Page 175
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 1 Active 2 Active 3 Active 4 Active 5 Active 6 Active 7 Active 8 Active 9 Active 10 Active 11 Active 12 Active 13 Passive 14 Passive 15 Passive 16 Passive 17 Passive - D-Link DES-3350SR | Reference Manual - Page 176
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 16 IP INTERFACE COMMANDS The IP interface commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. - D-Link DES-3350SR | Reference Manual - Page 177
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command show ipif Parameters Each command is listed, in detail, in the following sections. config ipif Purpose Syntax Used to configure an IP interface created with the create ipif command. config ipif [{ - D-Link DES-3350SR | Reference Manual - Page 178
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config ipif Restrictions protocol for the assignment of an IP address to the switch's System IP interface. dhcp − Allows the selection of the DHCP protocol for the assignment of an IP address to the switch's System IP interface. Only - D-Link DES-3350SR | Reference Manual - Page 179
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create ipif Parameters Restrictions - The name of .1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/16). - The name of the VLAN corresponding to the System IP interface. state [enabled|disabled] - Allows you to enable or - D-Link DES-3350SR | Reference Manual - Page 180
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide delete ipif Purpose Syntax Description Parameters Restrictions Used to delete an IP interface on the switch. delete ipif { | all} This command will delete an IP interface on the switch. - The name of the IP interface - D-Link DES-3350SR | Reference Manual - Page 181
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide enable ipif Syntax Description Parameters Restrictions enable ipif { | all} This command will enable an IP interface on the switch. - The name of the IP interface can be up to 12 alphaneumeric characters. all − - D-Link DES-3350SR | Reference Manual - Page 182
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide disable ipif Description This command will disable an IP interface on the switch. Parameters - The name of the IP interface can be up to 12 alphaneumeric characters. all − Specifies all IP interface names on the switch. - D-Link DES-3350SR | Reference Manual - Page 183
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show ipif Parameters Restrictions switch. - The name of the IP : 10.90.90.90 Subnet Mask : 255.0.0.0 VLAN Name : default Admin. State : Disabled Link Status : Link UP Member Ports : 1-50 (MANUAL) Total Entries : 1 local> 183 - D-Link DES-3350SR | Reference Manual - Page 184
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 17 ARP COMMANDS The ARP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create - D-Link DES-3350SR | Reference Manual - Page 185
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create arpentry Purpose Used to make a static entry into the ARP table. Syntax create arpentry Description This command is used to enter an IP address into the switch's ARP table. Parameters − The IP address of - D-Link DES-3350SR | Reference Manual - Page 186
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide delete arpentry Purpose Syntax Used to delete a static entry above, by specifying either the IP address of the entry or all. Specifying all clears the switch's ARP table. Parameters − The IP address of the end node or station. all - D-Link DES-3350SR | Reference Manual - Page 187
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config arp_aging Purpose Used to configure the age-out timer for ARP table entries on the switch. Syntax config arp_aging time Description This command sets the maximum amount of time, in seconds, that an ARP entry can - D-Link DES-3350SR | Reference Manual - Page 188
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config arpentry Syntax config arpentry Description This command configures ARP entries in the switch's ARP table. Parameters − The IP address of the end node or station. − The MAC address corresponding - D-Link DES-3350SR | Reference Manual - Page 189
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show arpentry Description This command is used to display the current contents of the switch's ARP table. Parameters − The name of the IP interface the end node or station for which the ARP table entry was made, resides - D-Link DES-3350SR | Reference Manual - Page 190
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide System System System System System System System System System System This command is used to remove dynamic ARP table entries from the switch's ARP table. Static ARP table entries are not affected. Parameters none. Restrictions Only - D-Link DES-3350SR | Reference Manual - Page 191
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide To remove dynamic entries in the ARP table: local>clear arptable Command: clear arptable Success. local> 191 - D-Link DES-3350SR | Reference Manual - Page 192
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 18 ROUTING TABLE COMMANDS The routing table commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. - D-Link DES-3350SR | Reference Manual - Page 193
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create iproute Purpose Used to create an IP route entry to the switch's IP routing table. Syntax create iproute [default | ] {} Description This command is used to create an IP route entry to the - D-Link DES-3350SR | Reference Manual - Page 194
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Success. local> delete iproute Purpose Used to delete an IP route entry from the switch's IP routing table. Syntax delete iproute [default|] Description This command will delete an existing entry from the switch's IP - D-Link DES-3350SR | Reference Manual - Page 195
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command: delete iproute default Success. local> show iproute Purpose Used to display the switch's current IP routing table. Syntax show iproute {} {static|rip|ospf} Description This command will display the switch's current - D-Link DES-3350SR | Reference Manual - Page 196
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Restrictions None. Example Usage: To display the contents of the IP routing table: local>show iproute Command: show iproute Routing Table IP Address|Netmask Gateway - D-Link DES-3350SR | Reference Manual - Page 197
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 19 ROUTE REDISTRIBUTION COMMANDS The switch port commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create route redistribute dst ospf - D-Link DES-3350SR | Reference Manual - Page 198
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Each command is listed, in detail, in the following sections. create route redistribute dst ospf Purpose Used to add route redistribution settings for the exchange of RIP routes to OSPF routes on the switch. Syntax create route redistribute - D-Link DES-3350SR | Reference Manual - Page 199
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create route redistribute dst ospf − Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. Restrictions Only administrator-level users can issue this command. Routing information - D-Link DES-3350SR | Reference Manual - Page 200
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>create route redistribute dst ospf src rip OSPF or RIP. Routing information entered into the Static Routing Table on the local DES-3350SR switch is also redistributed. Parameters src [static|ospf {all|internal|external|type_1|type_2}] − - D-Link DES-3350SR | Reference Manual - Page 201
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create route redistribute dst rip OSPF interface cost. This is analogous to a HOP Count in the RIP routing protocol. Restrictions Only administrator-level users can issue this command. Routing information source − OSPF and the Static Route - D-Link DES-3350SR | Reference Manual - Page 202
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: To add route redistribution settings: local> local> delete route redistribute Purpose Used to delete an existing route redistribute configuration on the switch. Syntax delete route redistribute [dst [rip|ospf] src [rip|static| - D-Link DES-3350SR | Reference Manual - Page 203
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command: delete route redistribute dst rip src ospf Success. local> config route redistribute dst ospf Purpose Used to configure route redistribution from RIP to OSPF. Syntax config route redistribute dst ospf src [static|rip|local] {mettype - D-Link DES-3350SR | Reference Manual - Page 204
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config route redistribute dst ospf the destination device. This is analogous to a Hop Count in the RIP routing protocol. Only administrator-level users can issue this command. Routing information source − RIP: the Static Route table, and - D-Link DES-3350SR | Reference Manual - Page 205
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Local 0 to 16777214 mettype 1 mettype 2 Allowed Metric Type combinations are mettype 1 or mettype 2. The metric value 0 above will be redistributed in OSPF as the metric 20. Example Usage: To configure route redistributions: local>config route - D-Link DES-3350SR | Reference Manual - Page 206
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config route redistribute dst rip Parameters Restrictions the various routers according to the individual routers current routing protocol. The switch into the Static Routing Table on the local switch is also redistributed. src − Allows the - D-Link DES-3350SR | Reference Manual - Page 207
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide OSPF 0 to 16 all type_1 type_2 internal type_1 internal type_2 external to all. Entering the metric 0 specifies transparency. Example Usage: To configure route redistributions: local>config route redistribute dst ospf src rip mettype type_1 - D-Link DES-3350SR | Reference Manual - Page 208
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show route redistribute Purpose Used to display the route redistribution on the switch. Syntax show route redistribute {dst [rip|ospf]|src [rip|static|local|ospf]} Description Displays the current route redistribution settings on the switch - D-Link DES-3350SR | Reference Manual - Page 209
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 20 IGMP COMMANDS The switch port commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config igmp show igmp show - D-Link DES-3350SR | Reference Manual - Page 210
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config igmp Purpose Used to configure IGMP on the switch. Syntax Description Parameters config igmp [ipif|all] {version |query_interval |max_response_time | robustness_variable | - D-Link DES-3350SR | Reference Manual - Page 211
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config igmp Restrictions The default is 1 second. state [enabled|disabled] − Enables or disables IGMP for the specified IP interface. Only administrator-level users can issue this command. Example Usage: To configure the IGMP for the IP - D-Link DES-3350SR | Reference Manual - Page 212
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show igmp Restrictions will be displayed. none. Example Usage: To display IGMP configurations: local>show igmp Command: show igmp IGMP Interface Configurations Interface IP Address Ver- Query Maximum Robust- Last Member State sion Response - D-Link DES-3350SR | Reference Manual - Page 213
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show igmp group Description This command will display the IGMP group configuration. Parameters group − The multicast group ID. − The name of the IP interface the IGMP group is part of. Restrictions none. Example - D-Link DES-3350SR | Reference Manual - Page 214
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 21 IGMP SNOOPING COMMANDS The switch port commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config igmp_snooping config igmp_snooping querier - D-Link DES-3350SR | Reference Manual - Page 215
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command show igmp_snooping show igmp_snooping group show router_ports Parameters vlan vlan vlan static dynamic Each command is listed, in detail, in the following sections. config igmp_snooping - D-Link DES-3350SR | Reference Manual - Page 216
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config igmp_snooping The default is 260 seconds. route_timeout − Specifies the maximum amount of time a route will remain in the switch's can be a member of a multicast group without the switch receiving a host membership report - D-Link DES-3350SR | Reference Manual - Page 217
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config igmp_snooping querier Purpose Syntax Description Parameters Used to configure the time in command configures IGMP snooping querier. − The name of the VLAN for which IGMP snooping querier is to be configured. query_interval - D-Link DES-3350SR | Reference Manual - Page 218
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config igmp_snooping querier more members of a group on a network. This interval is calculated as follows: (robustness variable x query interval) + (1 x query response interval). • Other querier present - D-Link DES-3350SR | Reference Manual - Page 219
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config igmp_snooping querier Restrictions querier. Only administrator-level users can issue this command. Example Usage: To configure the IGMP snooping: local>config igmp_snooping querier default query_interval 125 state enabled Command: - D-Link DES-3350SR | Reference Manual - Page 220
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config router_ports Description This command allows you − The name of the VLAN on which the router port resides. − Specifies a range of ports to be configured. Ports are specified by entering the lowest port - D-Link DES-3350SR | Reference Manual - Page 221
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>config router_ports default add 1-10 Command: config router_ports default add 1-10 Success. local> enable igmp_snooping Purpose Used to enable IGMP snooping on the switch. Syntax enable igmp_snooping {forward-mcrouteronly} Description - D-Link DES-3350SR | Reference Manual - Page 222
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide To enable IGMP snooping on the switch: local>enable igmp_snooping Command: enable igmp_snooping Success. local> disable igmp_snooping Purpose Used to enable IGMP snooping on the switch. Syntax disable igmp_snooping Description This command - D-Link DES-3350SR | Reference Manual - Page 223
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>disable igmp_snooping Command: disable igmp_snooping Success. local> show igmp_snooping Purpose Used to show the current status of IGMP snooping on the switch. Syntax show igmp_snooping {vlan } Description This command - D-Link DES-3350SR | Reference Manual - Page 224
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>show igmp_snooping Command: show igmp_snooping IGMP Snooping Global State Multicast router Only VLAN Name Query Interval Max Response Time Robustness Value Last Member Query Interval Host Timeout Route Timeout Leave Timer Querier State - D-Link DES-3350SR | Reference Manual - Page 225
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show igmp_snooping group Purpose Used to display the current IGMP snooping group configuration on the switch. Syntax show igmp_snooping group {vlan } Description This command will display the current IGMP snooping group - D-Link DES-3350SR | Reference Manual - Page 226
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Multicast group MAC address Reports Port Member VLAN Name Multicast group MAC address Reports Port Member VLAN Name Multicast group MAC address Reports Port Member VLAN Name Multicast group MAC address Reports Port Member Total Entries : 6 local> - D-Link DES-3350SR | Reference Manual - Page 227
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show router_ports Parameters − The name of the VLAN on which the router port resides. static − Displays router ports that have been statically configured. dynamic − Displays router ports that have been dynamically configured. - D-Link DES-3350SR | Reference Manual - Page 228
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 228 - D-Link DES-3350SR | Reference Manual - Page 229
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 22 802.1X COMMANDS The DES-3350SR implements the server-side of the IEEE 802.1x Port-based Network Access Control. This mechanism is intended to allow only authorized users, or other network devices, access to network resources by establishing - D-Link DES-3350SR | Reference Manual - Page 230
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command config 802.1x init config 802.1x reauth config 802.1x auth_mode config radius add config radius delete config radius show radius Parameters server_timeout < - D-Link DES-3350SR | Reference Manual - Page 231
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide enable 802.1x Purpose Used to enable the 802.1x server on the switch. Syntax enable 802.1x Description The enable 802.1x command enables the 802.1x Port-based Network Access control server application on the switch. Parameters None. - D-Link DES-3350SR | Reference Manual - Page 232
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide disable 802.1x Description The disable 802.1x command is used to disable the 802.1x Port-based Network Access control server application on the switch. Parameters None. Restrictions Only administrator-level users can issue this command. - D-Link DES-3350SR | Reference Manual - Page 233
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show 802.1x auth_configuration Port-based Network Access Control server application on the switch. Parameters ports − Specifies a range of ports. The port list is specified by listing the lowest switch number and the beginning port - D-Link DES-3350SR | Reference Manual - Page 234
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show 802.1x auth_configuration port number displayed above. There are two 802.1x capabilities that can be set on the switch: Authentication and None. AdminCrlDir: Both|In − Shows whether a controlled Port that is unauthorized will exert control - D-Link DES-3350SR | Reference Manual - Page 235
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show 802.1x auth_configuration Request|Identity packets. ServerTimeout − Shows the length of time to wait for a response from a Radius server. MaxReq − Shows the maximum number - D-Link DES-3350SR | Reference Manual - Page 236
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide TxPeriod : 30 sec SuppTimeout : 30 sec ServerTimeout : 30 sec MaxReq : 2 times ReAuthPeriod : 3600 sec ReAuthenticate : Disabled show 802.1x auth_state Purpose Used to display the - D-Link DES-3350SR | Reference Manual - Page 237
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show 802.1x auth_state Port number − Shows the physical port number on the switch. Auth PAE State: Initalize|Disconnected|Connecting| Authenticating|Authenticated|Held |ForceAuth|ForceUnauth − Shows the current state of the Authenticator PAE. - D-Link DES-3350SR | Reference Manual - Page 238
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 2 ForceAuth Success Authorized 3 ForceAuth Success Authorized 4 ForceAuth Success Authorized 5 ForceAuth Success Authorized 6 ForceAuth Success Authorized 7 ForceAuth Success Authorized 8 ForceAuth Success Authorized 9 - D-Link DES-3350SR | Reference Manual - Page 239
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config 802.1x capability number on that switch, separated by a colon. Then highest switch number, and the highest port number of the range (also separated by a colon) are specified. The beginning and end of the port list range are - D-Link DES-3350SR | Reference Manual - Page 240
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config 802.1x auth_parameter Authentication parameters on a [enabled|disabled]}] Description The config 802.1x auth_parameter command is used to configure the 802.1x Authentication parameters on a range of ports. The default parameter - D-Link DES-3350SR | Reference Manual - Page 241
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config 802.1x auth_parameter direction [both|in] − Determines whether a controlled port blocks communication in both the receiving and transmitting directions, or just the receiving direction. port_control − Configures the administrative - D-Link DES-3350SR | Reference Manual - Page 242
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config 802.1x auth_parameter authentication Period field, above. Restrictions Only administrator-level users can issue this command. Example Usage: To configure 802.1x authentication parameters for ports 1 to 20: local>config 802.1x - D-Link DES-3350SR | Reference Manual - Page 243
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config 802.1x init − Specifies a range of ports. The port list is specified by listing the lowest switch number and the beginning port number on that switch, separated by a colon. Then highest switch number, and the highest port - D-Link DES-3350SR | Reference Manual - Page 244
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config 802.1x reauth authentication feature of the switch. Syntax config 802.1x reauth port_based ports [|all] | mac_based ports [|all] {mac_address } Description The config 802.1x reauth command is used to - D-Link DES-3350SR | Reference Manual - Page 245
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Success. local> config 802.1x auth_mode Purpose Used to configure the 802.1x authentication mode feature of the switch. Syntax config 802.1x reauth port_based ports [|all] | mac_based ports [|all] {mac_address } - D-Link DES-3350SR | Reference Manual - Page 246
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: To configure the 802.1x port-based authentication mode for server settings can be entered on the switch. − The IP address of the Radius server. key − Specifies that a password and encryption key will be used between - D-Link DES-3350SR | Reference Manual - Page 247
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config radius add − The shared-secret key used by the Radius server and the switch. Up users can issue this command. Example Usage: To configure Radius server communication settings: local>config radius add 1 10.48.74.121 key dlink - D-Link DES-3350SR | Reference Manual - Page 248
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config radius delete Syntax config radius delete Description The config radius delete command is used to delete a previously entered Radius server configuration. Parameters − Assigns a number to the - D-Link DES-3350SR | Reference Manual - Page 249
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config radius |acct_port } Description The config radius command is used to configure the switch's Radius settings. Parameters − Assigns a number to the current set of Radius server - D-Link DES-3350SR | Reference Manual - Page 250
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Success. local> show radius Purpose Used to display the current Radius configurations on the switch. Syntax show radius Description The show radius command is used to display the current Radius configurations on the switch. Parameters - D-Link DES-3350SR | Reference Manual - Page 251
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local> 251 - D-Link DES-3350SR | Reference Manual - Page 252
Switch User's Guide 23 ACCESS CONTROL LIST (ACL) COMMANDS The DES-3350SR implements Access Control Lists that enable the switch to deny network access to specific devices or device groups based on IP settings or MAC address. Command create access_profile Parameters ethernet vlan source_mac - D-Link DES-3350SR | Reference Manual - Page 253
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command delete access_profile config access_profile Parameters udp udp profile_id add access_id ethernet vlan source_mac destination_mac 802.1p ethernet_type - D-Link DES-3350SR | Reference Manual - Page 254
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command Parameters user_define priority replace_priority replace_dscp delete Due to a chipset limitation, the switch currently supports profile that instructs the switch to examine all - D-Link DES-3350SR | Reference Manual - Page 255
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide when a logical AND operation between an IP address specified in the next step and the ip_source_mask match. The default for an access profile on the switch profile was created. The add parameter instructs the switch to add the criteria that follows - D-Link DES-3350SR | Reference Manual - Page 256
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create access_profile Purpose Used to create an access profile on the switch and to define which parts of each incoming frame's header the switch will examine. Masks can be entered that will be combined with the values the switch finds in the - D-Link DES-3350SR | Reference Manual - Page 257
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create access_profile Specific values for the rules are entered using the config access_profile command, below. Parameters ethernet − Specifies that the switch will examine the layer 2 part of each packet header. vlan − Specifies that the - D-Link DES-3350SR | Reference Manual - Page 258
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create access_profile dscp − Specifies that the switch will examine the DiffServ Code Point (DSCP) field in each frame's header. icmp − Specifies that the switch will examine the Internet Control Message Protocol (ICMP) field in each frame's - D-Link DES-3350SR | Reference Manual - Page 259
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create access_profile Restrictions dst_port_mask − Specifies a UDP port mask for the destination port. protocol_id − Specifies that the switch will examine each frame's Protocol ID field. user_mask − - D-Link DES-3350SR | Reference Manual - Page 260
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Success. local> delete access_profile Purpose Used to delete a when it is created with the create access_profile command. Restrictions Only administrator-level users can issue this command. Example Usage: To delete the access profile with a - D-Link DES-3350SR | Reference Manual - Page 261
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config access_profile Purpose Syntax Used to configure an access profile on the switch and to define specific values that will be used to by the switch 07>|ethernet_type - D-Link DES-3350SR | Reference Manual - Page 262
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config access_profile to configure an access profile on the switch and to enter the switch will look only into the layer 2 part of each packet. vlan − Specifies that the access profile will apply to only to this VLAN. source_mac - D-Link DES-3350SR | Reference Manual - Page 263
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config access_profile in the packet header. ip − Specifies that the switch will look into the IP fields in each packet. vlan − Specifies that the access profile will apply to only to this VLAN. source_ip − Specifies that - D-Link DES-3350SR | Reference Manual - Page 264
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config access_profile have this IGMP type value. tcp − Specifies that the switch will exmamine port in their header. protocol_id − Specifies that the switch will examine the Protocol field in each packet and if this field contains - D-Link DES-3350SR | Reference Manual - Page 265
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config access_profile Restrictions priority − Specifies that the access profile will apply to packets that contain this value in their 802.1p priority field of - D-Link DES-3350SR | Reference Manual - Page 266
. local> DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show access_profile Purpose Used to display the currently configured access profiles on the switch. Syntax show access_profile Description The show access_profile command is used to display the currently configured access profiles - D-Link DES-3350SR | Reference Manual - Page 267
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Access ID 1 10.42.73.0 267 - D-Link DES-3350SR | Reference Manual - Page 268
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 24 BOOTP RELAY COMMANDS The BOOTP relay commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. - D-Link DES-3350SR | Reference Manual - Page 269
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config bootp_relay Purpose Used to configure the BOOTP relay feature of the switch. Syntax config bootp_relay {hops } {time } Description This command is used to configure the BOOTP relay feature. Parameters hops - D-Link DES-3350SR | Reference Manual - Page 270
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config bootp_relay add Purpose Used to add an IP destination address to the switch's BOOTP relay table. Syntax config bootp_relay add ipif Description This command adds an IP address as a destination to forward ( - D-Link DES-3350SR | Reference Manual - Page 271
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config bootp_relay delete Purpose Used to delete one or all IP destination addresses from the switch's BOOTP relay table. Syntax config bootp_relay delete ipif Description This command is used to delete one or all of - D-Link DES-3350SR | Reference Manual - Page 272
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide enable bootp_relay Purpose Used to enable the BOOTP relay function on the switch. Syntax enable bootp_relay Description This command, in combination with the disable bootp_relay command below, is used to enable and disable the BOOTP relay - D-Link DES-3350SR | Reference Manual - Page 273
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide disable bootp_relay Purpose Used to disable the BOOTP relay function on the switch. Syntax disable bootp_relay Description This command, in combination with the enable bootp_relay command above, is used to enable and disable the BOOTP relay - D-Link DES-3350SR | Reference Manual - Page 274
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show bootp_relay Description This command will display the current BOOTP relay configuration for the switch, or if an IP interface name is specified, the BOOTP relay configuration for that IP interface. Parameters − The name of - D-Link DES-3350SR | Reference Manual - Page 275
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 25 DNS RELAY COMMANDS The DNS relay commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. - D-Link DES-3350SR | Reference Manual - Page 276
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Each command is listed, in detail, in the following sections. config dnsr Purpose Syntax Used to configure the DNS relay function. config dnsr [primary|secondary] nameserver Description This command is used to configure the DNS - D-Link DES-3350SR | Reference Manual - Page 277
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local> config dnsr [add|delete] static Purpose Used to add or delete a static entry into the switch's DNS resolution table. Syntax config dnsr [add|delete] static Description This command allows you to add or - D-Link DES-3350SR | Reference Manual - Page 278
local> DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: To delete an entry domain name dnsr command below, to enable and disable DNS Relay on the switch. Parameters none. Restrictions Only administrator-level users can issue this command. Example Usage: To enable status of - D-Link DES-3350SR | Reference Manual - Page 279
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>enable dnsr Command: enable dnsr Success. local> disable dnsr Purpose Used to disable DNS relay on the switch. Syntax disable dnsr Description This command is used, in combination with the enable dnsr command above, to enable and - D-Link DES-3350SR | Reference Manual - Page 280
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide enable dnsr cache Purpose Used to enable the DNS relay cache. Syntax enable dnsr cache Description This command is used, in combination with the disable - D-Link DES-3350SR | Reference Manual - Page 281
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide disable dnsr cache enable and disable the DNS relay cache. Parameters none. Restrictions Only administrator-level users can issue this command. Example Usage: To disable cache lookup for DNS relay: local>disable dnsr cache Command: disable - D-Link DES-3350SR | Reference Manual - Page 282
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide enable dnsr static this command. Example Usage: To enable static table lookup for DNS disable the DNS relay static forwarding table. Parameters none. Restrictions Only administrator-level users can issue this command. Example Usage: 282 - D-Link DES-3350SR | Reference Manual - Page 283
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide To disable static table lookup for DNS relay: local>disable dnsr static Command: disable dnsr static Success. local> show dnsr Purpose Syntax Description Parameters Restrictions - D-Link DES-3350SR | Reference Manual - Page 284
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>show dnsr Command: show dnsr DNSR Status Primary Name Server Secondary Name Server DNSR Cache Status DNSR Static Table Status : Disabled : 0.0.0.0 : 0.0.0.0 : Disabled : Disabled DNSR - D-Link DES-3350SR | Reference Manual - Page 285
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 26 RIP COMMANDS The RIP commands in the Command Line Interface v1_only|v2_only|v1_or_v2|disabled] state [enabled|disabled] authentication [enabled |disabled] tx_mode [disabled|v1_only|v1_compatible|v2_only] rx_mode [v1_only|v2_only - D-Link DES-3350SR | Reference Manual - Page 286
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command show rip Parameters ipif Each command is listed, in detail, in the following sections. config rip ipif Purpose Syntax Description Parameters Used to configure RIP on the IP interface named "ipif" on the switch. config - D-Link DES-3350SR | Reference Manual - Page 287
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config rip ipif Restrictions The disabled entry prevents the transmission of RIP packets. disabled − disabled] − Allows RIP to be enabled and disabled on an IP interface on the switch. Only administrator-level users can issue this command. 287 - D-Link DES-3350SR | Reference Manual - Page 288
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: To change the RIP receive mode for the IP Purpose Syntax Description Parameters Used to configure RIP on all the IP interfaces on the switch. config rip all {authentication [enabled |disabled]|tx_mode [disabled| - D-Link DES-3350SR | Reference Manual - Page 289
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config rip all Restrictions RIP packets. It determines how transmitted RIP packets will be interpreted disabled] − Allows RIP to be enabled and disabled on an IP interface on the switch. Only administrator-level users can issue this command 289 - D-Link DES-3350SR | Reference Manual - Page 290
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config rip all this command. Example Usage: To change the RIP state to enabled for all the IP interfaces on the switch: local>config rip all state enabled Command: config rip all state enabled Success. local> enable rip Purpose Syntax - D-Link DES-3350SR | Reference Manual - Page 291
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide To enable RIP: local>enable rip Command: enable rip Success. local> disable rip Purpose Syntax Description Parameters Restrictions Used to disable RIP. disable rip This - D-Link DES-3350SR | Reference Manual - Page 292
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show rip Purpose Used to display the RIP configuration and statistics for the switch. Syntax show rip {ipif } Description This command will display the RIP configuration for a given IP interface or for all IP interfaces. - D-Link DES-3350SR | Reference Manual - Page 293
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>show rip Command: show rip RIP Interface Settings RIP Global State : Disabled Interface IP Address TX Mode RX Mode System 10.48.74.122 - D-Link DES-3350SR | Reference Manual - Page 294
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 27 DVMRP COMMANDS The switch port commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config dvmrp enable dvmrp disable - D-Link DES-3350SR | Reference Manual - Page 295
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config dvmrp Purpose Used to configure DVMRP on the switch. Syntax Description tree. It is similar to, but not defined as, the hope count in RIP. The default is 1. probe − This setting is the Probe Interval. The switch - D-Link DES-3350SR | Reference Manual - Page 296
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config dvmrp Restrictions state [enabled|disabled] − Allows DVMRP to be enabled or disabled on this interface. Only administrator-level users can issue this command. Example Usage: To configure DVMRP configurations of IP interface System: - D-Link DES-3350SR | Reference Manual - Page 297
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide enable dvmrp Restrictions Only administrator-level users can issue this command. Example Usage: To enable DVMRP: local>enable dvmrp Command: enable dvmrp Success. local> disable dvmrp Purpose Used to disable DVMRP. Syntax - D-Link DES-3350SR | Reference Manual - Page 298
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide To disable DVMRP: local>disable dvmrp Command: disable dvmrp Success. local> show dvmrp routing_table Purpose Used to display the current DVMRP routing table. Syntax show - D-Link DES-3350SR | Reference Manual - Page 299
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide DVMRP Routing Table Source Address Source Mask Upstream Metric Learned Interface Neighbor 10.0.0.0 255.0.0.0 10.90.90.90 2 Local System 20.0.0.0 255.0.0.0 20.1.1.1 2 Local if11 - D-Link DES-3350SR | Reference Manual - Page 300
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Example Usage: To display DVMRP neighbor table: local>show dvmrp neighbor Command: show dvmrp neighbor DVMRP Neighbor Address Table Interface System Neighbor Address Generation ID - D-Link DES-3350SR | Reference Manual - Page 301
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show dvmrp nexthop Restrictions none. Example Usage: To display DVMRP routing next hop table: local>show dvmrp nexthop Command: show dvmrp nexthop Source IP Address - D-Link DES-3350SR | Reference Manual - Page 302
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show dvmrp interface for which you want to display the DVMRP status. Restrictions none. Example Usage: To show DVMRP configurations: local>show dvmrp Command: show dvmrp DVMRP Global State : Disabled Interface System Disabled IP Address - D-Link DES-3350SR | Reference Manual - Page 303
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 28 PIM COMMANDS The PIM commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config - D-Link DES-3350SR | Reference Manual - Page 304
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config pim Purpose Used to configure PIM on the switch. Syntax config pim [ipif /all] {hello /jp_interval /state [enabled/disabled]} Description This command is used to configure PIM on the switch. - D-Link DES-3350SR | Reference Manual - Page 305
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>config pim ipif System hello 35 jp_interval 70 state enabled Command: config pim ipif System hello 35 jp_interval 70 state enabled Success. local> enable pim Purpose Used to enable PIM on the switch. Syntax enable pim Description - D-Link DES-3350SR | Reference Manual - Page 306
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local> disable pim Purpose Used to disable PIM on the switch. Syntax disable pim Description This command, in combination with the enable pim command above, is used to enable or disable PIM on the switch. Parameters none. Restrictions - D-Link DES-3350SR | Reference Manual - Page 307
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show pim neighbor Syntax show pim neighbor {ipif /ipaddress } Description This command will display the current PIM neighbor router table. Parameters - D-Link DES-3350SR | Reference Manual - Page 308
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show pim Purpose Syntax Description Parameters Restrictions Used to display the current PIM configuration. show pim {ipif } This command will display the current PIM configuration. − The name of the IP interface for - D-Link DES-3350SR | Reference Manual - Page 309
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local> 309 - D-Link DES-3350SR | Reference Manual - Page 310
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 29 IP MULTICASTING COMMANDS The IP multicasting commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. - D-Link DES-3350SR | Reference Manual - Page 311
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show ipmc cache Description This command will display the current IP multicast forwarding cache. Parameters group − The multicast group ID. ipaddress − The IP - D-Link DES-3350SR | Reference Manual - Page 312
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show ipmc Purpose Used to display the IP multicast interface table. Syntax show ipmc {ipif |protocol [dvmrp|pim]} Description This command will display - D-Link DES-3350SR | Reference Manual - Page 313
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>show ipmc Command: show ipmc Interface System IP Address Multicast Routing 10.90.90.90 INACT Total Entries: 1 local> 313 - D-Link DES-3350SR | Reference Manual - Page 314
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 30 MD5 CONFIGURATION COMMANDS The MD5 configuration commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config md5 create md5 delete md5 - D-Link DES-3350SR | Reference Manual - Page 315
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config md5 Purpose Used to enter configure an MD5 key and password. Syntax config md5 Description This command is used to configure an MD5 key and password. Parameters − The MD5 key ID. < - D-Link DES-3350SR | Reference Manual - Page 316
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create md5 Purpose Used to create an MD5 key table. Syntax create md5 key Description This command is used to create an MD5 key table. Parameters − The MD5 key ID. − An MD5 - D-Link DES-3350SR | Reference Manual - Page 317
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide delete md5 Purpose Used to delete an MD5 key table. Syntax delete md5 key Description This command is used to delete an MD5 - D-Link DES-3350SR | Reference Manual - Page 318
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show md5 Restrictions none. Usage Example To display the current MD5 key: local>show md5 Command: show md5 MD5 Key Table Key-ID -----1 2 3 4 Key ---------- dlink develop fireball intelligent Total Entries: 4 local> 318 - D-Link DES-3350SR | Reference Manual - Page 319
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 31 OSPF CONFIGURATION COMMANDS The OSPF configuration commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command Parameters config ospf router_id enable ospf - D-Link DES-3350SR | Reference Manual - Page 320
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command Parameters create ospf host_route delete ospf host_route config ospf host_route show ospf host_route create ospf aggregation delete ospf aggregation config ospf aggregation show ospf - D-Link DES-3350SR | Reference Manual - Page 321
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Command show ospf ipif show ospf all create ospf virtual_link hello_interval dead_interval authentication [simple |md5 |none] hello_interval - D-Link DES-3350SR | Reference Manual - Page 322
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config ospf Purpose Used to configure the OSPF router ID. Syntax config ospf router_id Description This command is used to configure the OSPF router ID. Parameters − The OSPF router ID. Restrictions Only administrator- - D-Link DES-3350SR | Reference Manual - Page 323
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide enable ospf this command. Usage Example To enable OSPF on the switch: local>enable ospf Command: enable ospf Success. local> disable ospf Purpose Used to disable OSPF on the switch. Syntax disable ospf Description This command, in - D-Link DES-3350SR | Reference Manual - Page 324
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local> show ospf Purpose Syntax Description Parameters Restrictions Used to display the current OSPF state on the switch. show ospf This command will display the current state of OSPF on the switch, divided into the following categories: - D-Link DES-3350SR | Reference Manual - Page 325
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide OSPF Router ID : 10.1.1.2 State : Enabled OSPF Interface Settings Interface IP Address Area ID -----------System ip2 ip3 10.90.90.90|8 0.0.0.0 20.1.1.1|8 0.0.0.0 30.1.1.1|8 0.0.0.0 State -------Disabled Disabled Disabled Link Metric - D-Link DES-3350SR | Reference Manual - Page 326
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide OSPF Area Aggregation Settings Area ID Aggregated LSDB Advertise Network Address Type Total Entries : 0 OSPF Host Route Settings Host Address Metric ------ 10.3.3.3 1 Area ID 10.1.1.1 - D-Link DES-3350SR | Reference Manual - Page 327
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create ospf area stub or normal. stub_summary − Enables or disables the OSPF area to import summary LSA advertisements. metric − The OSPF area cost - D-Link DES-3350SR | Reference Manual - Page 328
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide delete ospf area Parameters Restrictions − − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. Only administrator-level users can issue this command. - D-Link DES-3350SR | Reference Manual - Page 329
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config ospf area type − Allows the specification of the and 16,777,215. The default is 0. Restrictions Only administrator-level users can issue this command. Usage Example To configure an OSPF area's settings: local>config ospf area 10.48.74. - D-Link DES-3350SR | Reference Manual - Page 330
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show ospf Description Parameters Restrictions This command will display the current OSPF area configuration. − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. - D-Link DES-3350SR | Reference Manual - Page 331
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create ospf host_route Description This command is used to configure the OSPF host route settings. Parameters − The host's IP address. area − A 32-bit number in the form of an IP address (xxx.xxx. - D-Link DES-3350SR | Reference Manual - Page 332
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide delete ospf host_route Syntax delete ospf host_route Description This command is used to delete an OSPF host route. Parameters − The IP address of the OSPF host. Restrictions Only administrator-level users can issue this - D-Link DES-3350SR | Reference Manual - Page 333
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config ospf host_route − − A 32 and 65,535, which will be advertised. Restrictions Only administrator-level users can issue this command. Usage Example: To configure an OSPF host route: local>config ospf host_route 10.48.74 - D-Link DES-3350SR | Reference Manual - Page 334
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show ospf host_route Parameters − The IP address 0 0 Total Entries: 2 local> create ospf aggregation Purpose Used to configure OSPF area aggregation settings. Syntax create ospf aggregation lsdb_type - D-Link DES-3350SR | Reference Manual - Page 335
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create ospf aggregation Description This command is used to for the advertisement trigger to be enabled or disabled. Restrictions Only administrator-level users can issue this command. Usage Example To create an OSPF area aggregation: local - D-Link DES-3350SR | Reference Manual - Page 336
local> DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 336 - D-Link DES-3350SR | Reference Manual - Page 337
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide delete ospf aggregation Purpose Used to delete an OSPF area aggregation configuration. Syntax delete ospf aggregation lsdb_type [summary] Description This command is used to delete an OSPF area aggregation - D-Link DES-3350SR | Reference Manual - Page 338
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Success. local> config ospf aggregation Purpose Used to configure the OSPF area aggregation settings. Syntax config ospf aggregation lsdb_type [summary] advertise [enabled|disabled] Description This command is - D-Link DES-3350SR | Reference Manual - Page 339
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Usage Example: To configure the OSPF area aggregation settings: local>config ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary advertise enabled Command: config ospf aggregation 10.1.1.1 10. - D-Link DES-3350SR | Reference Manual - Page 340
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide OSPF Area Aggregation Settings Area ID Aggregated LSDB [rtrlink|netlink|summary|assummary|asextli nk]} Description This command will display the current OSPF Link State Database (LSDB). Parameters area_id − A 32-bit number in the - D-Link DES-3350SR | Reference Manual - Page 341
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show ospf lsdb Restrictions none. Note: When this command displays a "*" (a star symbol) in the OSPF LSDB table for the Area_id or the Cost, this is interpreted as "no area ID" for external LSAs, and as "no cost given" for the advertised link. - D-Link DES-3350SR | Reference Manual - Page 342
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show ospf neighbor router table. Syntax show ospf neighbor {} Description This command will display the current OSPF neighbor router table. Parameters − The IP - D-Link DES-3350SR | Reference Manual - Page 343
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show ospf virtual_neighbor } Description This command will display the current OSPF virtual neighbor router table. Parameters − A 32-bit number in the form of - D-Link DES-3350SR | Reference Manual - Page 344
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config ospf ipif Purpose Used to configure the OSPF interface settings. Syntax config ospf [ipif /all {area |priority |hello_interval |dead_interval |authentication [none|simple - D-Link DES-3350SR | Reference Manual - Page 345
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config ospf ipif the receipt of Hello packets The Dead Interval must be evenly divisible by the Hello Interval. − A case-sensitive password. − A previously configured MD5 key ID (1 to 255). metric − - D-Link DES-3350SR | Reference Manual - Page 346
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show ospf ipif Purpose Used to display ospf ipif2 Command: show ospf ipif2 Interface Name: ipif2 IP Address: 123.234.12.34|24 (Link Up) Network Medium Type: BROADCAST Metric: 1 Area ID: 1.0.0.0 Administrative State: Enabled Priority: 1 - D-Link DES-3350SR | Reference Manual - Page 347
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local> show ospf all Purpose Used to display the current OSPF settings of all the OSPF interfaces on the switch. Syntax show ospf all Description This command will display the current OSPF settings for all OSPF interfaces on the switch. - D-Link DES-3350SR | Reference Manual - Page 348
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Interface Name: ipif2 IP Address: 123.234.12.34|24 (Link Up) Network Medium Type: BROADCAST Metric: 1 Area ID: 1.0.0.0 Administrative State: Enabled Priority: 1 DR State: DR DR Address: 123.234.12.34 Backup DR Address: None - D-Link DES-3350SR | Reference Manual - Page 349
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config ospf virtual_link Parameters − A 32 Interval must be evenly divisible by the Hello Interval. − A case-sensitive password. − A previously configured MD5 key. A value between 1 and 255 seconds can - D-Link DES-3350SR | Reference Manual - Page 350
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config ospf virtual_link Restrictions Only administrator-level users can issue this command. Usage Example: To configure sec 165535>|dead_interval |authentication [none|simple |md5 ]} This command is used - D-Link DES-3350SR | Reference Manual - Page 351
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create ospf virtual_link Parameters − A 32-bit number in Dead Interval must be evenly divisible by the Hello Interval. − A case-sensitive password. − A previously configured MD5 key ID (1 to 255). 351 - D-Link DES-3350SR | Reference Manual - Page 352
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide create ospf virtual_link Restrictions Only administrator-level users can issue this command This command will delete an OSPF virtual interface from the switch. − A 32-bit number in the form of an IP address - D-Link DES-3350SR | Reference Manual - Page 353
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide delete ospf virtual_link the remote area. This is a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies - D-Link DES-3350SR | Reference Manual - Page 354
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide show ospf virtual_link OSPF domain. − The OSPF router Restrictions none. Usage Example: To display the current OSPF virtual interface configuration: local>show ospf virtual_link Transit Area ID -----------10.0.0.0 Virtual Hello - D-Link DES-3350SR | Reference Manual - Page 355
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 32 SNTP COMMANDS The Simple Network Time Protocol (SNTP) (an adaptation of the Network Time Protocol (NPT 30-99999> Each command is listed, in detail, in the following sections. config sntp Purpose Used to configure SNTP on the switch. 355 - D-Link DES-3350SR | Reference Manual - Page 356
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config sntp Syntax config sntp Description This command is used to configure SNTP on the switch. Parameters primary − This is the primary server the SNTP information will be taken from. − The IP address of the primary server. - D-Link DES-3350SR | Reference Manual - Page 357
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>config sntp primary 10.24.22.5 Command: config sntp primary 10.24.22.5 Success. local> enable sntp Purpose Used to enable SNTP on the switch. Syntax enable sntp Description This command enables SNTP on a switch. Parameters none. - D-Link DES-3350SR | Reference Manual - Page 358
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide disable sntp Purpose Used to disable SNTP on the switch. Syntax disable sntp Description This command will disable SNTP on the switch. Parameters None. Restrictions None. Example Usage: To disable SNTP on the switch: local>disable sntp - D-Link DES-3350SR | Reference Manual - Page 359
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Parameters Restrictions None. None. Example Usage: To show SNTP on the switch: local>show sntp Command: show sntp Current Time Source : System Clock SNTP : Disabled SNTP Primary Server : 10.24.22.5 SNTP Secondary Server : 0.0.0.0 SNTP poll - D-Link DES-3350SR | Reference Manual - Page 360
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 33 COMMAND HISTORY LIST The switch port commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command Parameters ? show command_history dir config - D-Link DES-3350SR | Reference Manual - Page 361
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide ? Description Parameters Restrictions This command will display all of the commands available through the Command Line Interface (CLI). none. none. Usage Example To display all - D-Link DES-3350SR | Reference Manual - Page 362
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config arp_aging time config arpentry CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All show command_history Purpose Used to display the command history. Syntax - D-Link DES-3350SR | Reference Manual - Page 363
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide config router_ports vlan2 add config router_ports vlan2 config router_ports show vlan create vlan vlan2 tag 3 create vlan vlan2 tag 2 show router_ports show router ports login local> dir Purpose Syntax Description Parameters Restrictions Used to - D-Link DES-3350SR | Reference Manual - Page 364
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide clear log config 802.1p default_priority config 802.1p n Next Page Enter Next Entry a All config command_history Purpose Used to configure the command history. Syntax config command_history Description This command - D-Link DES-3350SR | Reference Manual - Page 365
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide local>config command_history 20 Command: config command_history 20 Success. local> 365 - D-Link DES-3350SR | Reference Manual - Page 366
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide A TECHNICAL SPECIFICATIONS General Standards: Protocols: Data Transfer -SX Gigabit Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.1 P|Q VLAN IEEE 802.3 Nway auto-negotiation CSMA|CD Half-duplex 10 Mbps 100Mbps n|a Star Full - D-Link DES-3350SR | Reference Manual - Page 367
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Network Cables: 10BASE-T: 100BASE-TX: General 2-pair UTP Cat. 3,4,5 (100 m) EIA|TIA- 568 100-ohm STP (100 m) 2-pair UTP Cat. 5 (100 m) EIA|TIA-568 100- - D-Link DES-3350SR | Reference Manual - Page 368
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Weight: EMI: Safety: Physical and Environmental mount width 4.4 kg FCC Class A, CE Class A, BSMI Class A, C-Tick Class A CSA International Transmission Method: RAM Buffer: Filtering Address - D-Link DES-3350SR | Reference Manual - Page 369
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide B SWITCH SYSTEM MESSAGES NO. Message 1 "Success." 2 "Error applying data!" 3 "Invalid IP address!" 4 "Invalid subnet mask!" 5 "Invalid gateway address!" 7 "All changes are saved!" 8 "Invalid MAC address!" 9 "No more MAC-Based VLANs can - D-Link DES-3350SR | Reference Manual - Page 370
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 15 "Flow Control is not Enabled!" 16 "Spanning tree group name cannot be empty!" 17 "The IP interface must be deleted first!" 18 "The system interface is not in manual mode!" 19 "The VLAN already has a IP Interface!" 20 "The specified IGMP - D-Link DES-3350SR | Reference Manual - Page 371
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 34 "The EEPROM is full!" 35 "The VLAN has no router ports." 36 "IGMP snooping is disabled in the designated VLAN." 37 "The username is invalid." 38 "Incorrect password" 39 "The specified user already exists. Enter a unique username." Add - D-Link DES-3350SR | Reference Manual - Page 372
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide 55 "Duplicate route! Enter a unique route." 56 "Target port can't be source port!" 57 "This port member can't be set." 58 "Port members must belong to the same VLAN." 59 "The target port can't be selected as a mirror port." 60 "Invalid or - D-Link DES-3350SR | Reference Manual - Page 373
DES-3350SR Layer 3 Fast Ethernet Switch User's Guide Variable Name Password Maxmum Length 15 15 15 15 15 32 128 128 128 15 32 15 64 17 - D-Link DES-3350SR | Reference Manual - Page 374
TOLL FREE (New Zealand): 0800-900900 URL: www.dlink.com.au E-MAIL: [email protected] & [email protected] Level 1, 434 St. Kilda Road, Melbourne, Victoria 3004 Australia TEL: 61-3-9281-3232 FAX: 61-3-9281-3229 MOBILE: 0412-660-064 D-Link Canada 2180 Winston Park Drive, Oakville, Ontario, L6H - D-Link DES-3350SR | Reference Manual - Page 375
de D-Link India Plot No.5, Bandra-Kurla Complex Rd., Off Cst Rd., Santacruz (East), Mumbai, 400 098 India TEL: 91-022-652-6696|6578|6623 FAX: 91-022-652-8914|8476 URL: www.dlink-india.com, www.dlink.co.in & [email protected] E-MAIL: [email protected] D-Link Mediterraneo Srl|D-Link Italia - D-Link DES-3350SR | Reference Manual - Page 376
.com.sg URL: www.dlink-intl.com South Africa D-Link South Africa Unit 2, Parkside, 86 Oak Avenue, Highveld Technopark, Centurion, Gauteng, South Africa TEL: 27 (0) 12-665-2165 FAX: 27 (0) 12-665-2186 URL: www.d-link.co.za E-MAIL: [email protected] Spain D-Link Iberia C|Sabino De Arana, 56 Bajos - D-Link DES-3350SR | Reference Manual - Page 377
U.S.A. D-Link U.S.A. 53 Discovery Drive, Irvine, CA 92618, USA TEL: 1-949-788-0805 FAX: 1-949-753-7033 BBS: 1-949-455-1779 & 1-949-455-9616 INFO: 1-800-326-1688 URL: www.dlink.com E-MAIL: [email protected] & [email protected] - D-Link DES-3350SR | Reference Manual - Page 378
Reseller's full address Answers to the following questions help us to support your product: 1. Where and how will the product primarily be DECnet †Others 4. What network operating system(s) does your organization use ? †D-Link LANsmart †Novell NetWare †NetWare Lite †SCO Unix|Xenix †PC NFS † - D-Link DES-3350SR | Reference Manual - Page 379
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
-
278
-
279
-
280
-
281
-
282
-
283
-
284
-
285
-
286
-
287
-
288
-
289
-
290
-
291
-
292
-
293
-
294
-
295
-
296
-
297
-
298
-
299
-
300
-
301
-
302
-
303
-
304
-
305
-
306
-
307
-
308
-
309
-
310
-
311
-
312
-
313
-
314
-
315
-
316
-
317
-
318
-
319
-
320
-
321
-
322
-
323
-
324
-
325
-
326
-
327
-
328
-
329
-
330
-
331
-
332
-
333
-
334
-
335
-
336
-
337
-
338
-
339
-
340
-
341
-
342
-
343
-
344
-
345
-
346
-
347
-
348
-
349
-
350
-
351
-
352
-
353
-
354
-
355
-
356
-
357
-
358
-
359
-
360
-
361
-
362
-
363
-
364
-
365
-
366
-
367
-
368
-
369
-
370
-
371
-
372
-
373
-
374
-
375
-
376
-
377
-
378
-
379
 |
 |
DES-3350SR
Layer 3 Switch
Command Line Interface
Reference Manual
First Edition (August 2003)
6ES3350SRC01
Printed In Taiwan
RECYCLABLE