D-Link DES-3828 Product Manual - Page 143

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config 802.1x reauth authorized. Restrictions Only Administrator or Operator-level users can issue this command. Example usage: To configure 802.1x reauthentication for ports 1-18: DES-3800:admin#config 802.1x reauth port_based ports 1-18 Command: config 802.1x reauth port_based ports 1-18 Success. DES-3800:admin# config radius add Purpose Syntax Description Parameters Restrictions Used to configure the settings the Switch will use to communicate with a RADIUS server. config radius add key [default | {auth_port | acct_port }] The config radius add command is used to configure the settings the Switch will use to communicate with a RADIUS server. − Assigns a number to the current set of RADIUS server settings. Up to 3 groups of RADIUS server settings can be entered on the Switch. − The IP address of the RADIUS server. key − Specifies that a password and encryption key will be used between the Switch and the RADIUS server. − The shared-secret key used by the RADIUS server and the Switch. Up to 32 characters can be used. default − Uses the default udp port number in both the "auth_port" and "acct_port" settings. auth_port − The UDP port number for authentication requests. The default is 1812. acct_port − The UDP port number for accounting requests. The default is 1813. Only Administrator-level users can issue this command. Example usage: To configure the RADIUS server communication settings: DES-3800:admin#config radius add 1 10.48.74.121 key dlink default Command: config radius add 1 10.48.74.121 key dlink default Success. DES-3800:admin# 139