D-Link DES-3828 Product Manual - Page 275
config authen parameter attempt, show authen parameter
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 275 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Success. DES-3800:admin# config authen parameter attempt Purpose Syntax Description Parameters Restrictions Used to configure the maximum number of times the Switch will accept authentication attempts. config authen parameter attempt This command will configure the maximum number of times the Switch will accept authentication attempts. Users failing to be authenticated after the set amount of attempts will be denied access to the Switch and will be locked out of further authentication attempts. Command line interface users will have to wait 60 seconds before another authentication attempt. Telnet users will be disconnected from the Switch. parameter attempt - Set the maximum number of attempts the user may try to become authenticated by the Switch, before being locked out. Only Administrator-level users can issue this command. Example usage: To set the maximum number of authentication attempts at 5: DES-3800:admin# config authen parameter attempt 5 Command: config authen parameter attempt 5 Success. DES-3800:admin# show authen parameter Purpose Used to display the authentication parameters currently configured on the Switch. Syntax show authen parameter Description This command will display the authentication parameters currently configured on the Switch, including the response timeout and user authentication attempts. This command will display the following fields: Response timeout - The configured time allotted for the Switch to wait for a response of authentication from the user attempting to log in from the command line interface or telnet interface. User attempts - The maximum number of attempts the user may try to become authenticated by the Switch, before being locked out. Parameters None. Restrictions None. Example usage: To view the authentication parameters currently set on the Switch: DES-3800:admin#show authen parameter Command: show authen parameter 271