D-Link DES-3828 Product Manual - Page 388
config pim, config pim [[ipif <ipif_name 12> | all] {hello <sec 1-18724>
UPC - 790069276811
View all D-Link DES-3828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 388 highlights
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config pim Purpose Syntax Description Parameters Restrictions Used to configure the parameters for the PIM protocol. config pim [[ipif | all] {hello | jp_interval | state [enable | disable] | mode [dm | sm] | dr_priority }] This command will configure the general settings for the PIM protocol per IP interface, including choice of PIM mode, Designated Router priority and various timers. ipif - Enter an IP interface for which to configure the PIM settings. This name cannot exceed 12 alphanumeric characters. all - Select this parameter to configure PIM settings for all IP interfaces on the Switch. hello - Used to set the interval time between the sending of Hello Packets from this IP interface to neighboring routers one hop away. These Hello packets are used to discover other PIM enabled routers and state their priority as the Designated Router (DR) on the PIM enabled network. The user may state an interval time between 1 - 18724 seconds with a default interval time of 30 seconds. jp_interval - This field will set the interval time between the sending of Join/Prune packets stating which multicast groups are to join the PIM enabled network and which are to be removed or "pruned" from that group. The user may state an interval time between 1 - 18724 seconds with a default interval time of 30 seconds. state [enable | disable] - Used to enable or disable PIM for this IP interface. The default is Disabled. mode [dm | sm] - Used to select the type of PIM protocol to use, Sparse Mode (SM) or Dense Mode (DM). The default setting is DM. dr_priority - Enter the priority of this IP interface to become the Designated Router for the multiple access network. The user may enter a DR priority between 0 and 4,294,967,294 with a default setting of 1. Only Administrator or Operator-level users can issue this command. Example usage: To configure the PIM settings for an IP interface: DES-3800:admin#config pim ipif Trinity hello 60 jp_interval 60 state enable mode sm dr_priority 2 Command: config pim ipif Trinity hello 60 jp_interval 60 state enable mode sm dr_priority 2 Success. DES-3800:admin# 384