D-Link DES-3828 Product Manual - Page 240

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:admin# clear port_security_entry port 6 Command: clear port_security_entry port 6 Success. DES-3800:admin# show port_security Purpose Syntax Description Parameters Restrictions Used to display the current port security configuration. show port_security {ports } This command is used to display port security information of the Switch's ports. The information displayed includes port security, admin state, maximum number of learning address and lock mode. − Specifies a port or range of ports to be viewed. None. Example usage: To display the port security configuration: DES-3800:admin#show port_security ports 1-5 Command: show port_security ports 1-5 Port ---1 2 3 4 5 Admin State ----------Disabled Disabled Disabled Disabled Disabled Max. Learning Addr 1 1 1 1 1 Lock Address Mode DeleteOnReset DeleteOnReset DeleteOnReset DeleteOnReset DeleteOnReset CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh enable port_security trap_log Purpose Syntax Description Parameters Restrictions Used to enable the trap log for port security. enable port_security trap_log This command, along with the disable port_security trap_log, will enable and disable the sending of log messages to the Switch's log and SNMP agent when the port security of the Switch has been triggered. None. Only Administrator or Operator-level users can issue this command. Example usage: To enable the port security trap log setting: DES-3800:admin##enable port_security trap_log Command: enable port_security trap_log Success. DES-3800:admin# 236