D-Link DES-3828 Product Manual - Page 254

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual 38 JUMBO FRAME COMMANDS Certain switches can support jumbo frames (frames larger than the standard Ethernet frame size of 1536 bytes). To transmit frames of up to 9K (and 9220 bytes tagged), the user can increase the maximum transmission unit (MTU) size from the default of 1536 by enabling the Jumbo Frame command. The jumbo frame commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command enable jumbo_frame disable jumbo_frame show jumbo_frame Parameters Each command is listed, in detail, in the following sections. enable jumbo_frame Purpose Syntax Description Parameters Restrictions Used to enable the jumbo frame function on the Switch. enable jumbo_frame This command will allow ethernet frames larger than 1536 bytes to be processed by the Switch. The maximum size of the jumbo frame may not exceed 9220 bytes. None. Only Administrator or Operator-level users can issue this command. Example usage: To enable the jumbo frame function on the Switch: DES-3800:admin#enable jumbo_frame Command: enable jumbo_frame Success. DES-3800:admin# disable jumbo_frame Purpose Syntax Description Parameters Restrictions Used to disable the jumbo frame function on the Switch. disable jumbo_frame This command will disable the jumbo frame function on the Switch. None. Only Administrator or Operator-level users can issue this command. Example usage: To enable the jumbo frame function on the Switch: 250