D-Link DES-3828 Product Manual - Page 235

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:admin#config time 30jun2003 16:30:30 Command: config time 30jun2003 16:30:30 Success. DES-3800:admin# config time_zone Purpose Syntax Description Parameters Restrictions Used to determine the time zone used in order to adjust the system clock. config time_zone {operator [+ | -] | hour | min } This will adjust system clock settings according to the time zone. Time zone settings will adjust SNTP information accordingly. operator - Choose to add (+) or subtract (-) time to adjust for time zone relative to GMT. hour - Select the number of hours different from GMT. min - Select the number of minutes difference added or subtracted to adjust the time zone. Only Administrator or Operator-level users can issue this command. Example usage: To configure time zone settings: DES-3800:admin#config time_zone operator + hour 2 min 30 Command: config time_zone operator + hour 2 min 30 Success. DES-3800:admin# config dst Purpose Syntax Description Used to enable and configure time adjustments to allow for the use of Daylight Savings Time (DST). config dst [disable | repeating {s_week | s_day | s_mth | s_time start_time hh:mm> | e_week | e_day | e_mth | e_time | offset [30 | 60 | 90 | 120]} | annual {s_date start_date 1-31> | s_mth | s_time | e_date | e_mth | e_time | offset [30 | 60 | 90 | 120]}] DST can be enabled and configured using this command. When enabled this will adjust the system clock to comply with any DST requirement. DST adjustment effects system time for both manually configured time and time set using SNTP service. 231