D-Link DES-3828 Product Manual - Page 161

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create access_profile (ipv6) Purpose Syntax Description Parameters Restrictions Used to create an access profile on the Switch by examining the IPv6 part of the packet header. Masks can be entered that will be combined with the values the Switch finds in the specified frame header fields. Specific values for the rules are entered using the config access_profile command, below. create access_profile ipv6 profile_id {class | flowlabel | source_ipv6_mask | destination_ipv6_mask }] This command is used to identify various parts of IPv6 packets that enter the Switch so they can be forwarded, filtered or mirrored. profile_id - Specifies an index number between 1 and 8 that will identify the access profile being created with this command. ipv6 - Denotes that IPv6 packets will be examined by the Switch for forwarding or filtering based on the rules configured in the config access_profile command for IPv6. IPv6 packets may be identified by the following: • class - Entering this parameter will instruct the Switch to examine the class field of the IPv6 header. This class field is a part of the packet header that is similar to the Type of Service (ToS) or Precedence bits field in IPv4. • flowlabel - Entering this parameter will instruct the Switch to examine the flow label field of the IPv6 header. This flow label field is used by a source to label sequences of packets such as non-default quality of service or real time service packets. • source_ipv6_mask - Specifies an IP address mask for the source IPv6 address. • destination_ipv6_mask - Specifies an IP address mask for the destination IPv6 address. Only Administrator or Operator-level users can issue this command. 157