D-Link DES-3828 Product Manual - Page 223
config ospf aggregation, show ospf aggregation
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:admin#delete ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary Command: delete ospf aggregation 10.1.1.1 10.48.76..122/16 lsdb_type summary Success. DES-3800:admin# config ospf aggregation Purpose Syntax Description Parameters Restrictions Used to configure the OSPF area aggregation settings. config ospf aggregation lsdb_type summary {advertise [enable | disable]} This command is used to configure the OSPF area aggregation settings. − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. − The 32-bit number in the form of an IP address that uniquely identifies the network that corresponds to the OSPF Area. lsdb_type summary − Specifies the type of address aggregation. advertise [enable | disable] − Allows for the advertisement trigger to be enabled or disabled. Only Administrator or Operator-level users can issue this command. Usage example: To configure the OSPF area aggregation settings: DES-3800:admin#config ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary advertise enable Command: config ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary advertise enable Success. DES-3800:admin# show ospf aggregation Purpose Syntax Description Parameters Restrictions Used to display the current OSPF area aggregation settings. show ospf aggregation {} This command will display the current OSPF area aggregation settings. − Enter this parameter to view this table by a specific OSPF area ID. None. Usage example: To display OSPF area aggregation settings: DES-3800:admin#show ospf aggregation Command: show ospf aggregation OSPF Area Aggregation Settings 219