D-Link DES-3828 Product Manual - Page 135

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual 18 802.1X COMMANDS (INCLUDING GUEST VLANS) The DES-3800 implements the server-side of the IEEE 802.1x Port-based and MAC-based Network Access Control. This mechanism is intended to allow only authorized users, or other network devices, access to network resources by establishing criteria for each port on the Switch that a user or network device must meet before allowing that port to forward or receive frames. Command Parameters enable 802.1x disable 802.1x show 802.1x auth_state {ports } show 802.1x auth_configuration {ports } config 802.1x capability ports [ | all] [authenticator | none] config 802.1x auth_parameter ports [ | all] [default | {direction [both | in] | port_control [force_unauth | auto | force_auth] | quiet_period | tx_period | supp_timeout | server_timeout | max_req | reauth_period | enable_reauth [enable | disable]}] config 802.1x init [port_based ports [ | all] | mac_based [ports] [ |all] {mac_address }] config 802.1x auth_mode [port_based | mac_based] config 802.1x reauth {port_based ports [ | all] | mac_based [ports] [ |all] {mac_address }] config radius add key [default | {auth_port | acct_port }] config radius delete config radius {ipaddress | key [auth_port acct_port ]} show radius create 802.1x guest_vlan config 802.1x guest_vlan ports [ | all] state [enable | disable] delete 802.1x guest_vlan {} show 802.1x guest_vlan Each command is listed, in detail, in the following sections. 131