D-Link DES-3828 Product Manual - Page 257

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual

NOTE:

TACACS, XTACACS and TACACS+ are separate entities and are not

compatible. The Switch and the server must be configured exactly the same, using the

same protocol. (For example, if the Switch is set up for TACACS authentication, so

must be the host server.)

The Access Authentication Control commands in the Command Line Interface (CLI) are listed (along with the appropriate

parameters) in the following table.

Command

Parameters

enable authen_policy

disable authen_policy

show authen_policy

create authen_login method_list_name

<string 15>

config authen_login

[default | method_list_name <string 15>] method {tacacs |

xtacacs | tacacs+ | radius | server_group <string 15> | local |

none}

delete authen_login method_list_name

<string 15>

show authen_login

{default | method_list_name <string 15> | all}

create authen_enable method_list_name

<string 15>

config authen_enable

[default | method_list_name <string 15>] method {tacacs |

xtacacs | tacacs+ | radius | server_group <string 15> |

local_enable | none}

delete authen_enable method_list_name

<string 15>

show authen_enable

[default | method_list_name <string 15> | all]

config authen application

{console | telnet | ssh | http | all] [login | enable] [default |

method_list_name <string 15>]

show authen application

create authen server_group

<string 15>

config authen server_group

[tacacs | xtacacs | tacacs+ | radius | <string 15>] [add | delete]

server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ |

radius]

delete authen server_group

<string 15>

show authen server_group

<string 15>

create authen server_host

<ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius] {port <int

1-65535> | key [<key_string 254> | none] | timeout <int 1-255> |

retransmit <int 1-255>}

config authen server_host

<ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius] {port <int

1-65535> | key [<key_string 254> | none] | timeout <int 1-255> |

retransmit <int 1-255>}

delete authen server_host

<ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius]

show authen server_host

config authen parameter response_timeout

<int 0-255>

config authen parameter attempt

<int 1-255>

show authen parameter

enable admin

253

Section	Page
INTRODUCTION	5
Using the Console CLI	7
Command Syntax	11
Basic Switch Commands	13
Switch Port Commands	31
SNMP V3	35
PoE Commands	49
Network Management Commands	54
Switch Utility Commands	62
Network Monitoring Commands	73
Layer 2 FDB Commands	86
Packet Storm Control Commands	94
QoS Commands	98
Mirror Configuration Commands	106
VLAN Commands	109
Link Aggregation Commands	123
IGMP Snooping Commands	127
802.1X Commands (Including Guest VLANs)	135
Access Control List (ACL) Commands	148
Traffic Segmentation Commands	168
Command List History	170
Basic IP Commands (For Layer 3)	173
ARP Commands	178
Routing Table Commands	182
Route Redistribution Commands	185
RIP Commands	191
IGMP Commands	195
Auto Config Commands V3	199
DNS Relay Commands	201
DVMRP Commands	205
IP Multicasting Commands	210
MD5 Commands	213
OSPF Configuration Commands	215
Time and SNTP Commands	232
Port Security Commands	238
MAC Notification Commands	242
SSH Commands	246
Jumbo Frame Commands	254
Access Authentication Control Commands	256
D-Link Single IP Management Commands	279
Multiple Spanning Tree Protocol (MSTP) Commands	289
SSL Commands	301
VRRP Commands	307
System Severity	316
DHCP Relay	318
IP-MAC Binding Commands	324
LACP Configuration Commands	338
CPU Interface Filtering (Software ACL) Commands	340
Modify Prompt and Banner Commands	348
Safeguard Engine	351
WRED Command List	353
Web-based Access Control (WAC) Commands	357
Double VLAN Command List	363
Limited Multicast IP Address Commands	368
Route Preference Commands	373
MAC-Based Access Control Commands	376
PIM Commands	385
Loopback Interface Commands	402
DHCP Server Command List	405
MLD Snooping Commands	421
Loopback Detection Commands	428
Password Recovery Commands	433
Multicast VLAN Commands	436
CPU Filtering Commands List	439
Broadcast Segmentation Commands	441
Technical Specifications	443

D-Link DES-3828 Product Manual - Page 257

server_host <ipaddr> protocol [tacacs | xtacacs | tacacs, delete authen server_group

Page 257 highlights