D-Link DES-3828 Product Manual - Page 20

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:admin#show serial_port Command: show serial_port Baud Rate Data Bits Parity Bits Stop Bits Auto-Logout : 9600 : 8 : None : 1 : 10 mins DES-3800:admin# config serial_port Purpose Used to configure the serial port. Syntax config serial_port {baud_rate [9600 | 19200 | 38400 | 115200] | auto_logout [never | 2_minutes | 5_minutes | 10_minutes | 15_minutes]} Description This command is used to configure the serial port's baud rate and auto logout settings. Parameters baud_rate [9600 | 19200 | 38400 | 115200]− The serial bit rate that will be used to communicate with the management host. There are four options: 9600, 19200, 38400, 115200. auto_logout [never | 2_minutes | 5_minutes |10_minutes | 15_minutes Restrictions Only Administrator-level users can issue this command. Example usage: To configure baud rate: DES-3800:admin#config serial_port baud_rate 9600 Command: config serial_port baud_rate 9600 Success. DES-3800:admin# enable clipaging Purpose Syntax Description Parameters Restrictions Used to enable the feature that pauses the scrolling of the console screen when the show command displays more than one page. enable clipaging This command enables the screen to be paused when the show command output reaches the end of the page. The default setting is enable. None. Only Administrator or Operator-level users can issue this command. Example usage: To enable the feature that allows the screen to be paused when the show command output reaches the end of the page: DES-3800:admin#enable clipaging Command: enable clipaging Success. 16