D-Link DES-3828 Product Manual - Page 225
show ospf neighbor, show ospf virtual_neighbor, config ospf ipif, Router ID
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show ospf neighbor Parameters Restrictions − The IP address of the neighbor router. None. Usage example: To display the current OSPF neighbor router table: DES-3800:admin#show ospf neighbor Command: show ospf neighbor IP Address of Neighbor 10.48.74.122 Router ID of Neighbor 10.2.2.2 Neighbor Priority -------1 Neighbor State -----------Initial Total Entries: 1 DES-3800:admin# show ospf virtual_neighbor Purpose Syntax Description Parameters Restrictions Used to display the current OSPF virtual neighbor router table. show ospf virtual_neighbor { } This command will display the current OSPF virtual neighbor router table. − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. − The OSPF router ID for the neighbor. This is a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the remote area's Area Border Router. None. Usage example: To display the current OSPF virtual neighbor table: DES-3800:admin#show ospf virtual_neighbor Command: show ospf virtual_neighbor Transit Area ID ------10.1.1.1 Router ID of Virtual Neighbor ----------10.2.3.4 IP Address of Virtual Neighbor 10.48.74.111 Virtual Neighbor State Exchange Total Entries : 1 DES-3800:admin# config ospf ipif Purpose Syntax Used to configure the OSPF interface settings. config ospf [ipif | all] {area | priority | hello_interval | dead_interval | authentication [none | simple | md5 ] | metric | state [enable | disable] | active | 221