D-Link DES-3828 Product Manual - Page 248

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:admin#config ssh authmode password enable Command: config ssh authmode password enable Success. DES-3800:admin# show ssh authmode Purpose Syntax Description Parameters Restrictions Used to display the SSH authentication mode setting. show ssh authmode This command will allow you to display the current SSH authentication set on the Switch. None. None. Example usage: To view the current authentication mode set on the Switch: DES-3800:admin#show ssh authmode Command: show ssh authmode The SSH authmode: Password : Enabled Publickey : Enabled Hostbased : Enabled DES-3800:admin# config ssh server Purpose Syntax Description Parameters Restrictions Used to configure the SSH server. config ssh server {maxsession | timeout | authfail | rekey [10min | 30min | 60min | never] This command allows you to configure the SSH server. maxsession - Allows the user to set the number of users that may simultaneously access the Switch. The default setting is 8. contimeout - Allows the user to set the connection timeout. The user may set a time between 120 and 600 seconds. The default is 300 seconds. authfail - Allows the administrator to set the maximum number of attempts that a user may try to logon utilizing SSH authentication. After the maximum number of attempts is exceeded, the Switch will be disconnected and the user must reconnect to the Switch to attempt another login. rekey [10min |30min | 60min | never] - Sets the time period that the Switch will change the security shell encryptions. Only Administrator or Operator-level users can issue this command. Usage example: To configure the SSH server: 244