D-Link DES-3828 Product Manual - Page 249

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:admin# config ssh server maxsession 2 contimeout 300 authfail 2 Command: config ssh server maxsession 2 contimeout 300 authfail 2 Success. DES-3800:admin# show ssh server Purpose Syntax Description Parameters Restrictions Used to display the SSH server setting. show ssh server This command allows you to display the current SSH server setting. None. Only Administrator or Operator-level users can issue this command. Usage Example: To display the SSH server: DES-3800:admin# show ssh server Command: show ssh server The SSH server configuration max Session : 8 Connection timeout : 300 Authfail attempts : 2 Rekey timeout : never port : 22 DES-3800:admin# config ssh user Purpose Syntax Description Parameters Used to configure the SSH user. config ssh user authmode {hostbased [hostname | hostname_IP } | password | publickey] This command allows configuration of the SSH user authentication method. - Enter a username of no more than 15 characters to identify the SSH user. authmode - Specifies the authentication mode of the SSH user wishing to log on to the Switch. The administrator may choose between: • hostbased - This parameter should be chosen if the user wishes to use a remote SSH server for authentication purposes. Choosing this parameter requires the user to input the following information to identify the SSH user. • hostname - Enter an alphanumeric string of up to 32 characters identifying the remote SSH user. • hostname_IP - Enter the hostname and the corresponding IP address of the SSH 245