D-Link DES-3828 Product Manual - Page 29
telnet, config terminal line, config terminal_line [default | <value 20-80>] - default ip
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual telnet Purpose Syntax Description Parameters Restrictions Used to Telnet another device on the network. telnet {tcp_port } This command is used to connect to another device's management through Telnet. - Enter the IP address of the device to connect through, using Telnet. tcp_port - Enter the TCP port number used to connect through. The common TCP port number for telnet is 23. None. Example usage: To connect to a device through telnet with a IP address of 10.53.13.99: DES-3800:admin#telnet 10.53.13.99 tcp_port 23 Command: telnet 10.53.13.99 tcp_port 23 config terminal line Purpose Syntax Description Parameters Restrictions Used to configure the number of rows which can be displayed at a screen. config terminal_line [default | ] Used to configure the number of rows which can be displayed on the screen. Default value is 24. None. Only Administrator or Operator-level users can issue this command. Example usage: To configure a terminal_line: DES-3800:admin# config terminal_line 30 Command: config terminal_line 30 Success. DES-3800:admin# show terminal line Purpose Syntax Description Parameters Restrictions Used to display the number of rows which can be displayed at a screen. show terminal_line Used to display the number of rows which can be displayed on the screen. None. None. Example usage: 25