D-Link DES-3828 Product Manual - Page 271
delete authen server_host, Restrictions, Purpose, Syntax, Description, Parameters
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 271 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual delete authen server_host RADIUS protocol. Restrictions Only Administrator-level users can issue this command. Example usage: To delete a user-defined TACACS+ authentication server host: DES-3800:admin#delete authen server_host 10.1.1.121 protocol tacacs+ Command: delete authen server_host 10.1.1.121 protocol tacacs+ Success. DES-3800:admin# show authen server_host Purpose Syntax Description Parameters Restrictions Used to view a user-defined authentication server host. show authen server_host This command is used to view user-defined authentication server hosts previously created on the Switch. The following parameters are displayed: IP Address - The IP address of the authentication server host. Protocol - The protocol used by the server host. Possible results will include TACACS, XTACACS, TACACS+ or RADIUS. Port - The virtual port number on the server host. The default value is 49. Timeout - The time in seconds the Switch will wait for the server host to reply to an authentication request. Retransmit - The value in the retransmit field denotes how many times the device will resend an authentication request when the TACACS server does not respond. This field is inoperable for the tacacs+ protocol. Key - Authentication key to be shared with a configured TACACS+ server only. None. None. Example usage: To view authentication server hosts currently set on the Switch: DES-3800:admin#show authen server_host Command: show authen server_host IP Address ----------10.53.13.94 No Use Protocol -------TACACS Port Timeout Retransmit Key 49 5 2 No Use Total Entries : 1 DES-3800:admin# 267