D-Link DES-3828 Product Manual - Page 349

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config greeting_message Purpose Syntax Description Parameters Restrictions Used to configure the greeting message or banner for the opening screen of the Command Line Interface. config greeting_message {default} This command is used to configure the greeting message or login banner for the opening screen of the CLI. default - Adding this parameter will return the greeting command to its original factory default configuration. The reset command will not alter the configured greeting message, yet the reset system command will return the greeting message to its original factory default setting. The maximum character capacity for the greeting banned is 6 lines and 80 characters per line. Entering Ctrl+W will save the current configured banner to the DRAM only. To enter it into the FLASH memory, the user must enter the save command. Only Administrator or Operator-level users can issue this command. Example usage: To configure the greeting message: DES-3800:admin#config greeting_message Command: config greeting_message Greeting Messages Editor DES-3828 Fast Ethernet Switch Command Line Interface Firmware: Build 4.50.B10 Copyright(C) 2000-2005 D-Link Corporation. All rights reserved Ctrl+C Quit without save left/right/ Ctrl+W Save and quit up/down Move cursor Ctrl+D Delete line Ctrl+X Erase all setting Ctrl+L Reload original setting Success. DES-3800:admin# 345