D-Link DES-3828 Product Manual - Page 218

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Virtual Interface Configuration Transit Area ID -------10.0.0.0 10.1.1.1 Virtual Neighbor Router 20.0.0.0 20.1.1.1 Hello Dead Authentication Interval Interval 10 60 None 10 60 None Link Status -----DOWN DOWN Total Entries : 2 OSPF Area Aggregation Settings Area ID Aggregated Network Address LSDB Advertise Type Total Entries : 0 OSPF Host Route Settings Host Address Metric Area ID TOS Total Entries : 0 DES-3800:admin# create ospf area Purpose Syntax Description Parameters Restrictions Used to configure OSPF area settings. create ospf area type [normal | stub {stub_summary [enable | disable] | metric }] This command is used to create an OSPF area and configure its settings. − The OSPF area ID. The user may enter a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. type [normal | stub] − The OSPF area mode of operation − stub or normal. stub_summary [enable | disable] − Enables or disables the OSPF area to import summary LSA advertisements. metric − The OSPF area cost between 0 and 65535. 0 denotes that the value will be automatically assigned. The default setting is 0. Only Administrator or Operator-level users can issue this command. Usage example: To create an OSPF area: DES-3800:admin#create ospf area 10.48.74.122 type normal Command: create ospf area 10.48.74.122 type normal Success. DES-3800:admin# 214