D-Link DES-3828 Product Manual - Page 377
enable mac_based_access_control, To disable MAC-Based Access Control globally on the Switch.
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 377 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command Parameters create mac_based_access_control_local mac config mac_based_access_control_local mac delete mac_based_access_control_local show mac_based_access_control_local show mac_based_access_control auth_mac vlan vlan [mac | vlan ] {[mac | vlan
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
373
Command
Parameters
create mac_based_access_control_local mac
<macaddr> vlan <vlan_name 32>
config mac_based_access_control_local mac
<macaddr> vlan <vlan_name 32>
delete mac_based_access_control_local
[mac <macaddr> | vlan
<vlan_name 32>]
show mac_based_access_control_local
{[mac <macaddr> | vlan <vlan_name 32]}
show mac_based_access_control auth_mac
{ports <portlist>}
Each command is listed, in detail, in the following sections.
enable mac_based_access_control
Purpose
Used to enable the MAC-based Access Control on the Switch.
Syntax
enable mac_based_access_control
Description
This command, along with the
disable mac_based_access_control
command is used to enable and disable MAC-based Access Control
globally on the Switch.
Parameters
None.
Restrictions
Only Administrator or Operator-level users can issue this command.
Example usage:
To enable MAC-based Access Control globally on the Switch.
DES-3800:admin#enable mac_based_access_control
Command: enable mac_based_access_control
Success.
DES-3800:admin#
disable mac_based_access_control
Purpose
Used to disable the MAC-based Access Control on the Switch.
Syntax
disable mac_based_access_control
Description
This command, along with the
enable mac_based_access_control
command is used to enable and disable MAC-based Access Control
globally on the Switch.
Parameters
None.
Restrictions
Only Administrator or Operator-level users can issue this command.
Example usage:
To disable MAC-Based Access Control globally on the Switch.
DES-3800:admin#disable mac_based_access_control
Command: disable mac_based_access_control
Success.
DES-3800:admin#