D-Link DES-3828 Product Manual - Page 142
config 802.1x init, Success., DES-3800:admin, DES-3800:admin# config 802.1x init, port_based ports all
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Success. DES-3800:admin# config 802.1x init Purpose Syntax Description Parameters Restrictions Used to initialize the 802.1x function on a range of ports. config 802.1x init {port_based ports [ | all] | mac_based [ports] [ | all] {mac_address }] The config 802.1x init command is used to immediately initialize the 802.1x functions on a specified range of ports or for specified MAC addresses operating from a specified range of ports. port_based - This instructs the Switch to initialize 802.1x functions based only on the port number. Ports approved for initialization can then be specified. mac_based − This instructs the Switch to initialize 802.1x functions based only on the MAC address. MAC addresses approved for initialization can then be specified. ports − Specifies a port or range of ports to be configured. all − Specifies all of the ports on the Switch. mac_address - Enter the MAC address to be initialized. Only Administrator or Operator-level users can issue this command. Example usage: To initialize the authentication state machine of all ports: DES-3800:admin# config 802.1x init port_based ports all Command: config 802.1x init port_based ports all Success. DES-3800:admin# config 802.1x reauth Purpose Syntax Description Parameters Used to configure the 802.1x re-authentication feature of the Switch. config 802.1x reauth {port_based ports [ | all] | mac_based [ports] [ | all] {mac_address }] The config 802.1x reauth command is used to re-authenticate a previously authenticated device based on port number. port_based - This instructs the Switch to re-authorize 802.1x functions based only on the port number. Ports approved for re-authorization can then be specified. mac_based − This instructs the Switch to re-authorize 802.1x functions based only on the MAC address. MAC addresses approved for reauthorization can then be specified. ports − Specifies a port or range of ports to be re-authorized. • all − Specifies all of the ports on the Switch. mac_address - Enter the MAC address to be re- 138