D-Link DES-3828 Product Manual - Page 102

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:admin# show scheduling_mechanism Purpose Syntax Used to show the traffic scheduling mechanism. show scheduling_mechanism Description The show scheduling_mechanism command displays the traffic scheduling mechanism. Parameters Restrictions None. None. Example usage: To show scheduling_mechanism: DES-3800:admin# show scheduling_mechanism Command: show scheduling_mechanism Success. DES-3800:admin# config 802.1p user_priority Purpose Syntax Used to map the 802.1p user priority of an incoming packet to one of the eight hardware queues available on the switch. config 802.1p user_priority Description The config 802.1p user_priority command allows you to configure the way the switch will map an incoming packet, based on its 802.1p user priority, to one of the eight available hardware priority queues on the switch. The switch's default setting is to map the incoming 802.1p user priority values to the eight hardware priority queues:. This product supports 8 CoS queues. You can change this mapping by specifying the 802.1p user priority you want by specifying the number of the hardware queue in the parameter. Parameters Restrictions - The 802.1p user priority you want to associate with the (the number of the hardware queue) with. - The number of the switch's hardware priority queue. The switch has n+1 hardware priority queues available. They are numbered between 0 (the lowest priority) and n (the highest priority). Only Administrator or Operator-level users can issue this command. Example usage: To configure the 802.1p user priority: DES-3800:admin# config 802.1p user_priority 1 3 Command: config 802.1p user_priority 1 3 Success. DES-3800:admin# 98