D-Link DES-3828 Product Manual - Page 180

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config arp_aging time Purpose Syntax Description Parameters Restrictions Used to configure the age-out timer for ARP table entries on the Switch. config arp_aging time This command sets the maximum amount of time, in minutes, that an ARP entry can remain in the Switch's ARP table, without being accessed, before it is dropped from the table. time − The ARP age-out time, in minutes. The value may be set in the range of 0-65535 minutes with a default setting of 20 minutes. Only Administrator or Operator-level users can issue this command. Example usage: To configure ARP aging time: DES-3800:admin#config arp_aging time 30 Command: config arp_aging time 30 Success. DES-3800:admin# show arpentry Purpose Syntax Description Parameters Restrictions Used to display the ARP table. show arpentry {ipif | ipaddress | static} This command is used to display the current contents of the Switch's ARP table. ipif − The name of the IP interface the end node or station for which the ARP table entry was made, resides on. ipaddress − The network address corresponding to the IP interface name above. static − Displays the static entries to the ARP table. None. Example usage: To display the ARP table: DES-3800:admin#show arpentry Command: show arpentry ARP Aging Time : 30 Interface IP Address MAC Address Type System 10.0.0.0 FF-FF-FF-FF-FF-FF Local/Broadcast System 10.9.68.1 00-A0-C9-A4-22-5B Dynamic System 10.90.90.90 00-01-02-03-04-00 Local System 10.255.255.255 FF-FF-FF-FF-FF-FF Local/Broadcast Total Entries = 4 DES-3800:admin# 176