D-Link DES-3828 Product Manual - Page 129
config igmp_snooping querier, config router_ports, Restrictions, Purpose, Syntax
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config igmp_snooping querier Although 1 is specified as a valid entry, the roubustness variable should not be one or problems may arise. last_member_query_interval − The maximum amount of time between group-specific query messages, including those sent in response to leave-group messages. You may lower this interval to reduce the amount of time it takes a router to detect the loss of the last member of a group. state [enable | disable] − Allows the Switch to be specified as an IGMP Querier or Non-querier. Restrictions Only Administrator or Operator-level users can issue this command. Example usage: To configure IGMP snooping: DES-3800:admin#config igmp_snooping querier default query_interval 125 state enable Command: config igmp_snooping querier default query_interval 125 state enable Success. DES-3800:admin# config router_ports Purpose Syntax Description Parameters Restrictions Used to configure ports as router ports. config router_ports [add | delete] This command allows designation of a range of ports as being connected to multicast-enabled routers. This will ensure that all packets with such a router as its destination will reach the multicastenabled router − regardless of protocol, etc. add | delete - Specify whether to add or delete ports as router ports. − The name of the VLAN on which the router port resides. − Specifies a port or range of ports that will be configured as router ports. Only Administrator or Operator-level users can issue this command. Example usage: To set up static router ports: DES-3800:admin#config router_ports default add 1-10 Command: config router_ports default add 1-10 Success. DES-3800:admin# 125