D-Link DES-3828 Product Manual - Page 189
config route redistribute dst rip src, delete route redistribute, Restrictions, Purpose, Syntax
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config route redistribute dst rip src Restrictions • inter+e1 - Specifies the internal protocol AND type 1 of the external protocol. • inter+e2 - Specifies the internal protocol AND type 2 of the external protocol. metric − Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. Only Administrator or Operator-level users can issue this command. Example usage: To configure route redistributions: DES-3800:admin#config route redistribute dst ospf src rip mettype type_1 metric 2 Command: config route redistribute dst ospf src rip mettype type_1 metric 2 Success. DES-3800:admin# delete route redistribute Purpose Syntax Description Parameters Restrictions Used to delete an existing route redistribute configuration on the Switch. delete route redistribute {dst [rip | ospf] src [rip | static | local | ospf]} This command will delete the route redistribution settings on this switch. dst [rip | ospf] − Allows the selection of the protocol on the destination device. The user may choose between RIP and OSPF. src [rip | static | local | ospf] − Allows the selection of the protocol on the source device. The user may choose between RIP, static, local or OSPF. Only Administrator or Operator-level users can issue this command. Example usage: To delete route redistribution settings: DES-3800:admin#delete route redistribute dst rip src ospf Command: delete route redistribute dst rip src ospf Success. DES-3800:admin# 185