D-Link DES-3828 Product Manual - Page 272

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create authen server_group Purpose Syntax Description Parameters Restrictions Used to create a user-defined authentication server group. create authen server_group This command will create an authentication server group. A server group is a technique used to group TACACS/XTACACS/TACACS+/RADIUS server hosts into user defined categories for authentication using method lists. The user may add up to eight (8) authentication server hosts to this group using the config authen server_group command. - Enter an alphanumeric string of up to 15 characters to define the newly created server group. Only Administrator-level users can issue this command. Example usage: To create the server group "group_1": DES-3800:admin#create authen server_group group_1 Command: create authen server_group group_1 Success. DES-3800:admin# config authen server_group Purpose Syntax Description Parameters Used to configure a user-defined authentication server group. config authen server_group [tacacs | xtacacs | tacacs+ | radius | ] [add | delete] server_host protocol [tacacs | xtacacs | tacacs+ | radius] This command will configure an authentication server group. A server group is a technique used to group TACACS/XTACACS/TACACS+/RADIUS server hosts into user defined categories for authentication using method lists. The user may define the type of server group by protocol or by previously defined server group. Up to eight (8) authentication server hosts may be added to any particular group server_group - The user may define the group by protocol groups built into the Switch (TACACS/XTACACS/TACACS+/RADIUS), or by a user-defined group previously created using the create authen server_group command. ƒ tacacs - Use this parameter to utilize the built-in TACACS server protocol on the Switch. Only server hosts utilizing the TACACS protocol may be added to this group. ƒ xtacacs - Use this parameter to utilize the built-in XTACACS server protocol on the Switch. Only server hosts utilizing the XTACACS protocol may be added to this group. ƒ tacacs+ - Use this parameter to utilize the built-in TACACS+ server protocol on the Switch. Only server hosts utilizing the TACACS+ protocol may be added to this group. ƒ radius - Use this parameter to utilize the built-in RADIUS server protocol on the Switch. Only server hosts utilizing the RADIUS protocol may be added to this group. ƒ - Enter an alphanumeric string of up to 15 characters to define the previously created server group. This group may add any 268